核心电路为两级直接耦合差分放大器。
The core circuit is two stages of direct-coupled difference amplifier.
然而，另一个值得注意的漂移来源则来自于核心电路之外。
However, another significant source of drift exists outside of the core circuit proper.
检测系统的硬件设计包括FPGA核心电路的设计；
The hardware design of detection system includes the core circuit of FPGA;
波整形电路从核心电路的锯齿波得到其他想要的波形——方波，脉冲波，三角波。
Wave shaping circuits derive the other desired waveforms — square, pulse, triangle, etc. — from the sawtooth output by the core circuit.
核心电路采用非平衡源极耦合对结构作为整流器，具有良好的全波整流功能；
The main architecture of the circuit adopts the unbalanced source-coupled pairs for rectifier, which shows a good performance in full-wave rectifying;
目前为止频率对于VCO核心电路的控制电压的应答表现出线性特征，也就是说，瓦特／赫兹。
The response to the control voltage of the VCO core circuit presented here is linear; that is to say, volts/Hz.
文中对两种时间参数和数字化测量进行了探讨，并详细分析了核心电路的工作过程。
In this paper, the digital measurement of two kinds of time parameters is discussed. Then, the working process of key circuit is analyzed in detail.
增益调制器作为功率因数校正电路的核心电路，通过控制输入电流来得到一个高的功率因数。
As the heart of the power factor correction circuit, the gain modulator gets a high power factor by controlling the input current.
出于ESD考虑，在输入输出采用保护电路：采用保护环隔离电阻电容，减小其对核心电路的影响。
Taking into consideration of ESD, the guard ring is adopted to isolate resistors and capacitors, thus to eliminate the influence in the main circuit by them.
根据高频机箱中受控对象的使用要求，采用AT 89 C52为核心电路，设计了多路电压量输出控制器。
According to usage request of controlled objects in high frequency box, adopt AT89C52 for the core electric circuit, designed multiplex voltage output controller.
这样一来，研究人员在现场可编程门阵列芯片上创造出来1000个迷你电路，成功地将电脑芯片变成1000核处理器，每个核心在各自的指令下执行任务。
By creating more than 1,000 mini-circuits within the FPGA chip, the scientists effectively turned the chip into a 1,000-core processor - each core working on its own instructions.
在一个集成电路中，多个芯片、共享内存以及互连形成了一个紧密集成的多处理核心(参见图4)。
On a single integrated circuit, multiple chips, Shared memory, and an interconnect form a tightly integrated core for multiprocessing (see Figure 4).
很简单，核心（core）就是执行计算机命令的电路部件。
Quite simply, a core is the circuitry that executes computer commands.
实践证明，以单元电路为核心的模拟电子技术课程内容体系在教学中取得了良好的效果。
Practice show that, the curriculum content system of simulation electronic technology which take unit circuit as the core has achieved good effect in teaching.
电子组件——四千个晶体管组成的逻辑门电路所形成的微处理器核心——使用并五苯材料制成，这是一种易弯曲的有机材料，能作为某种半导体使用。
The electronic components-4, 000 transistors organised into the logic gates that form the core of a microprocessor-are made of pentacene, a flexible organic material that can act as a semiconductor.
电子组件——四千个晶体管组成的逻辑门电路所形成的微处理器核心——使用并五苯材料制成，这是一种易弯曲的有机材料，能作为某种半导体使用。
The electronic components-4,000 transistors organised into the logic gates that form the core of a microprocessor-are made of pentacene, a flexible organic material that can act as a semiconductor.
集成电路产业是现代信息产业的基础，是改造和提升传统产业的核心技术。
Industry of the integrated circuits is the foundation of modern information industry. It is the core technology to transform and promote the traditional industry.
最后，设计了变换器的硬件电路和软件流程。实现了以TMS320F 2812DSP芯片为控制核心的样机。
And then, designed hardware circuit and software flow, realized a sample using TMS320F2812 DSP as kernel controller.
设计了以电力电子元件IGBT为核心器件的功率主电路。
Then, the main power circuit taking electric electronic component IGBT as key device is designed.
本文使用双电流控制模式，以智能芯片uc 3842为核心，设计了单片开关电源的实用电路。
In this paper, by the use of dual-current control mode and intelligent UC3842 chip as the core, a single-chip switching power supply circuit are presented.
实践证明，以单元电路为核心的模拟电子技术课程内容体系在教学中取得了良好的效果。
Practice show that, the curriculum content system of simulation electronic technology which take unit circuit as the core has achieved good effect.
该仪器以单极微机为核心，配置旋浆流速传感器、尾舵式流向传感器、相应的接口电路和软件。
The apparatus consists of a single board microcomputer, propeller type velocity sensor, tail fin type flow direction sensor and corresponding interface circuits and software.
电子标签芯片是无线射频识别(RFID)技术的核心，其模拟电路的设计十分关键。
Transponder IC is the core of Radio Frequency Identification (RFID) technique, and its analog circuit design is very important.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
本文主要论述3G核心网电路域设备性能测试话务模型、测试组网、测试工具、测试内容等，为相关测试提供经验。
This paper focuses on 3G core network equipment performance testing traffic model, network testing, test tools, test content, and so on, provide experience for the relevant tests.
详细叙述了SPC技术的核心工具控制图技术及其在微电路生产中的应用。
The control chart being core tool of SPC technology and its application in microcircuit manufacture are described in detail.
方法：基于C8051F 020和AD 9832的核心控制电路通过动态阻抗匹配法使系统输出最大超声波功率。
Through dynamic impedance matching by kernal control circuit based on C8051F020 and AD9832, the maximum output of ultrasound power is produced.
论文对核心器件的选型，单元电路的设计，控制原理以及控制算法都进行了详尽的说明。
In this part, some points are presented in detail, including hardware choosing, unit circuit design, control principle and control algorithm.
论文对核心器件的选型，单元电路的设计，控制原理以及控制算法都进行了详尽的说明。
In this part, some points are presented in detail, including hardware choosing, unit circuit design, control principle and control algorithm.
应用推荐