作为舰艇航行操作仿真训练系统课题的关键组成部分，它提供了一个用软件模拟传统硬件的方法，结果表明是确实可行的。
As a key com-ponent of vessels simulation - training system, it offers a piece of method which using software to imitate classical hardware, and indi-cating to be really feasible.
结合冶金过程的一些特点概述数值模拟仿真的基本原理、区域离散化方法、求解技术及应用实例。
The basic principle of numerical simulation, zone discretization method, solution techniques and some application examples are described in light of the characteristics in metallurgical process.
利用红外数字导引新方法，使用单片微型计算机，对自由路径AGV的导引和运动控制进行了模拟仿真。
A new infrared digital guiding method is used. AGV's motion guiding and controlling simulation in free path are completed by using single chip microcomputer.
仿真试验表明该方法故障定位精确度高、撕裂迅速，有利于大规模模拟电路故障诊断过程自动化的实现。
Simulation confessed: the method has high location precision and fast decomposition rapid, which can be applied to diagnose large-scale analog circuit fault.
同时验证了本文汽车侧面碰撞虚拟试验数值模拟的方法，证明汽车侧面碰撞虚拟试验仿真模型的正确性。
At the same time virtual test validated the article automobile side impact virtual test simulation method, testified the accuracy of automobile side impact virtual test simulation model.
针对冲压机械的特点，采用计算机仿真和物理模拟，为冲压类机械动态特性分析与研究提供了一种实用方法。
According to the features of the punch machine, we research on the dynamic properties and put forward a practical way by means of computer simulation and physical simulation.
复杂适应系统理论和基于多智能体的建模仿真方法，为通信作战指挥模拟的研究提供了新的思路。
Complex adaptive system theory and modeling and emulating method based on multi-agent provide a new way for the study of communication campaign commanding simulation.
试验结果表明，此方法具有精度高，收敛速度快等优点，可广泛运用于发动机数值仿真及控制模拟等领域。
The result implies that this method has high precision and fast convergence pace and it can be applied to many fields such as aeroengine numeral simulation, control simulation and so on.
通过模拟仿真验证了双基斜视CS算法的保相性和基线不稳定补偿方法的有效性。
The simulation results validate the property of phase preserving of bistatic and squinted CS algorithm and the effectiveness of compensated method of baseline instability.
分析了采用输入、输出虚队列的输入缓存式以太网交换机的运行机制，并用计算机仿真的方法对其进行模拟、评价。
The structure and the operation mechanism for the input-buffered Ethernet switch with input and output virtual queues is analyzed. The model is simulated and evaluated by computer simulation.
该文在简要介绍了通信系统信息交换特点的基础上，讨论了在作战模拟系统中对通信系统进行建模与仿真的两种基本方法。
Therefore, this paper briefly introduces the information transmission characteristic in communication system, discusses two modeling and simulation methods in modern WarGame.
这种方法理论依据较强，实现起来简单，且杂波模拟效果非常理想，从而为雷达信号的实时处理和实时仿真提供了一种有效的途径。
The technique may be used for ontime signal processing and simulating in radar due to its multiplicate advantages such as strong theoretical basis, simplicity and excellent simulation effects, etc.
在分析细菌化学趋向性基础上，引入逾渗理论，提出描述细菌在多孔介质中分布的微观仿真模拟方法。
Based on the analysis of the bacterial chemotaxis, the percolation theory was introduced and a micro emulation method was proposed for the bacterial distribution in the porous medium.
最后，利用DSP相关软件，对转子初始位置估算方法进行模拟仿真，验证了高频电压信号注入法理论的正确性。
Finally, the paper simulated to the rotor initial point estimate method using DSP related tool and confirmed the accuracy of high frequency voltage signal method.
本文对模拟退火方法进行了改进，以使其适应于离散事件动态系统(DEDS)仿真优化中优化目标值不可精确估计的特点。
The simulated-annealing optimization method is modified, so that it can be used to DEDS optimization designs by simulation in which the objective function values could not be evaluated accurately.
从模拟仿真及在实际系统GAINS节点中应用的结果可知，该改进方法能很好地改善无线传感器网络通信性能。
The simulation result and application result on the actual WSN system-GAINS indicate that the priority schedule of TinyOS can improve communication performance significantly.
仿真结果表明：所提方法对模拟电路的硬故障与元件参数偏移较小的软故障均适用，故障检测与定位准确率高。
The simulation results show that the proposed method can detect and locate catastrophic and parametric faults of tolerance circuits and has satisfactory diagnosis accuracy.
该方法简洁方便，易于编制程序及模拟仿真，便于工程人员掌握，可用于火箭发射动力学、外弹道学及射表编制等方面研究，具有一定应用价值。
The method is concise and convenient for program, simulation and computation. It can be applied in many study fields, such as rocket launch dynamics, external ballistics, firing table.
采用计算机仿真的方法模拟整个矿井运输系统的运行情况，从而确定系统煤仓容量和系统的有效度。
Mine transportation system's operation statuses was simulated by computer methods, and bunker capacity of the system and its validity were determined based it.
植物的模拟是运用计算机图形学的理论与方法对植物形态结构和生长过程进行仿真的技术，是当前虚拟现实研究的热门课题。
The plant simulation is the technology using of computer graphics theories and methods to simulate the plant structure and growth process, it is a hot topic of virtual reality.
探讨了用电子模拟仿真软件EWB分析、设计电路的一般方法及一些参数的设置。
The paper attempts to introduce the method of circuit analysis and circuit design with electronic simulation software EWB (Electronics Workbench) and setting up for some parameters.
研究了在水声基阵设计中用数值模拟产生海洋环境噪声场的方法及其在水声基阵最佳加权系数和最佳阵增益设计仿真中的应用。
We investigate the method to create the noise field of the underwater by using numerical simulation. The method has been applied to designing the optimal array gain of underwater acoustic array.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
本文将虚拟样机技术与计算机随机模拟方法结合，探讨了通过计算机仿真的方法获得桥式起重机主梁应力幅谱的基本途径。
The paper expounds a way to get stress amplitude spectrum of main girders of overhead traveling crane through computer simulation combining virtual prototype technology and computer random simulation.
异常高压气井生产动态仿真方法不仅改变了传统物理仿真成本高、过程复杂的缺点，而且具备了计算机仿真模拟的准确性。
The method of abnormally high pressure gas well production dynamic simulation not only changes shortcomings of the traditional physics simulation, which have high cost and the complex process, .
探讨了航空机轮刹车系统的模拟仿真技术、半实物仿真技术以及刹车系统的性能评估方法，展望了机轮刹车控制系统的研究方向和发展前景。
The simulation scheme and performance evaluation methods of aircraft braking system are presented, and the trend and good prospect of aircraft braking control system future are pointed out in the end.
以提高无线电引信抗高功率微波干扰的能力为应用背景，采用基于时域有限差分方法（FDTD）的电磁场仿真软件XFDTD6.0，数值模拟高功率微波（HPM）的孔缝耦合特性。
To have radio fuze making better resistance to HPM jamming, the slot coupling characteristics of HPM pulse into cavity are studied by using the software XFDTD6.0 based on the method of FDTD.
利用互功率谱方法对异步电动机发生多根导条断裂故障进行了模拟仿真，包括连续断条和间歇断条故障。
In this paper, the method of cross power spectrum is used to simulate rotor bars breaking faults of induction motor, including continuous breaking and intermittent breaking of rotor bars.
基于刚塑性有限元方法建立了切削加工过程仿真模型，通过模拟获得了切削加工过程中刀具应力的分布和变化情况。
The model of cutting process is established based on the rigid-plastic FEM, and the transient stress distribution of cutting tool in cutting process is obtained through the simulation.
基于刚塑性有限元方法建立了切削加工过程仿真模型，通过模拟获得了切削加工过程中刀具应力的分布和变化情况。
The model of cutting process is established based on the rigid-plastic FEM, and the transient stress distribution of cutting tool in cutting process is obtained through the simulation.
应用推荐