在控制系统中，将贝叶斯概率引入到模糊rbf神经网络中，增强了系统的推理能力，提高了飞机各个航道位置的模拟伺服精度。
In the control system, Bayes probability is introduced in the fuzzy RBF neural network and it intensity the inference ability and increase the servo precision.
通过与模拟交流伺服系统的比较，说明了全数字交流伺服系统可编程能力强、系统稳定性好、系统性能提高等特点。
By comparison with analogue AC servo system, some remarkable features of digital AC servo system, such op programming function, system stability and system performance are described.
本文对飞行模拟器运动系统的静压伺服作动器进行了分析，介绍了系统主要元件的结构原理。
This paper analyzes hydrostatic servo actuator in motion system for flight simulator, and introduces structural principle of main component of the system.
在模拟计算机中，一种由伺服系统构成的运算部件。
In analog computer, an arithmetic unit constructed by a servo system.
本系统用电液力矩伺服控制系统来模拟海浪力矩，采用PID算法进行控制，其仿真结果符合要求。
The system uses electro-hydraulic moment servo control system to simulate wave torque and PID algorithm to control. The result of simulation is up to the requirement.
介绍一个建于船模试验拖曳水池中的直推式16摇板电液伺服控制造波机和波浪模拟方法及其计算机控制。
An introduction of a 16 channels electro-hydraulic servo control wave maker constructed in a ship model testing towing tunk. the sea wave simulation method and it's computer control.
介绍一种新型的螺旋桨特性负载模拟装置，它是全数字控制的直流转矩伺服系统，采用转矩电流双闭环控制方式。
A new equipment for simulated the performance of propeller load is introduced in this paper, it's an all digital DC torque servo system using torque closed loop and current closed loop control.
在数字复合正交神经网络的基础上提出一种模拟复合正交神经网络，并用于非线性伺服系统控制中。
An analog compound orthogonal neural network was presented on the basis of the digital compound orthogonal neural network and was applied in the control of the servo system with nonlinearity.
通过不同开关的动作来虚拟模拟常见的故障，诸如，放大器漂移、系统参数改变、伺服阀反冲以及传感器失灵等。
Some faults such as amplifier offset, parameter changes, servo valve backlash and sensor fault are seeded in a virtual way by means of different switches in Simulink.
首先，针对某型精密伺服转台系统中三块电路板（模拟控制板、单片机板和测角控制板）设计了专门的电路板测试仪。
First, a special instrument to test the analog-control board, single-chip board and angle-measure board in the high precision servo turntable system is designed.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
除非必要，否则请选择在用户端角色上使用网路模拟配接器，以避免增加伺服器角色的负荷。
Unless it is necessary, you should pick a client role for the Network Emulation adapter to avoid extra overhead on the server role.
对于一个典型的雷达天线伺服模拟系统，通过实验说明本文方法是有效的。
The effectiveness of this method was verified by a simulation experiment for a typical radar servomechanism.
第四章是伺服模拟卡的电路与逻辑设计。
The forth chapter is the circuitry and logic design of Servo Simulator Board.
介绍一个建于船模试验拖曳水池中的直推式16摇板电液伺服控制造波机和波浪模拟方法及其计算机控制。
An introduction of a 16 channels electro-hydraulic servo control wave maker constructed in a ship model testing towing tunk.
最后章节简要介绍了伺服模拟卡的驱动设计。
At last, introduce the Servo Simulator Board's driver design.
开发了一种集合数字计算机、模拟计算机和电动伺服控制系统，面向自动控制类课程的综合教学实验仪器。
A kind of comprehensive experimental instrument, which is combined by a digital computer, an analog computer and an electric driving servo system, was proposed for automatic control teaching.
设计并制造伺服传动装置，实现了方向舵、襟翼等活动控制构件铰链的机械转动模拟。
Servo-drive instrument was designed and manufactured. It is feasible to simulate the movement of the hinge of movable components such as body flap, rudder, etc.
当伺服器模拟客户端时，透过伺服器使用客户端的认证执行任何的操作。
When the server is impersonates the client, any operations performed by the server use the client's credentials.
将数字伺服系统与模拟加载系统对接，进行了大量的加载实验以验证模拟负载系统的有效性。
For inspecting the validity of simulative load system, I have connected with the servo system and simulative load system and done many experiments on these systems.
对采用电液伺服控制实现加载的力矩负载模拟器进行了深入的分析和研究。
This paper carries out the thorough analysis and research to the momental load simulator by means of electro hydraulic servo control to realize loading.
本文介绍了一种为三轴飞行模拟转台设计的新型液压伺服马达。
In this article, a new hydraulic servomotor designed for three axes flight simulator is introduced.
SDC输出的模拟速度信号VEL还可以作为速度反馈信号以构成火炮伺服系统中的速度回路。
Anolog speed signal VEL from SDC is also taken as speed feedback signal to form speed loop in gun servo system.
由于是一个典型的力伺服系统，而且在仿真实验过程中需要模拟各种载荷的变化情况，电液伺服加载系统是一个相当复杂的机—电—液复合系统。
As a typical servo system for simulating various loads in the experiment, the electro-hydraulic loading system is quite a complex machine-electricity-hydraulic multiple system.
此外，还可以通过液压伺服缸来模拟点火时的高频振动。
Additionally, it also simulates a high frequency vibration of the valve during ignition, by using electro-hydraulic servo actuator.
该文探索了电动伺服负载模拟器的实现问题。
The realization of electrical servo load simulator is explored in this paper.
该试验台架能够模拟船舶的横摇运动和横荡运动，海浪作用于船舶的横摇力矩和横荡力分别由两套电液伺服系统模拟。
The platform can simulate rolling and swaying motion of ships. Two electro-hydraulic servo systems simulate rolling moment and swaying force of wave respectively.
第二章介绍了伺服模拟器的总体设计。
In the second chapters, describes the system design of the ACSS.
第二章介绍了伺服模拟器的总体设计。
In the second chapters, describes the system design of the ACSS.
应用推荐