作为一个质量检验工程师的其中一个重要的职能就是减少一个产品的质量成本。
One of the key functions of a quality Engineer is the reduction of the total cost of quality associated with a product.
例如，一个测试工程师可以在对各个政策测试进行前单独检验sr1。
For example, a test engineer could verify SR1 individually, before the test for the individual policies are executed.
正如King指出的，Ceylon是一个社区项目，需要软件工程师和测试人员帮助设计、构建和检验这种语言和SDK。
As King has said, Ceylon is a community effort and therefore needs software engineers and testers to help design, build, and validate the language and SDK.
我们其中的一个软件工程师OrionHodson，完全重新动手写了一个全新的FAT32文件系统，该系统使用了Sing#中的所有状态检验的特性。
One of our engineers, Orion Hodson, had written a new FAT32 file system from scratch using all of the static verification features in Sing#.
工程师检验了那台传真机。
核质量保证工程师(NQAE)负责有效执行预定阶段所需的检验工作。
Effective implementation of the required inspection activity at the predetermined stages is the responsibility of the NQAE.
在投入使用之前，工程师们检验了所有的机械。
The engineers checked out all the machines before they were put to use.
根据质量工程师制定的产品检验指导书对成品产品进行检验。
Finish product inspecting following product inspection work instructor by quality engineer.
检验试验计划（ITP）提交给合同工程师，由其对客户进行核准，并作出标记。
The ITP will be submitted for approval and 'mark up' to the client by the contract engineer.
检验员：产品管理中任命的一个工程师。他的职责是检验产品的质量，精度和整个工程作业。
Checker: a job Checker is an appointed Application engineer within Product Management. This Application engineer will check the quality, accuracy, and thoroughness of your work on an engineering job.
协助模具工程师对“首件检验报告”的处理；
Support tooling engineers in disposing First Article inspection reports;
在检验过程中能鉴别可疑产品和不合格产品，并对可疑批次进行标识锁定，及时报告产品质量工程师和生产线主管。
Can identify suspect parts and nonconformity parts during inspection and make a mark for whole lot. Should block suspect lots and report to TQ engineer and supervisor.
将检验数据进行汇总和分析，并反馈信息给组件车间工程师。
Analyzes the inspection data and does statistics, feedback the information to Panel FAB engineer.
在这里，艾默生的研究和生产设计工程师将研究阀门技术，检验阀门性能。
Here, Emerson research and product design engineers will investigate valve technologies and verify valve-performance capabilities.
10年以上机械检验或机械工程师经验，熟悉压力容器和动设备，有设备维护的经历，有LNG项目经历者优先。
At least 10 years experience in mechanical inspection or test, familiar with pressure vessel and equipment, and have experience of equipment maintenance. Experienced in LNG project is preferred.
工程师有权对按合同规定供应的材料和工程设备在其制造、装配或准备过程中进行检查和检验。
The Engineer shall be entitled, during manufacture, fabrication or preparation to inspect and test the materials and Plant to be supplied under the Contract.
公司拥有资深管理人员、专业设计师、生产工程师、技术检验人员以及售后安装人员。
The company has a senior management staff, professional designers, production engineers, as well as technical inspection after the installation of officers.
开箱检验必须在业主代表、监理工程师、承包商代表下进行。
Unpacking and inspection shall be done under the representative of owner, the supervising engineer and the representative of the contractor.
收到客户意见后，将检验试验计划（ITP）退还给核质量保证工程师（NQAE）评审； 收到意见后，进行修订，直到完成客户核准。
Should comments be received from the client, the ITP will be returned to the NQAE for review and after acceptance of the comments, revision until client approval is obtained.
该容器已经通过国家锅炉及压力容器检验协会的检验，符合美国机械工程师协会CSD-1的要求，满足美国机械工程师协会标准。
The vessel is registered with the National Board of Boiler and Pressure Vessel Inspectors, meets requirements of CSD-1 of the ASME Code, and is built to Section IV of the ASME code.
若工程师要求对此永久设备、材料或工艺再度进行检验，则检验应按相同条款和条件重新进行。
If the Engineer requires this Plant, Materials or workmanship to be retested, the tests shall be repeated under the same terms and conditions.
承包商应与工程师商定对任何永久设备、材料和工程其他部分进行规定检验的时间和地点。
The Contractor shall agree, with the Engineer, the time and place for the specified testing of any Plant, Materials and other parts of the Works.
品质检验及技术支持工程师2-3人1。五年以上金属加工产品的品质保障和控制的从业经验。
QC and Technical support engineer. 2-3 persons. Qualification: 1. Minimun 5 years experience in FASTENERS industry or metallic process production for quality guarantee and control.
在检验过程中能鉴别可疑产品和不合格产品，并对可疑批次进行标识锁定，及时报告产品质量工程师和生产线主管。
Can identify suspect parts and nonconformity parts during inspection, and make a mark for whole lot. Should block suspect lots and report to TQ en.
在检验过程中能鉴别可疑产品和不合格产品，并对可疑批次进行标识锁定，及时报告产品质量工程师和生产线主管。
Can identify suspect parts and nonconformity parts during inspection, and make a mark for whole lot. Should block suspect lots and report to TQ en.
应用推荐