设计了基于线性加权法的模型求解算法。
The solution algorithm based on linear weighting method is proposed in this paper.
利用禁忌搜索技术设计启发式算法对模型求解。
The model was resolved with heuristic algorithm based on Tabu search technique.
建立碰撞模型求解碰撞速度是交通事故再现的关键步骤。
A key step of accident reconstruction is to establish impact models for calculating the impact velocity of vehicles.
非线性规划模型求解中采用MFM算法，降低了计算量。
The Modified Feasible Method(MFM) is adopted to reduce computational complexity of the nonlinear programming model.
通过模型求解，得出1985年能耗、利税优化生产方案。
After solving the model, the optimal production plans about energy and profits tax in 1985 are obtained.
进一步阐述了用非局部理论模型求解断裂力学问题的正确性。
The result shows again the correctness of the nonlocal model for solving problems in fracture mechanics.
介绍了以“压力—流量平衡法”为基础的模型求解方法和步骤。
The method and procedure of the model resolution is introduced based on " pressure-flow balance".
采用线弹簧模型求解多个共面任意分布表面裂纹的应力强度因子。
The stress intensity factors of multitudinous arbitrarily distributed coplanar surface cracks are solved by using the line - spring model.
应用数值分析方法对这一模型求解，得到与实验相符的杂质原子扩散分布；
Zn diffusion profiles calculated from this model with numerical method were in good agreement with the results of experiment.
对空气隙膜蒸馏建立数学计算模型，并首次采用蒙特卡洛法对膜蒸馏数学模型求解。
A mathematics calculation model of air gap membrane distillation is established and calculated with Monte Carlo for the first time.
有环贝叶斯网络的研究，为管理软件项目迭代过程风险提供了建模方法和模型求解算法。
Cyclic Bayesian network provides modeling method and inference algorithms for the management of software project iterative process risk.
用法福尔质量加权平均N-S方程及两方程湍流模型求解三维超声速平板湍流边界层流动；
The mass-weight averaging N-S equations are adopted as the governing equations of flow, and a two-equation turbulent model is employed.
通过优化模型求解直接获得地质储量及水侵量的大小，同时还可以确定水域大小和水侵系数。
According to solution of optimal model, geologic reserves and water influx value can be obtained directly, and water range and water invasion coefficient can also be determined.
通过优化模型求解直接获得地质储量及水侵量的大小，同时还可以确定水体大小和水侵系数。
Optimized model is used to calculate directly OOIP and water influx, and determine water body size and water influx coefficient.
论文详细介绍了介电测量技术的原理及影响因素，并用集总电路模型求解被测绝缘纸板的复介电常数。
The dissertation presents the principle of dielectrometry and its disturbance factors, and the methods to obtain the complex permittivity with a lumped circuit model.
对模型求解中涉及到的并联输水管管径的选定和流量分配问题作了探讨，推导了连接管设置间距计算式。
It also discussed the diameter selection and flow distribution of the parallel conduits concerned in solving the model, and derived a formula for the distance between link pipes.
对模型求解，并进行结果分析和经济效益计算，以此来提供决策支持，指导生产和销售，提高经济效益。
As the model works out, analyzing the results and calculating economic benefits, would be helpful to decision-making support, guiding production and sales, raising economic benefits.
模型采用有限体积法对方程进行离散，采用与动量插值技术相结合的SIMPLEC算法进行模型求解。
The governing equations for flow-sediment transport are solved with the finite volume method and the SIMPLEC algorithm with the momentum interpolation.
为了改进主动轮廓线模型求解过程中轮廓线初始位置的敏感性，通常要采用一些方法扩大图像力的作用域。
To improve the active contour model's sensitivity to its initial position, some methods must be applied to widen the image force scope.
文中首先通过数值实例验证了这一模型的精确性，进而利用这一模型求解了均匀土层场地的地震反应问题。
The accuracy of the model is verified by numerical examples, and then the field seismic response of homogeneous soil layers is analyzed.
运用实证研究成果，建立我国上市公司资本结构的综合评价模型，并运用该模型求解出最优资本结构区间。
Then it draws seven important conclusions and sets up a comprehensive evaluation model for capital structure and finds out optimal capital structure zone.
针对双线性模型与实际系统之间的差异，提出一种基于双线性模型求解非线性动态系统最优控制的迭代算法。
This paper presents an iterative algorithm of optimal control for discrete time nonlinear systems, according to the differences of the real system and its bilinear model.
最大膛压点的确定是内弹道零维模型求解的一个重要环节，传统的优选方法存在着可能陷入局部极值点的问题。
Determination of the bore maxi-pressure point is an important link in solution of internal ballistics zero dimension model. Traditional optimizing methods probably have some problems of local pole.
结合大射电望远镜中索网主动反射面实例给出了一种基于最小二乘优化模型求解索网结构初始平衡状态的方法。
An approach, together with a demonstration on the active cable-mesh reflector, using the least square optimization model is presented to solve the initial equilibrium problem of cable-mesh.
实例计算表明，即使测试过程中存在着较大的噪音，用该自动拟合模型求解的地层参数都接近实际的地层参数。
Illustration shows that though there is much noise in the test process, formation parameters calculated with this model are approximate to real ones.
建立了水电站厂内自动发电控制的数学模型，提出一种针对多喷嘴水斗式水轮机组的自动发电控制模型求解方法。
A mathematical model of automatic generation control for hydroelectric station is established, and a solution method to AGC mathematical model on multi-nozzle scoop-type turbines is proposed.
再次由德尔菲法和二次比选模型对模型求解结果分别进行初次和二次评估修正，从而得到进一步优化的配送网络；
Thirdly, the aticle evaluates and revises the results calculated from the foregoing madel with Delphi method and secondary comparative model, thus gets ulteriorly optimized distribution network.
由于生物化学工程基于机理十分复杂的生物体系，因而在理论建模、模型求解和优化上必然导致对数学的要求较高。
Because biochemical engineering is based on the biosystem, which has a very complex mechanism, it brings about relative high requirements on modeling, solving and optimizing models theoretically.
由于生物化学工程基于机理十分复杂的生物体系，因而在理论建模、模型求解和优化上必然导致对数学的要求较高。
Because biochemical engineering is based on the biosystem, which has a very complex mechanism, it brings about relative high requirements on modeling, solving and optimizing models theoretically.
应用推荐