这个仪器记录每一个模型在既定时间段产生的电压。
This recorded the voltage that each model made over a period of time.
我的思路是通过观察每一个模型产生的电压水平来跟踪在同等条件下各个模型所收集的太阳光量。
My idea was to track how much sunlight each model collected under the same conditions by watching how much voltage each model made.
通用汽车的风险投资部门总裁乔恩Lauckner说：提高能源密度的整个概念涉及到车辆的种类奖项时他表示，目前还不清楚多少钱，新技术将保存，但“我只想说，这是非常重要，它不 是一该电压电流模型使用的锂锰尖晶石阴极制成的锂离子电池(“尖晶石"指的是三维的原子排列)。
The current model of the Volt uses lithium-ion batteries made with lithium-manganese spinel cathodes ("spinel" refers to the three-dimensional arrangement of atoms in the material).
相对论模拟模型预测的铅酸电池产生的电压相当精确。
The relativistic simulations predicted the voltages measured in real lead-acid batteries with great precision.
对直流系统开发了计及换相电压不对称的QSS换流器模型。
The QSS converter model in account of unsymmetric commutating voltages is developed for DC system.
电力系统电压暂态稳定在线预测分析的关键是寻找一种算法简单，精度高，预测时间长和鲁棒性好的预测模型。
The key problem of bus voltage predicted analysis on line is to research the predicted model, which includes simple algorithm, high accuracy degree, long predicted time and good robustness.
对于电压控制对象模型，采用极点配置的方法设计PID控制器，均取得了较为满意的控制效果。
For the voltage controlled system model, pole point method is taken to design the PID controller, and good result is achieved.
但是，由于电压测试所使用的故障模型存在局限性，而且测试常常不能全速进行，因此一般来说，电压测试只善于验证电路的功能。
But, because of the weakness of the fault model used and being not able to run at-speed, voltage based testing, generally speaking, is only good at verifying IC's functions.
该文以同步旋转坐标系模型为基础，设计了三相电压型PWM整流器的级联式非线性PI控制器。
This paper proposes a cascaded nonlinear PI controller for three-phase voltage source PWM rectifier, which is based on its model in synchronous reference frame.
利用这一模型，针对含有大型风电场的输电系统，对其静态电压稳定约束条件下的最大输电能力(TTC)展开研究。
Based on the proposed model, total transfer capability (TTC) of power system containing large-scale wind farms is investigated under the constraint condition of static voltage stability.
首先，通过对系统性能以及STATCOM数学模型的分析，对原有数学模型进行了数学推导引入了STATCOM接入点的电压偏差作为控制变量。
At first, through analysis of the system performance and the mathematics matrix of STATCOM, we introduced the voltage of the point where STATCOM jointed in the system as state variable.
偏移电压被直接叠加到信号电压之上，可以被模型化为一个未知的电压源，与已知信号相串联。
The offset voltage adds directly to the signal voltage and can be modeled as an unwanted voltage source in series with the intended signal.
对于电极表面有缺陷的情况，只要选取适当的电极表面轮廓模型，其起始放电电压也是可计算的。
In the case of electrode surface imperfections, the discharge inception voltage can also be calculated provided a suitable electrode surface profile model is chosen.
系统采用具有自适应补偿的电压模型估算定子磁链，PI自适应法估计转速。
The stator flux is estimated by adaptive compensated voltage model, and the speed is estimated with PI adaptive method.
提出了一种基于节点电压非线性优化模型的变电站接地网故障诊断方法。
This paper proposes a fault diagnosis method for grounding grid based on nonlinear nodal voltage optimization model.
为了进行电池控制设计而为电池输出电压建立模型。
Output voltage of proton exchange membrane fuel cell was modeled for control design.
该模型综合考虑长期电压稳定性和控制成本因素，协调不同地理位置和不同种类的控制手段。
This model considered long-term voltage stability and costs of controls synthetically, which could coordinate different kinds of controls distributed over different locations.
基于铁阳极在该技术中应用的广泛性，给出了应用铁阳极时的单元电解电压计算模型。
Based on the common use of iron anode in electro-coagulation flotation, unit electrolysis voltage calculation model of iron anode has been constructed.
首先介绍并分析了固体氧化物燃料电池(SOFC)的工作原理和理论电压模型。
In this paper, the working principle of the solid oxide fuel cell (SOFC) and the theoretic voltage model are introduced and analyzed.
进行系统低频减载方案设计时，简单的频率响应模型由于未考虑系统电压对频率过程的影响而导致不少情况下无法适用。
During the design of under frequency load shedding (UFLS) schemes, some simple models for frequency dynamics analysis are obviously inadequate since they do not take system voltage into account.
但电压模型中的纯积分环节存在直流偏置和初始相位问题。
But the pure integrator of the voltage model has some disadvantages like DC bias and initial phase problems.
目前，在直接转矩控制中大多采用电压模型来估算定子磁链。
At present, the flux estimation based on voltage model is widely used in direct torque control system.
文章首先利用回转器-电容模型对两相电压调整模块进行建模研究，并推导出具体的磁集成自感和互感表达式；
The Gyrator-Capacitor model is first introduced to modeling two-phase integrating magnetics Voltage Regulator Module(VRM), which can deduce the corresponding self-inductance and mutual inductance.
本论文建立了剪式微喷的结构理论模型，分析了在动态电压作用下端部的变形；
The theoretical model of shear mode micro jet is established and the edge displacement under dynamic driving voltage is analyzed .
针对感应电机无速度传感器磁场定向控制系统，提出一种基于电压模型的改进转子磁链观测方法。
An improved rotor flux estimator based on voltage model was proposed for speed sensorless field-oriented vector controlled induction motor drives.
电动汽车直接转矩模糊控制系统中，定子磁链观测器采用电压模型时，系统低速性能变差。
In a direct torque fuzzy control system of electric vehicle, when the voltage model is used as stator flux observer, the system's low speed performance becomes poor.
提出了一种DMOS辐照正空间电荷阈值电压模型。
A threshold voltage model of DMOS by radiation induced positive spatial charge is proposed.
求解泊松方程，由此给出dmos辐照正空间电荷阈值电压模型表示式。
By resolving Poisson equation, the mathematical expression of the threshold voltage model of DMOS by radiation induced positive spatial charge is obtained.
谐波平衡法被用于得到AIA的谐波特性和阻抗模型的端口电压。
The harmonic balance analysis is applied to calculate the frequency spectrum of the AIA and the voltage across the impedance model.
谐波平衡法被用于得到AIA的谐波特性和阻抗模型的端口电压。
The harmonic balance analysis is applied to calculate the frequency spectrum of the AIA and the voltage across the impedance model.
应用推荐