多家数据的样条拟合，已有不少工作，但都没考虑相关误差。
There are many works on spline function fit, but they do not take into account correlativeerror.
用累加弦长参数三次样条拟合不规则曲线，使拟合后的曲线光滑圆顺。
This paper describes the method that the irregular curve is fitted with accumulated chord length parametric cubic spline.
在第三章，为了得到点到空间曲线距离的快速计算算法，我们研究了利用圆弧样条拟合点集的问题。
In chapter 3, in order to obtain a fast algorithm of computing the foot point of a given point to a spiral curve, we study the problem of circular spline fitting.
本文给出了用二级负指数样条拟合“药时曲线”的一种方法，用该法拟合“药时曲线”的效果是满意的。
In nedical research "medical time curve" is the base for giving medcine. this paper provides you with a method of using second order negativeexponenti…
经过实测数据仿真试验表明，样条拟合能较好地兼顾最优拟合与曲线光滑度的选择，算法的预测效果良好。
Results of the test using field data show that the spline fitting can make a better compromise of best fitting and smoothness, and the algorithm performs better in short-term traffic flow forecasting.
根据短道速滑冰刀的特点提出了用G1连续圆弧样条拟合短道速滑冰刀弧度曲线，以此建立短道速滑冰刀刃磨的数学模型。
A thought of grinding the blade curve of skates for short track speed skating with G1 continuous arc splines is presented according to the skates blade properties.
样条法在利率期限结构的拟合精度、曲线光滑性及平稳性方面的综合效果最好。
The result also reveals that B-spline model performs better than other models integralively in precision of fitting prices, curve smoothness and stability.
文中将GA用于三次样条函数拟合的系数求解，避开了矩阵求逆的繁琐问题，结合具体例子作了一些探索。
GA is used to obtain coefficients of cubic spline function fitting to avoid the inverse of the matrix and some work is made with an example.
介绍了用三次样条函数作通风机性能曲线拟合的方法。
The method of using cubic spline function as fan characteristic curve fitting is introduced.
介绍了用三次样条函数作通风机性能曲线拟合的方法。列出了计算实例，并对具体问题做了说明。
The method of using cubic spline function as fan characteristic curve fitting is introduced. The calculating example is provided and description is made for the specific problem.
在拟合每个轮廓线时，先用非接触测量系统测出的数据反算出ee样条曲线控制多边形的顶点。
When fitting each contour line, the points measured by non - contact measuring system are as the top points about control polygon for forming EE spline curve.
本文研究了样条曲线拟合中常遇到的两种畸变点的处理方法。
The approaches to the treatment of two kinds of distortion points often encountered in spline curve fitting are investigated in this paper.
本文在这两种方法的基础上提出用样条函数拟合纸上定线中的离散点，并给出公式推导和示例。
On the basis of these, this paper uses mode function to imitate the disperse dots, and give formulas and examples.
根据凸轮机构的检测数据利用三次周期样条函数插值法对凸轮实际廓线进行曲线拟合。
Curve fitting of the actual CAM profile with the Cubic-periodic spline function according to the measured data of the CAM.
本文讨论了用非参数模型对儿童生长曲线进行拟合，给出了两种非参数曲线拟合方法：光滑样条和核估计。
This paper discusses childhood growth curve fitting by nonparametric models, and provides two methods for nonparametric curve fitting: smoothing spline and kernel estimator.
其中利用了样条磨光方法对地形高差离散值进行拟合磨光求得曲面近似函数，用之参与计算。
The spline polishing method is used for dispersion value of typography elevation difference to conduct fit polishing so as to get the near function which is used in calculation.
本文提出一种新的基于三次样条曲线的面积误差反馈曲线拟合方法。
A new curve fitting method using area error feedback based on cubic splines is presented.
根据风力机叶片设计的实际过程，在三次参数样条曲线拟合叶片翼型曲线的基础上，提出了一种在计算机上能立体显示叶片截面及其结构的程序设计方法。
On the basis of blade airfoil curve fitted with triple spline function and the practical process, a kind of program design method is offered to display the section of WECS blades and its structure.
描述了确定三次样条曲线拟合参数的方法。参数包括节点数、节点位置和与系统误差相联系的权重。
The parameters including knot Numbers, knot positions and the weights associated with the systematic errors in the cubic spline curve fitting method were discussed.
因此，这里采用三次样条函数拟合曲线构造模具型腔廓线，其型值点由已有模具型腔测得。
So it adopt cubic spline function to structure die cavity outline in this article, the model points may be surveyed on die cavity surface.
基于样条最小二乘数据拟合方法建立的数学模型不仅可以提高模型精度和拟合程度，而且模型阶数较低，光滑性好。
The mathematical model built by the data fit method based spline least square has not only higher precision of model and fit coherence, but low degree of model, more smooth also.
对于参数曲面，采用先离散，再重新拟合的处理方法，建立统一的双三次参数样条曲面通用工件模型。
The input parametric surfaces are discrete, then we will get new surfaces with bicubic parameter spline function and build uniform workpiece model.
使用样条函数可以准确拟合计算柴油添加剂降低碳烟排放效果的实验数据。
The spline function can be used in calculating accurately the experimental data of diesel fuel additives for lowering the smoke emission from diesel engines.
通过对几种常用的CAD造型方法的比较，对常用而复杂的喷管离散点型轮廓段的拟合插值采用三次参数样条曲线来完成。
After comparing several common CAD modeling methods, the cubic parameter-spline curve is used to approach and interpolate discrete contour of usual and complicated rocket jet.
通过对几种常用的CAD造型方法的比较，对常用而复杂的喷管离散点型轮廓段的拟合插值采用三次参数样条曲线来完成。
After comparing several common CAD modeling methods, the cubic parameter-spline curve is used to approach and interpolate discrete contour of usual and complicated rocket jet.
应用推荐