任何在模具试模及接受过程中发现的错误应由供应商更正，任何相关费用与模具性能。
Any errors found in the dies during tryout and final acceptance test will be corrected by the die supplier at no additional cost to Su-dan.
介绍了医用一次性塑料镊子的成型工艺及注射模结构，模具试模一次成功，成型塑件满足用户要。
The forming process for the medical one_off plastic tweezers and the structure of the injection mould were introduced.
其中由正交法设计得到实验样本，由软试模提取模具的SDV值，将其作为优化目标。
It takes design experiment samples by orthogonal plan method and regards the SDV values which come from soft trying die as goal of optimizing.
负责新模具，新原料试模，验证并记录相关文件表单。
In charge of new mold and new material test. Making optimization and record on documents.
为了能够快速响应多变的市场需求，在模具设计与制造过程中运用虚拟原型技术可以有效地降低模具制造和试模的成本，缩短制造周期。
To answer the requirement of changeable market during mould design making process the virtual prototyping technology can be cut down the cost of mould making test mould and shorten making period.
适用范围：注塑部量产中的模具，不含试模模具。
Application arrange: the mold for the mass production, not for the trial mold.
通过对嵌入式消毒柜门内衬板的工艺分析，确定其模具加工方案，同时对试模过程中存在的问题作进一步的剖析。
Through analysis to technology of embedded inner door scaleboard of disinfectant box, the die processes are determined and some questions are further analyzed in test.
在试模过程中，成型的塑件有多种失效形式，而每种失效形式都和模具设计不合理有关。
There are many failure modes of plastic parts during trial molding process. Every failure mode is in relation to improper designs.
以某型铝合金车轮的模具设计为例，证明了该模拟方法能够指导模具结构优化，减少反复修模、试模所造成的能源浪费，提高工艺成品率。
This simulation method can conduct die structure optimization, and reduce repeat die repair and waste of die trial energy, and improve rate of finished product.
我们充分利用CAE模流分析技术，模拟和优化模具浇道系统设计，提高零件的质量和减少试模次数及不必要的浪费。
We make full use of CAE mold flow analysis techniques, simulation and optimization of mold runner system design, improve part quality and reduce the number of test mode and unnecessary waste.
叙述了外壳注射模在试模中出现的问题，分析了问题产生的原因并改进了模具结构。
The questions of testing outer covering injection mold are stated, analysis on the reason and the mold structure is improved.
对双层共12个不同方向同步抽芯脱模典型结构以及模具制造和试模时应注意的问题作了叙述。
The structure of 12 of the double core-pulling in different directions, the points which should pay attention to when making and trying were described.
确定合理机加工工艺，可大大提高模具加工精度，减少试模次数。
We use reasonable machining technology to greatly improve the machining precision of the rolling dies, and deuce The Times of trying dies.
公司提供从产品设计、模具设计、模具制造、试模、模具验收、送货、二次加工一条龙服务。
Companies from product design, mold design, mold manufacturing, test die, die acceptance, delivery, secondary processing through-train service.
通过有限元法分析可减少试模次数，从而降低消耗，缩短模具设计时间。
With FEM simulation, the cost and tooling design time can be reduced significantly by minimizing the number of try outs.
模温机先预调达到注塑模具所需的温度，一次成型为优质产品，减少试模原料。
First preset mold temperature machine to the temperature required for injection mold, molding for the high-quality products once and reducing the tryout material.
模温机先预调达到注塑模具所需的温度，一次成型为优质产品，减少试模原料。
First preset mold temperature machine to the temperature required for injection mold, molding for the high-quality products once and reducing the tryout material.
应用推荐