方法根据实验研究成果，分析温度震荡引起的储层损害的机理。
Method Based on experimental study result, mechanism of formation damage from temperature oscillation is analyzed.
根据实验研究结果，提出了一个预测凝析油气体系蜡沉积的热力学模型。
According to the experimental results, a thermodynamic model of predicting wax precipitation in condensate-gas system is proposed in the paper.
根据实验研究结果拟合出了肋片管式冷凝换热器烟气强迫对流凝结换热的实验关联式。
The experimental correlations for the forced convection-condensation heat transfer of flue gas in the heat exchanger are obtained by the experimental study result.
根据实验研究的结果，研制和试产了增韧效果明显、技术经济性良好的两大类增韧尼龙合金产品。
Finally, the two types of toughened pa alloy products have been developed and produced, which were proved to possess high impact strength and good technical and economic performance.
TCDD在这个家族中毒性最强，被用作参照物，所有其它二恶英均根据实验研究确定相对于TCDD的毒性。
TCDD, the most toxic member of the family, is used as reference compound, and all other dioxins are assigned a toxic potency relative to TCDD, based on experimental studies.
为此本文根据实验研究的结果，建立了新的滑裂面计算模型，推导出了土压力计算公式，并被实测结果所验证，可供管道工程设计参考。
Accordingly, this paper constructs a new model of slipping interface and presents calculating formulas, which can be used as reference for that it has been validated bye...
根据实验研究结果进行的实际印刷表明，制备的珂罗版感光胶可明显改善感光胶的成膜质量，同时改善了珂罗版感光胶夏季易粘纸等印刷性能。
The printing work done in accordance with the research results shows that this new collotype sensitive glue can improve significantly the film quality of sen…
根据实验室的表示，这项研究完全是出于利他的意图。项目说明书中明确写道：“我们计划为有亲密关系的人比如情侣们研制一种新的远距离交流工具。”
The research has fully altrusitic intentions, according to the Laboratory. "We propose a novel remote communication device for close relationships like lovers," the project description explains.
CDC的Frieden说：“这推荐是根据实验室和病毒如何人际间传播研究的新信息做出的。”
"This recommendation is based on new information from studies both in the lab and person-to-person on how the virus spreads," said the CDC's Frieden.
然后根据实验心理学家查尔斯?斯宾塞博士的研究，根据你当时的心情，为你建议特别适合你的食物。
Then it suggests foods, based on research from experimental psychologist Charles Spence, PhD, that may be particularly good for you depending on whatever your mood is at that moment.
本文主要研究力矩电流产生器的频率特性和误差分析，同时根据实验结果评价了它的性能。
This paper investigates mainly frequency characteristic and error analysis, evaluates the performances of the torque current generator according to experimental results.
本文研究了正规嵌段聚醚分子结构与其表面性能：表面张力、HLB值、浊点之间的关系，并且根据实验数据建立了数学模型。
This paper study the relations between the composition of molecule and the sufact property of surface tension turbidity and HLB value, set up mathematics model depending on the test date.
报道小型太阳池的实验研究结果，并根据实验结果对太阳池的集热和蓄热性能作讨论。
The experimental studies on small solar pond are reported. The properties of collecting and storing heat that according to the result of experiment arc discussed.
针对本文的研究目的，本文对新型的汉字识别系统进行规模测试，验证本文系统的可行性，然后再根据实验结果分析本文系统的特性。
For the purpose of the research, this paper designs the tests to verify the feasibility of this system and analyze the characteristics of the system according to the experimental results.
对住宅建筑中U型钢-早强混凝土组合梁进行了试验研究，根据实验结果分析其受力、变形特征和破坏机理。
We carry out experiment and research to U section steel-early-strength concrete beams in residence building, analyze the forcing, deformation characteristic and destruction mechanism.
根据实验数据研究了规整填料层压降的关联，导出了规整填料层压降的关联式，计算表明，与实验数据相吻合。
The relation of pressure drop in the regular stacked packing bed is studied by means of the experiment data, and this relation is derived also.
文章根据实验室研究和生产实践，总结出了一套腈纶废水预过滤的操作方法，对生产实践具有重要的指导意义。
This paper summarized a set of operation methods for pre filtering of acrylic fiber wastewater based on lab research and production practice, which is of guiding significance for production practice.
根据这种现状，本文采用了理论研究、数据实验和实地调研相结合的方法来具体研究我国商业银行的数据挖掘应用问题。
Based on the situation, the article introduces a method combining theory research, data experiment and investigating on the spot to research data mining applying problem in our commercial Banks.
考虑到抚宁厂烧结原料将以进口矿粉为主，根据实际用矿的可能性和可行性，选用高比例进口矿粉进行烧结配矿实验研究。
According to the actual - situation that the Funing Steel Works would mainly use imported iron ore in the future, the sintering experiment with high portion of imported iron ore has been carried out.
根据实验结果对两种类型的节点提出了基于实验研究的节点核芯区承载力公式；
The core zone bearing capacity formulas of two types of joints based on the tests are brought forward respectively according to the tests.
通过室内填砂管渗流实验，研究了不同粘土类型、不同粘土比例的低渗透岩心在不同流体注入方式下的渗流特性，并根据实验结果分析了其渗流机理。
Using the sand pack model, the percolation features of low permeability cores with various clay minerals and different proportions of clays are studied under different fluid injection patterns.
本文根据实验观察，对高速切削条件下连续型带状锯齿形切屑的形成过程进行了分析研究。
Based on the experimental observation, the high speed formation courses of the continuous banding serrated chips are studied and analyzed.
根据实验数据研究了煤粉颗粒的分形特征及其煤粉粒度分布分形维数与其固定碳及挥发分含量的关系，提出了基于考虑能量、环境、安全的煤粉燃烧锅炉的煤粉经济细度新概念。
Fractal dimension and its relation with fixed carbon and volatile have been studied. Bring up a new concept of economic granule of coal powder in coal fired thermal power plant.
最后，研究者根据实验结果和对原因的分析，有针对性的为幼儿韵律活动能力的培养提出了一些教学建议。
Finally, researchers on the basis of experimental results and analysis of the causes, targeted figure for the child care capacity-building rhythm made a number of teachings.
本文根据实验测得的熔深数据完成了焊接坡口形式与尺寸对埋弧焊熔深影响的试验研究。
According to penetration data required from test, this paper has finished the test re search that welding groove types and dimensions of pressure vessel effect the SAW's penetration.
研究了影响化学镀铜镀速和镀液稳定性的诸因素，并根据实验确定了适宜的化学镀铜液配方及其工艺。
Factors affecting stability and deposition rate of electroless Cu are investigated and proper formulation and process for electroless Cu bath determined.
同时对不同热源形式、热源大小以及热源位置对空调射流和室内热舒适性的影响进行了实验研究，并根据实验结果对热源与射流的相互作用进行了讨论。
The influences of the form, power and location of indoor heat sources on the non-isothermal air jet and the indoor thermal comfort are investigated experimentally.
本文根据实验观察，对高速切削条件下连续型带状锯齿形切屑的形成过程进行了分析研究。
Study on microscopic characteristics of adiabatic shear bands in the serrated chips formed during high speed machining;
本文根据实验观察，对高速切削条件下连续型带状锯齿形切屑的形成过程进行了分析研究。
Study on microscopic characteristics of adiabatic shear bands in the serrated chips formed during high speed machining;
应用推荐