并为各模块电路设计了稳定的供电电源。
At last, stable power supply is designed for each module circuit.
这将导致进一步降低成本和空间上的压力传感模块电路板。
This will lead to further reduction of cost and space on the PCB of the pressure-sensing module.
专利模块电路设计，智能故障自动检测，应急转换时间快。
Patent circuit design with Intelligent automatic breakdown detection and quick emergency switch times.
针对开关变换器的主要功能模块电路进行了设计和工作原理分析。
The circuit design and operating principle of its main functional modules are analyzed.
本文分析了电流传送器的基本镜像电流源和电压跟随器模块电路。
The paper analyzes the fundamental part circuit of current conveyor, the current mirror and the voltage follower.
在此基础上对各模块电路进行了详细的理论分析与具体电路设计实现。
On this basis, it describes the circuit of the detailed theoretical analysis and the design of the modules.
本课题是对无工频变压器开关电源控制器芯片模块电路的设计与研究。
My project is focused on the design and research of PWM switching power supply control circuitry that requires high efficiency and reliability.
最后，对各个模块电路以及完整无源射频标签电路进行了测试和分析。
In the end, measurements and results analysis on some modules and RFID transponder are introduced.
基本驱动模块电路输出波形的测试结果表明，这种设计方法是完全可行的。
The output waveform of the module is the same figure as the simulation waveform. This result indicates that the design method is feasible.
重点阐述了调光控制系统总设计框架、各个硬件模块电路和相应的软件流程。
The framework of whole dimmer control system, the realization of hardware circuit and software flow were expounded emphatically.
第二部分介绍了系统硬件设计，包括主站射频模块和测站射频模块电路的设计。
The second part of the paper introduces the hardware design of the system, including the circuit design of host station RF module and measurement station RF module.
硬件设计部分主要有整流、斩波和逆变各个功能模块电路、驱动电路的设计以及参数选择等。
Hardware design mainly covers inverting, commuting, buck and every function module electrocircuit inverting and electrocircuit driving and so on.
论述WB型直流电压变送器的工作原理、完成转换的各个模块电路的作用及变送器总电路的特点。
The work principle of the WB-type DC voltage transmitter, the functions of each conversion module and the characteristic of the whole circuit of the transmitter are elaborated in this paper.
重点叙述了控制器的硬件系统构成，包括信号调理电路、脱扣控制电路和GPRS通信模块电路。
Focus on the controller hardware system structure, Including signal regulate circuit, tripping control circuit and GPRS communication module circuit.
其次依照方案中组成单元的划分，详细论述了母板，功能选择与控制电路，模块电路的开发及设计。
Secondly, in accordance with the scheme, the thesis discusses the development and design of the motherboard, function choice and control circuits and module circuits.
设计中将上述功能电路制成模块电路板，同时增加一应急电源和应急气道，大大提高车门的安全性与应急性。
In the design, the functional circuits are made into module circuit, and the emergency power and airway can also be increased to improve the safety and emergency of car greatly.
系统在硬件结构上分为控制、驱动、电源、显示、电压转换五大模块电路，各电路板之间采用磁耦进行隔离。
The system hardware architecture is divided into control, drive, power supply, display five blocks circuits, and magnetic coupling is used to isolate circuit boards.
本文介绍了利用AT 89 C51单片机组成的一个简单测压显示模块电路，并详细介绍了其接口和应用。
In this paper, we introduce a simple circuit module for voltage measuring and displaying, which main consists of MCU AT89C51, and discuss its interface and application in detail.
针对无线传感器网络节点的各个模块能耗情况，从硬件方面比较分析各种芯片，给出了各个模块电路的设计方案。
Aim for WSN node energy consumption of each module, from the comparative analysis of hardware about all kinds of chips, each module is given circuit design.
介绍了一种多用途水声信号预处理机的具体设计，详细阐述了各模块电路的设计原理及工程实现，给出了部分电路的原理图。
A design of a multi-purpose hydro-acoustic signal preprocessor is introduced. A detail expatiation of the design principle and engineering realization of the modular circuits are given.
论文阐述了整个传输系统的硬件平台设计思想及实现方法，分别对处理器的外围电路及视、音频压缩编码模块电路进行了分析。
The paper explains the designing philosophy, the implementation method of systematic hardware platform, the peripheral circuit of the processor and the circuit of AV compressing module.
最后在考虑实际因素的基础上，依次设计了时钟产生电路、前置滤波器、带隙基准源、开关电容积分器、锁存比较器和DAC等子模块电路并做了仿真。
The factors which will be encountered are descried and modules include anti-aliasing filter, clock circuit, band gap voltage reference, sc integrator, latched comparator and DAC are designed.
介绍一种技术性能比较先进的交通信号控制机，这种信号机不仅能够自动地进行多时段控制，还可以接入网络实现在线控制；电路设计采用模块式的电路结构，可根据用户的功能需要增减模块电路。
This paper introduces an advanced traffic signal controller, which can not only implement multi-time block control, but also can be connected with network in order to realize on-line control.
雷声公司称正在演示使用氮化镓微波集成电路放大器的发射-接收模块。
Raytheon says it is demonstrating that transmit-receive modules using GaN-powered monolithic microwave integrated circuit amplifiers (MMICs).
RichardKitney教授说：“‘逻辑门’是硅电路的基础建筑模块，我们整个数字时代都是以它为根基的。”
Professor Richard Kitney said: 'Logic gates are the fundamental building blocks in silicon circuitry that our entire digital age is based on.
这种硅晶光学集成电路能够代替计算机关键模块之间，比如处理器和内存之间，的电子连接器。
The silicon photonic chips could replace the electronic connections between a computer's key components, such as its processors and memory.
并实现了这个模块的硬件电路的设计和驱动程序的开发。
And we have designed the driver and the hardware circuit of this modular.
论文对系统硬件性能要求以及软件功能进行了分析。进而，设计了系统的硬件电路和软件功能模块。
In the thesis it analyses the hardware performance requirements and the software functions of the system and designs the hardware circuits and the software function modules after analysis.
系统VCO模块采用微分电路设计技术，可将电源噪音对时钟信号输出抖动的影响降至最低。
The VCO module makes use of differential coefficient circuit design technology to lower the effect of power resource on the clock signal input shake.
系统VCO模块采用微分电路设计技术，可将电源噪音对时钟信号输出抖动的影响降至最低。
The VCO module makes use of differential coefficient circuit design technology to lower the effect of power resource on the clock signal input shake.
应用推荐