该系统以PHILIPS公司LPC2132芯片为核心，集成温度、压力、频率和振幅模拟放大电路，步进电机驱动单元。
This system took LPC2132 chip of PHILIPS as its main processor, including temperature pressure frequency and swing analog circuit and step motor driving module.
放大电路的频率特性是模拟电子技术的主要内容之一。
The frequency particularity of enlarged circuit is an important content of analogue electron technology.
目前高等院校在模拟电子技术课程中对于负反馈放大电路稳定性进行分析时，一般采用波特图的分析方法。
The stability of feedback of amplifier circuit is often analyzed with bode in Simulation Electron and Technology in the advanced institutes.
本文以基本放大电路为例说明EW B在模拟电子技术教学中的辅助作用。
In this text, it introduces that assistance function of EWB in the analog electronics technique teaching, taking basic enlarge circuit as an example.
在《模拟电子技术》的课程教学中，基本放大电路是教学的重点和难点之一，更是课程后续内容学习的基础。
Basic amplifying circuit is one of teaching emphases and difficulties in Analog Electronic Technology course as well as the theoretic foundation of the follow-up courses.
基本放大电路的动态分析是模拟电子技术教学中的一个重点，同时也是一难点。
One of the difficult and key items in analog electronics teaching is the dynamic analysis of basic amplifying circuit.
用集成温度传感器ad5 90测量温度，通过模拟电路调零和放大，其温度由数字毫伏表直接显示。
The temperature is measured with an integrated temperature sensor AD590, amplified and zeroed through an analog circuit, displayed directly by a digital voltmeter.
基于斜率故障模型，提出了一种诊断模拟电路中基于闭环集成运算放大器的模块级软故障的字典法。
Based on the slope fault model, this paper presents a fault dictionary method for soft fault diagnosis of modular analog circuit based on closed-loop operational amplifier (CLOA).
在第五学期我们学了半导体基础知识、交流放大电路、逻辑电路、模拟电路和数字电路的转换。
In the fifth semester, we learned fundamental knowledge of semiconductors, AC circuit amplifier, and the switching among logic circuit, analog circuit and digital circuit.
下位机以80C196KC为核心，外扩程序存储器、数据存储器、I/O接口电路和模拟信号放大器等电路。
On the core of 80C196KC, the single-chip-computer is extended for program store, data store, I/O interface circuit and analog signals amplifier etc.
模拟输入电路包含模拟多路复用器，仪表放大器，以及采样保持电路。
The analog input circuitry contains the analog multiplexer, the instrumentation amplifier, and the sample-and-hold circuitry.
通过对运算放大器的分折，结合运算放大器的外围电路，从理论上证明了用运算放大器组成的有源rc电路可以实现模拟电感。
By analyzing operational amplifier and its external circuit, it is theoretically proved that simulator inductance can be implemented with passive rc circuits composed of operational amplifiers.
用设计的电路进行了时间间隔模拟放大测量，测量结果和理论计算基本一致。
The simulated measurement is carried out by designed time amplifying circuit. The measurement result is basically in agreement with that of theory analysis.
模拟电路部分分别对放大和滤波进行了设计和开发。
In the part of analog circuit designing, the paper designed and developed amplifier and filter circuit.
本文还对仪器前端模拟输入通道所涉及的一些关键技术进行了深入研究，研究内容主要包括高频电路设计理论和高速放大器技术。
The associated key technology of electron apparatus's front analog input circuit is deeply researched, including high frequency circuit theoretic and high speed amplifier.
该电路的模拟部分包括电荷放大器、后级放大电器、相关双取样与采样保持电路、积分器、单位增益缓冲器。
The analog part includes self-test circuit, charge amplifier, post-amplifier circuit, CDS and S/H circuit, integrator, unity gain buffer.
运算放大器作为模拟电路单元的核心模块，它的重要性日益受到人们的重视。
As the nuclear module of the unit of analogue circuits, people pay more and more attention to it.
基于运算放大器和模拟集成电路的电路设计，第3版，习题答案。
Design with Operational Amplifiers and Analog Integrated Circuits, 3rd edt. by Franco, Sergio - solution manual.
运用一阶单时间常数低通函数模拟运算放大器的开环增益，对RC桥式振荡电路进行线性分析，得出最大振荡频率为运算放大器增益带宽积的16.67%。
The maximum frequency of RC-bridge oscillator is 16.67% of gain bandwidth product of amplifier analyzed based on a first-order single time constant lowpass function model.
实现给定传递函数的模拟电路一般包含若干个运算放大器及电阻、电容等元器件。
The analog electronic circuit implementing the known transfer function contains some operational amplifiers, resistors and capacitors.
该系统包括信号检测、放大、转换、存贮、数字显示、模拟曲线显示、报警等电路。
The System included testing of signals, amplification, changing, store and digital display, analogic-curve display, warning, and so on.
熟悉各种基本模拟集成电路设计与分析，比如放大器、比较器、参考源等。
Familiar with all kinds of basic analog circuit design and analysis, such as amplifier, comparator, reference resource. Experience with ADC design would be a plus.
高精密放大器OP07构成模拟信号放大电路。
Constitute a high-precision analog signal amplifier OP07 amplifier circuit.
同时针对主要来自模拟电路的诸如实际电容的不精确匹配、放大器的有限增益等因素，通过MATLAB模型来详细分析这些模拟电路误差会对于电路性能产生的影响。
The difference between the real circuit and the design model due to the capacity mismatching, finite gain of amplifier and other analog mismatch can be simulated by MATLAB.
运算放大器广泛应用于各种模拟电路、数模混合电路中，而由于各自所用的目标电路不同侧重的指标也有差别。
Operational amplifier is widely used in all kinds of analog and mixed-signal circuit. There are many differences of focused performance because it is applied for differential circuit.
模拟电路部分包括：电池电源供电模块、信号采集电路、模拟滤波和放大电路、增益调节电路、地电压抬升电路和A/D输入信号限制电路。
The analog circuit consists of power-supply modular, signal pickup circuit, analog filter amplifier, gain control circuit, power ground lifting circuit and signal limit circuit of A/D channel.
模拟电路部分包括：电池电源供电模块、信号采集电路、模拟滤波和放大电路、增益调节电路、地电压抬升电路和A/D输入信号限制电路。
The analog circuit consists of power-supply modular, signal pickup circuit, analog filter amplifier, gain control circuit, power ground lifting circuit and signal limit circuit of A/D channel.
应用推荐