VMWare是一个完全的系统模拟器(在本文中，术语“模拟器(emulator)”和“仿真器(virtualizer)”可以自由互换，都是指“完成对某个系统的模拟的软件”)。
VMWare is a full system emulator (in this article, we are freely interchanging the term "emulator" with "virtualizer" to refer "software that does emulation of a system").
作为舰艇航行操作仿真训练系统课题的关键组成部分，它提供了一个用软件模拟传统硬件的方法，结果表明是确实可行的。
As a key com-ponent of vessels simulation - training system, it offers a piece of method which using software to imitate classical hardware, and indi-cating to be really feasible.
利用IBMPC汇编语言在PC机上模拟实现了部分软件的测试，同时采集了基于累积失效时间的软件失效仿真试验数据。
And the software failure data is collected in the process of software testing simulation, which is realized by using the IBM PC assembly language to execute the test on PC.
磁盘驱动器的设计者可以利用ANSYSFSI进行双向耦合流体结构仿真，该软件具备在单一的模拟环境下优化设备的能力。
Disk drive designers use ANSYS FSI solutions to conduct two-way coupled fluid-structure simulation, which provides the ability to optimize devices in a single simulation environment.
软件以参数设置、数据文件生成、过程模拟、结果分析和显示输出模块按流程走向相互联系，完成仿真的总体功能。
Result: The software play full function of simulation with sequence of setting parameter, generating dada documents, simulation of progress and output results.
利用FIRE软件建立了某柴油机螺旋进气道的三维仿真模型，对进气流动进行了CFD模拟计算。
The three-dimensional simulation model of the spiral inlet duct of a diesel engine is created with the FIRE software, and CFD simulation of inlet flow is carried out.
开关类部件的仿真是为了在虚拟的接口实验平台上，以计算机软件模拟实际环境进行科学实验。
Switch emulation is to carry on scientific experiment with simulating the real environment by computer software, at the virtual interface experiment platform.
手机软件仿真平台的目的主要是实现手机软件界面部分的模拟，使得在模拟器中开发的代码可以移植到实际的手机上去。
The main objective of mobile software simulation platform was to realize the interface simulation in order that the code developed by simulator can be immigrated to the real mobile.
从试验设计角度出发，借助动力学仿真软件ADAMS开发的内弹道计算模块，对内弹道循环进行了随机模拟。
From view of design of experiment, the random simulation of interior ballistics repetition is done using the interior ballistic computing module developed by the dynamic simulation software-ADAMS.
探讨了用电子模拟仿真软件EWB分析、设计电路的一般方法及一些参数的设置。
The paper attempts to introduce the method of circuit analysis and circuit design with electronic simulation software EWB (Electronics Workbench) and setting up for some parameters.
NASTRAN和ADAMS软件仿真模拟了新一代大运载火箭整流罩不同设计方案的地面分离，并与试验结果进行了比较。
The separation simulation of different fairing designed of new generation launch vehicle by means of MSC. NASTRAN and MSC. ADAMS software was computed, and compared with the ground test result.
网络虚拟实验室顺时代潮流而生，它是用软件仿真来模拟已经存在和使用的设备，甚至创造出一些具有实用价值的、虚拟的逻辑仪器设备。
The virtual network Lab is coming as the times require, there are the instruments which simulated by software, it can generate some valuable and virtual Logic instruments as even.
经过利用商用电路模拟软件进行性能仿真所得的结果与测试结果相符，显示出良好的准确性和可等效替代性。
The simulation results with this equivalent circuit model of SMPDP in commercial software PSpice show high compatibility with former experiment results, which helps us to certify its preciseness.
运用流体力学仿真软件对传感器排水罩的排水效果进行了流场模拟，验证了排水罩结构设计的可行性。
The flow field of the drainage cover of the sensor was simulated by using a fluid mechanics simulation software, the feasibility of drainage cover structure design was validated.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
在此基础上以楔形齿为对象研究了偏心单牙轮钻头井底破岩轨迹的形成，并编制了井底轨迹图仿真软件以模拟牙齿的凿岩轨迹。
The formation of the bottom hole rock-disintegrating track of the mono-cone bit with wedge teeth was studied, and simulation software for the track pattern was developed.
以提高无线电引信抗高功率微波干扰的能力为应用背景，采用基于时域有限差分方法（FDTD）的电磁场仿真软件XFDTD6.0，数值模拟高功率微波（HPM）的孔缝耦合特性。
To have radio fuze making better resistance to HPM jamming, the slot coupling characteristics of HPM pulse into cavity are studied by using the software XFDTD6.0 based on the method of FDTD.
本论文主要内容是研究并建立调距桨船舶推进系统的实时操作仿真模型，并在此基础上设计开发调距桨船舶推进系统操作模拟器仿真软件。
The main contents of this thesis are to study and set up real-time operation simulator of CPP ship's propulsion system, design and develop emulational software for the system.
运用DEFORM软件建立仿真模型进行模拟分析，对圆锥套圈的成对闭式冷辗扩的可行性和优势进行了验证。
Using the DEFORM software, the simulation model was established and analyzed, the feasibility and the superiority of the closed type cold rolling with pair taper ferrule were justified.
已有许多专用流程模拟(仿真)软件应用于石油和天然气化工工业设施的设计和优化。
There are a number of special processes simulation softwares have been used in design and optimization of commercial installations for petroleum and natural gas chemical engineering.
用自开发的有限元仿真软件包模拟计算电极对间的电容值，确定12电极电容层析成像系统的灵敏场分布。
A finite element simulation software is developed, which is used to calculate capacitance between electrodes and define the sensitivity distribution of 12 electrode capacitance tomography system.
本文的工作主要由以下四部分组成：小型制冷装置蒸发器的实验研究、仿真软件的开发、蒸发器性能研究和CFD软件模拟。
In this paper, four parts are included as follows: experiment research, development of the simulation software, performance analysis and simulation with CFD.
采用PHEONICS数值仿真软件，对热电冰箱的无负载瞬态工作、有负载稳态和瞬态工作时箱内温度场和流场进行了数值模拟。
In steady and transient state, air temperature field and flow field inside the thermoelectric refrigerator, loaded and no loaded, are calculated by using a CFD software PHEONICS.
最后，利用DSP相关软件，对转子初始位置估算方法进行模拟仿真，验证了高频电压信号注入法理论的正确性。
Finally, the paper simulated to the rotor initial point estimate method using DSP related tool and confirmed the accuracy of high frequency voltage signal method.
通过以上两种不同的模拟方法，本论文分别阐述了拉伸破坏实验、压缩破坏实验以及电测法测定材料弹性模量和泊松比的仿真软件设计与开发的方法。
Through the two different methods, this paper discusses how to develop the experimental simulation software: tensile test, compressive test, strain measurement of Young modulus and Poisson ratio.
此外，利用有限元ansys软件对PC B组件在整个红外再流焊炉中的焊接过程建立了实体模型，进行了PC B组件再流焊全过程的三维动态模拟和仿真。
Furthermore, the soldering process of PCBA in the whole infrared reflow soldering stove is modeled by the finite element software, ANSYS, and is simulated by the three-dimensional modelling.
应用大型有限元分析软件ANSYS，模拟箱形梁水泥水化生热和对流边界条件，进行混凝土水化热温度场仿真计算，并与实测数据进行对比分析。
The temperature field of concrete box girder is analyzed by means of the finite element analysis software ANSYS. The computational results are compared with the experimental results.
斯沃数控仿真软件能对数控机床的电气装配、调试、故障排除等过程进行仿真模拟，可很好地满足数控机床维修课程的教学需求。
Swansoft CNC Simulator can simulate the process of CNC working, such as electrical connection, adjustment, trouble shooting and so on, so it is a good tool of assisted instruction.
斯沃数控仿真软件能对数控机床的电气装配、调试、故障排除等过程进行仿真模拟，可很好地满足数控机床维修课程的教学需求。
Swansoft CNC Simulator can simulate the process of CNC working, such as electrical connection, adjustment, trouble shooting and so on, so it is a good tool of assisted instruction.
应用推荐