将树脂灌入模型，从而使得纤维相互粘合在一起。
Resin is then injected into the molds to bond the fibres together.
目的探讨HB-H-6树脂血浆灌流治疗黄疸犬动物模型的有效性和安全性。
Objective To explore the efficacy and safety of HB - H - 6 resin plasma perfusion for the treatment of jaundice dog animal model.
我们提供了树脂模型teradite，和树脂的主模型。
We offers the resin for models of TERADITE, and the resin for master models.
为了确定快速成型中树脂固化线条的理论模型，对扫描动作和固化过程进行了详细分析。
To determine the theoretical model of curing resin line in rapid prototyping, the scanning motion and curing process are particularly analyzed.
对橡胶增韧环氧树脂的增韧机理模型进行了回顾。
The model of toughening mechanisms of rubber toughened epoxy resins was reviewed.
研究了非缓冲体系中性氨基酸在732型强酸性阳离子交换树脂上的离子交换平衡，并提出了平衡模型。
Ion exchange equilibrium of neutral amino acids on 732 strong acid cation exchange resin in non buffer systems were studied and an equilibrium model was proposed.
我们胶水罐，在模型和完成与24小时环氧树脂。
We glue the tank in the model and finish it with 24 hour epoxy.
使用包含一个橡胶和空穴的轴对称模型的有限元计算来分析橡胶增韧环氧树脂细观上的力学行为。
The finite element method was employed to study the micromechanics in rubber toughened epoxy resins using the axisymmetric model contained a rubber and a hole.
对橡胶增韧环氧树脂的增韧机理模型进行了回顾。
The model of toughening mechanisms of rubber-toughened epoxy resins was reviewed.
利用环氧树脂模型进行光弹性冻结试验，模拟受填土压力作用时的土坝坝下圆型涵管的受力状态。
The stress state of the circular culvert pipe under soil pressure at rest is analysed with the photoelastic simulated test of the epoxy resin model frozn.
结果：得到了全冠的三维重建数字模型，成功制作出树脂全冠。
RESULTS: the digital model was established and the resin crown was successfully made.
目的评价在根管治疗术的临床前操作训练中树脂透明牙模型的作用和效果。
Objective to evaluate the validity of simulated resin transparent tooth models used in the pre-clinical practice training of root canal therapy.
在假定该材料宏观上是均匀与连续的条件下，选取了织物的一个完全组织及所包含的树脂作为一个代表性体元来建立分析模型。
Assuming that the composites are homogeneous and continuous on macrostructure, a representative volume element (RVU) including a stitch repeat and resin was taken to setup analysis model.
得灯盏细辛组、模型组和空白对照组的血管截面积比值、血管密度值等数据以及颊囊微血管树脂铸形标本，作观察对比。
Vessel areas rate, vessel density and resin vascular cast of HEr group, model group and blank group are got. Results are compared.
采用DSC方法研究rtm专用双马来酰亚胺树脂的固化动力学模型与固化动力学参数。
The cure kinetic model and kinetic parameters of BMI resin for RTM are studied by DSC.
采用全动态dsc研究了双马来酰亚胺树脂(BMI)体系的固化反应动力学，建立了固化动力学的唯象模型。
The cure kinetics of bismaleimides (BMI) resin system was investigated by dynamic DSC analysis and the phenomenological model was established.
模型材料为环氧树脂平板。
模型材料由光学玻璃纤维增强环氧树脂制成。
Birefringent composite models are fabricated using epoxy resin reinforced with unidirectionally oriented of optic glass fibers.
本文定量地研究了树脂溶胀率和介质浓度的相关关系，建立数学模型，同时论述了结论在实际过程中的应用。
The relation between the swelling rate and the medium concentration, sets up mathematical models and expounds the application of conclusion to the practical process.
用全动态dsc研究了先进复合材料用高性能双组份环氧树脂的固化反应动力学，获得了固化反应的动力学参数，并建立了固化动力学的唯象模型。
The cure kinetics of a bicomponent high performance epoxy resin was studied by dynamic DSC analysis, and the parameters of the cure reaction were obtained to establish a phenomenological model.
当我从高中学校毕业了，有超过二百个箱子模型包括塑料、树脂成套工具，和树脂转换成套工具。
When I graduated from the senior high school, there were more than two hundred boxes of model including plastic, resin kits, and resin conversion kits.
特种模型材料由环氧树脂、增韧剂、固化剂和金属粉构成。
The special model material is composed of epoxy resins, plasticizer, solidified agent and metal power.
建立树脂体系的流变模型可以预测体系rtm工艺窗口。
Chemorheology model can be used to predict the processing window of RTM.
在动力学研究中，建立了西索米星在D113（皖）树脂上的吸附表面有效扩散模型，利用正交配置法求解动力学模型。
The surface diffusion model were established to simulate the adsorption process of sisomicin on the exchange resin D113. The model was solved by orthogonal collocation method.
本人携带样品的光学模具制造模型，树脂类型，及演员。
I carry the sample of the manufactured optical molding model, resin type, and cast.
试验结果表明，该环氧树脂体系的固化动力学符合自催化固化反应模型。
From the experimental data, it was found that the autocatalytic cure kinetic modeling correctly represented the cure kinetics of this system.
提示：有多个逸出孔，有利于成品中树脂耗材的排除，同时，也有利于后期处理过程中使用清洁溶剂清理你的模型。
Tip: having multiple holes makes it easier for the resin to escape, and for the cleaning solvent to clean out your model during post-processing.
使用该模型可以对聚合工艺进行设计、模拟和优化，并将有助于聚苯乙烯树脂分子设计的探索。
This model would be used in the design, simulation and optimization of the styrene polymerization process.
建立了XDA - 1树脂柱吸附茶多酚过程的传质模型，并根据该模型分别计算了不同操作条件下相应的物质总传质系数及传质区长度。
Adsorption model for TP mass transfer with XDA-1 resins was set up and the height of mass transfer zone and total mass transfer coefficient in different operation conditions were calculated.
利用塔罗油作为新闻纸厂浆水体系中树脂的模型物，分别在有纤维和无纤维存在下研究了钙皂对树脂沉积的影响。
Tall oil was used as a model compound of the pitch in the pulp suspension to study the effects of calcium soaps on the pitch deposition with and without fibers.
应用推荐