它可以根据正交输出型编码器信号的相位关系，输出具有正负极性的模拟电压信号。
The circuit can output analog voltage signals with positive and negative polarity according to the phase relation of encoder signals of orthogonal output type.
电力计量直接的对象是电子互感器，IEC标准统一规定了电子互感器的两种输出方式：数字瞬时值序列和模拟电压信号。
The direct object of power metering is electronic transformer. From IEC standards, electronic transformer has two kinds of output: digital signals and analog signals.
由于单片机所处理的信号是数字信号，对模拟电压信号进行检测处理时首先要用A／D转换器件对其进行A／D转换，然后再进行处理。
Since the signal which is disposed by the SCM usually is the Digital Signals, before the Analog signals are checked by the processor, they must be conversed by the A/D converter.
多功能芯片ADT14既是一种输出逻辑电平控制信号的多点温度监控器，又是一种输出模拟电压信号的温度传感器，可广泛应用于各种嵌入控制系统中。
The multi-functional chip ADT14 is a kind of multi-point temperature monitor of outputting logic level control signal, It is also a kind of temperature sensor of outputting simulated voltage signal .
输入模拟信号立即与所有的参考电压通过一串高速比较器进行比较，高速比较器用于产生二进制输出。
The analog signal is compared with all the reference voltages at once by a string of high-speed comparators whose outputs are used to generate the binary output.
在混合信号电路中，考虑到功耗和性能的要求，数字电路低电压工作而模拟电路高电压工作；
In mix signal circuits, digital circuits operate at a lower voltage and analog circuits at a higher one, so as to meet the requirement of power dissipation and performance.
该系统能够同时模拟频率类、电压类、电流类等多种信号，还能同时检测电子仪表的精度。
The system can be used to analog signals of frequency, voltage, current simultaneously etc. Meanwhile it can be used to detect precision of the meters.
控制和保护回路模拟信号的电压都低于24V直流。
The voltage of the analog signals in control and protection circuits are all below DC 24V.
通过显示器显示传输的数据，提供激发电压并传输模拟信号用于远程记录、警示或控制。
The customized LEVEL MATE II meter displays data from the transmitter, provides excitation voltage and transmits an analog signal for remote recording, alarm or control functions.
合并器除了可以接收并处理来自多个采集器的数字信号外，还可以接收并处理电磁式互感器提供的电压、电流模拟量。
The combiner can not only receive and handle the digital signal from many collectors but also the analog variable of current and voltage provided by the electromagnetic transformer.
采用电压频率变换和频率电压变换技术处理模拟信号，有效的克服了光电耦合器的非线性，实现了模拟信号的线性光电隔离。
Analog signal linear photo-isolation is carried out by using voltage-frequency conversion and frequency-voltage conversion technique so as to effectively overcome nonlinearity of the photocoupler.
特别涉及一种直接把电池电压模拟信号数字化成相关数字信号的电路。
In particular to such a circuit that directly digitizes analog battery cell voltage levels into associated digital signals.
扫描探针显微镜- d21提供自动频率，相位和电压匹配使用模拟或离散输出信号。
The SPM-D21 provides automatic frequency, phase and voltage matching using either analog or discrete output signals.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
通过参数的灵活设计，可以满足不同的输出电压隔离要求，应用于不同的模拟信号隔离场合。
By flexible design of the parameters, the circuit can satisfy different requirements of output voltage, and it is excellent solution for many analog isolation problems.
最后，利用DSP相关软件，对转子初始位置估算方法进行模拟仿真，验证了高频电压信号注入法理论的正确性。
Finally, the paper simulated to the rotor initial point estimate method using DSP related tool and confirmed the accuracy of high frequency voltage signal method.
模拟信号须转换成适合于变换到数字形式的电压信号。
The analog signals must be converted to voltage signals suitable for conversion to digital form.
当你对一个模拟端口采样时，它会返回一个与信号针脚（脚3）上的电压成比例的，范围在0至1023之间的值。
When you sample an analog port it will return a value between 0 and 1023, proportional on the voltage (05 volts) on the signal pin (pin 3).
多种波形发生器和背靠背模拟装 置通过多路高压引线电缆将电压信号引入烘箱，施加到试品上；
The multi-waveform generator and the back-to-back simulator introduce a voltage signal into the ovens through a plurality of high voltage leads and apply the voltage on a sample;
该实验室目前配有10台苹果一体机，以及数十套模拟示波器、信号源、电压源等仪器。
There are 10 sets of All-in-One APPLE IMAC in this lab, with dozens of sets of analog oscilloscopes, signal source, a voltage source and other equipment.
整套系统将二维位敏探测器输出的电流模拟信号，转换成电压信号，并接进行放大处理。
For the current signal of PSD (Position Sensitive Detectors), the system translates it to voltage signal, which then is amplified to a suitable scope.
模拟电路部分包括：电池电源供电模块、信号采集电路、模拟滤波和放大电路、增益调节电路、地电压抬升电路和A/D输入信号限制电路。
The analog circuit consists of power-supply modular, signal pickup circuit, analog filter amplifier, gain control circuit, power ground lifting circuit and signal limit circuit of A/D channel.
第 二选择单元依据N位数字信号的N-M个最低位，选择第二组参考电压之一作为输出模拟电压。
The second selected element selects one of the second groups of voltage references as an output analog voltage according to N-M least significant bits of the N-bit digital signal.
第 二选择单元依据N位数字信号的N-M个最低位，选择第二组参考电压之一作为输出模拟电压。
The second selected element selects one of the second groups of voltage references as an output analog voltage according to N-M least significant bits of the N-bit digital signal.
应用推荐