布料系统采用独特的强制式破拱装置，适应不同产品的模具模腔布料，布料均匀无死角。
The Feeding system use a unique forced arch-breaking device, suitable for different mould cavity products fabric, evenly without dead ends.
本文采用自行研制的测试装置，在国内首次测得注塑模具模腔平均压力的数据，并能达到动态显示、自动记录。
Test unit made by oneself was adopted, the data of injection mould cavity average pressure were first got from checkout in home. In addition, they can be dynamically shown and automatically recorded.
持续几十年的挑战之一是难于找到多型腔模具来生产一模一样的部件。
One that has persisted for years is the difficulty of getting multicavity tools to produce identical parts.
持续几十年的挑战之一是难于找到多型腔模具来生产一模一样的部件。
One that has persisted for years (decades, actually) is the difficulty of getting multicavity tools to produce identical parts.
根据铝合金进气接管外形尺寸与结构等特点，该模具宜设计成一模一腔。
The die with one mould and one cavity was designed based on the geometry size and structure of the components.
本文介绍了电源插座压制成形模具的设计与制造方法，该压制模采用一模一腔的结构。
Design of compression mold and manufacture methods of power supply plug-in socket are introduced separately. This mold adopts the structure including one cavity per mold.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
摘要：通过对塑料洗衣机把手工艺的分析，设计了一副一模两腔的注塑模具。
Abstract: Designed a one-mode two-cavity injection mold through the analysis of the handle of washing machine.
通过实验的方法测量出不同模具的喷嘴压力曲线，证实模腔几何形状与喷嘴压力之间存在确定的关系。
Experiment methodology that measures the nozzle pressure of different molds has been proposed which proved that there existed the internal relationship between nozzle pressure and shape of cavity.
介绍了塑胶模具复杂型腔采用CNCEDM的拷贝法和展成法加工技术，使镶拼式模腔改为整体式模腔；
Duplication and generation technologies with CNCEDM in machining complicated cavity of plastics dies, resulting in integral cavity instead of mosaic one, are stated.
通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析，选择聚丙烯的成型工艺参数，设计了一模一腔的注射模具。
An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.
采用加权曲面参数方程拟合型腔侧壁曲面的算法，实现了子午线轮胎活络模模具型腔曲面的构造。
Apply the weighted surface parameter equation to fit the algorithm of cavity lateral surface, and realize the cavity surface construction of radial parting mold of meridian tire.
的翻译是：在结构设计的波纹管密封圈联合和它的多个模腔模具设计中引入了这一份文件。
The Structure designing of bellow seal joint and it′s multiple cavity mold designing are introduced in this paper.
注射模的浇注系统是指从注塑机喷嘴开始到型腔为止的塑料流动通道，它是模具的一部分，一般分为普通流道浇注系统和无流道浇注系统两大类。
The runner system in the injection mold serves to convey the plastic melt coming from the nozzle of the injection molding machine to the cavity.
介绍了节流阀在非平衡型腔注射模中的应用及模具工作过程，并分析了节流阀的设计要点。
The application and working process of throttle valve in injection mold of unbalanced cavities were introduced, and the key points of designing throttle valve was analysed.
将一个标准四模腔大水口模具与一个四模腔倒转大水口模具结合成为一套可于同一大小的注塑机，生产量可增加一倍的层板模具，并且可降低成本。
Combine a traditional 4 cavity edge gate and a 4 cavities reverse gate mould which help to double the moulding capacity and reduce production cost.
是一副比拟典型的塑料模具，它不只包罗有镶拼的型腔、侧向抽芯构造、动定模都有成型的型芯，还有延时抽芯机构。
Is a typical plastic mold, which not only include Xiangpin the cavity, lateral core pulling structure, the dynamic model has forming the core, delay core pulling bodies.
介绍了线圈架注射模的设计，模具采用一模两腔结构。
It mainly introduces the designing of winding rak injection mould.
针对精铸空心涡轮叶片的精确控形问题，开展模具型腔优化设计中的虚拟修模技术研究。
This article presents a study of the technology of virtual mold-repair for the optimal design of the mold cavity of a hollow turbine blade to precisely control its shape.
锁模力是注塑机一个非常重要的参数，它是注塑机在注射过程中保持模具闭合状态以抵御型腔压力所提供的最大压力。
Clamping force is an important attribute of the clamping unit of a PIMM. It is the maximum force the machine is capable of to keep the mould closed against the cavity pressure during injection.
冷挤压组合凹模的失效主要是凹模内腔疲劳裂纹的出现，在模具设计的前期较为准确的估算出组合凹模的疲劳寿命是模具优化设计的前提。
The stress analysis of combined die is a very complicated problem, and the exact analysis on it is a key to solve the mould life.
气辅注塑家具的加工方法是：①塑料注射，熔 融的塑料注入模具型腔，熔融热塑料遇到温度较低的模壁在周围形成薄 壁凝固层；
The production process of the inflation aided injection molded furniture includes the following steps: 1. injecting molten plastic into mold cavity to form thin wall solidified layer at the mold wall;
介绍了一种无飞边、多腔、圆截面橡胶密封圈压模的设计方法及制造技术，采用这种方法设计制造的模具结构简单、可靠，生产的产品质量良好。
The design technique and manufacture technology for a kind of multi-cavity, no-burr and round-section rubber sealing ring with multi-cavity and no-burr were introduced.
介绍了一种无飞边、多腔、圆截面橡胶密封圈压模的设计方法及制造技术，采用这种方法设计制造的模具结构简单、可靠，生产的产品质量良好。
The design technique and manufacture technology for a kind of multi-cavity, no-burr and round-section rubber sealing ring with multi-cavity and no-burr were introduced.
应用推荐