检测速度快且不会出现漏检现象，检测工的劳动强度得以有效降低。
The detection mechanism has the advantages of high detection speed and no detection omission phenomenon, and effectively reduces the labor intensity of detection workers.
做兼职，打零工的情况会掩盖全职就业的不足，这是用传统的失业计量方法无法检测的。
The availability of part-time work may disguise an underlying lack of full-time jobs, which goes undetected with unemployment measures.
基于中国北方某湿陷性黄土路基工程，利用动力触探和面波法等方法对冲击压实工后的黄土路基进行对比检测。
Based on the collapsible loess subgrade in China northern region, this paper used dynamic sounding method and surface wave method to detect the impact compaction behavior.
导弹地面测发控系统可以对导弹进行发射控制、时序检测和火工品通路阻值测量，其整体构成采用分布式结构。
A low cost missile ground test and control system adopts distributed structure, which can carry out launch control, time sequence detection and pyrotechnics channel resistance measurement.
分析了NDP在电火工品无损检测中电桥自动调平衡的方法、参数计算及硬件电路和软件流程图。
Analyzes the method of auto balance, parameter calculation, hardware circuit and software flow chart of electric bridge of NDP in the non -destructive testing of EED.
首先介绍了火电厂热工锅炉汽包水位控制系统以及现阶段普遍采取的报警和故障检测方法。
At first, boiler water level control system and the mean of alarm and fault detection adopted universally are introduced.
介绍一种用便携式柴油机热工检测仪对船用柴油机进行负荷调整、故障诊断以及状态监测的新方法。
This paper introduces the new method by which portable heat detector for diesel engine is used to adjust loading, diagnose faults and monitor condition.
介绍了风机盘管热工性能检测的方法，建立了相关数学模型，分析了检测过程中的不确定度来源。
Presents the method of thermal performance testing of fan coil, establishes the relative mathematical model and analyses sources of uncertainty in performance testing process.
对汽液两相的流动工况也可以用边缘检测小波变换去进行分析，并实现对汽液两相流动的热工数值检测。
It is also possible to analyze a gas liquid two phase flow condition through an edge detection of wavelet transformation and detect thermodynamic data in a gas liquid two phase flow.
为保证壁挂锅炉的质量，检测其安全装置和热工性能是否达到要求，需要根据不同地区的气源进行配气。
In various regions, different test gases are usually necessary to insure the quality, safety device and thermal characteristics of wall hung gas boiler.
同时将这一理论应用到长白落叶松入工林木材图象的处理中。测出了木材的胞壁率，对细胞分子的边缘进行检测。
At same time, this theory was applied in wood anatomical structure image processing, to measure wood cell space ratio and check cell molecular boundary.
本文着重介绍了该示范工程所采取的具体节能技术措施及热工性能检测结果。
The article introduced emphatically the technical measures of energy saving adopted and test results of thermal performance for the demonstrative engineering.
因此，认为有实现电火工品单发发火性能预报的可能性，并对发火性能预报的两种无损检测方法进行了讨论。
For this reason, to prophesy of the firing character for one EED individually is possibility, and two methods that prophesy of the firing charater of EED are discussed.
为了使基于PCA的传感器故障检测和重构方法适用于非线性较严重的热工过程，对该方法进行了有效的改进。
An improved PCA arithmetic model is applicable to nonlinear plant thermal processes using local PCA model for various power loads based on the historical data.
本文从应用的角度出发，介绍了国产AI—808人工智能调节器的性能、参数设置以及在液位检测自动控制系统中的应用。
This article describes the performance, parameter setting of AI - 808 manmade and intelligent regulator, and its application into the automatic level control system.
其工后检测方法宜以重型圆锥动力触探试验、旁压试验为主，进行综合检测和评价。
Using heavy cone dynamic penetration test and pressurement test is appropriate as measurement after filling, and using synthetical measurement and appraise is necessary.
装备了检测手段先进的电气、热工、金属、土建试验室。
The means equipped with advanced testing of the electrical, thermal, metal, construction laboratory.
公司实行办公自动化管理，拥有电脑和检测设备、工器具，能优质高效地完成各项委托服务。
Office automation management companies, with computer and testing equipment, engineering equipment, to achieve high-quality and efficient services to the commission.
使用时按标记通入液压油即可检测，一般检修人员都容易掌握，简单方便，省工省时。
The detection can be performed only by filling the hydraulic oil, and the operation can be mastered by most of the maintenance workers.
本公司校准检测中心设有：力学、长度、衡器、电学、热工、几何量等专业校准实验室。
The calibration inspection center of the company consists of calibration LABS including Mechanics, Length, Weighing Apparatus, Electricity, Thermal Power, Geometry, etc.
本公司校准检测中心设有：力学、长度、衡器、电学、热工、几何量等专业校准实验室。
Thee calibration inspection center of the company consists of calibration labs including Mechanics, Length, Weighing Apparatus, Electricity, Thermal Power, Geometry, etc.
很多单工的通讯设备可以通过语音检测技术的应用实现收发状态的自动转换而以比较小的代价达到双工设备的功能。
Many traditional single simplex communication devices now can act as a duplex system under the help of voice activated module, which is actual voice activity detector.
瞬态脉冲试验是一种对桥丝式电火工品进行无损检测的方法。
Transient pulse test is one kind of nondestructive test method employed to test bridge wire electric explosive device (EED).
同向，从而证实了理论分析的工确性，解决了“单二”组合检测技术的多解问题。
Therefore, the truth of theory analysis is proven and the problem of many solutions has been solved.
通过对管壳式换热器现场测试工作进行总结，提出了管壳式换热器的传热性能的热工检测方法与校核计算方法。
Based on the on - site testing of the pipe - shell heat exchanger, ways to test and check - up the heat transfer property of the pipe - shell heat exchanger are suggested int...
在热工、化工、冶金等诸多工业过程检测中，流量检测占有很高的份额，也是过程检测的一大难点。
The flow measurement accounts for a large share of many process measurements in the industry, such as thermal engineering, chemical engineering and metallurgy.
在热工、化工、冶金等诸多工业过程检测中，流量检测占有很高的份额，也是过程检测的一大难点。
The flow measurement accounts for a large share of many process measurements in the industry, such as thermal engineering, chemical engineering and metallurgy.
应用推荐