对立柱垫块及拉紧螺栓进行了校核分析。
仿真结果和理论分析结果相一致，所使用的仿真方法及得到的分析结果对工程设计及性能校核具有重要的参考价值和指导意义。
The simulation results are coincident with the theory analysis ones. The simulation method and results possess an important reference value and guidance to engineering design and capability checkout.
对影响误差的因素进行了分析，并用校核实验验证了装置的准确性和精确性。
The effect factors of error were analyzed, and the accuracy and precision were verified by checkout experiment.
本文通过对高校核心竞争力的内涵、特点和作用的分析，提出了培育高校核心竞争力的原则、方法和路径。
This article put forward the principles, methods and channels of developing the core competence of higher education by analyzing its implication, characteristics and functions.
运用结构力学的矩阵分析法和计算机对抽芯作业车主体金属结构做了力学分析与计算，进而校核主体金属结构的强度、刚度和稳定性。
Mechanical analysis and calculation of the truck's metal construction are made by the matrix method, and the strength, rigidity and stability of the metal construction are checked.
在分析传统卷筒壁厚设计与稳定性校核方法的基础上，对起重机卷筒进行了有限元分析。
Based on analyzing the wall thickness design and stability checking method of drum, the finite element analysis of the crane 'drum is studied.
因为结构优化设计从最初被动的分析校核上升为主动的设计与优化，所以结构优化设计也具有了更大的难度和复杂性。
Because optimization design make the task of calculation mechanics change to the active design and optimization from passive analysis and checkage, it is more difficult and more complicated.
下篇针对瀑布沟泄洪洞进口闸室的抗震分析，为闸室结构的动力校核和结构配筋提供了依据，研究成果为设计所采纳。
The second part is about the aseismic analysis of lock chamber of Pubugou hydroelectric power station. The study results offer the rule of designing of lock chamber structure.
文中对钢丝滚道轴承的承载能力进行了校核，对主要结构件的刚度进行了分析计算。
The paper tests bearing capacity of steel wire rolls track bearing, analyzes and calculates rigidity of principal structure.
本文针对这些问题，通过选择合适的缆索力学模型并进行力学分析，得出相关的计算、校核公式。
So this paper aim at these questions, though choose suitable mechanics model of cable and analyze the model to educe correlative formula of calculate and validate.
根据局部应力的理论分析，提出直立容器支承式支座处强度校核的新方法。
The introduces the new method for strength checking of vertical vessel bearing support based on theoretical analysis of local stress.
本文结合散装谷物船舶运输中配载的实际情况，具体分析了谷物的特性和IMO对散装谷物船舶稳性校核的要求。
This paper particularly analyze the characteristic of bulk grain and request of stability check of IMO combining the loading practice in transport of bulk grain carrier.
对轴向轴承的结构设计原理及其参数的选定进行了具体的阐述，其中对强度分析和热校核也一一进行了讨论。
After that, this dissertation expatiates on the principles of structure design and the method of choosing parameters of axial bearing and discusses the analysis of strength and thermal verification.
介绍了TY 2B型接触网作业车的立柱结构，并利用I-DEA S软件对结构强度进行分析和校核。
This artical introduces the pillar structure of Type TY2B Catenary Work Car, analyzes and revises the strength of the structure using I-DEAS software.
在对回转支承进行受力分析、强度校核的基础上，对原设计作了几点改进，如加大钢球直径、增加高度、选用高级合金钢材料等。
Based on the force analysis and strength check on the gyroscopic support, the original design has been improved, such as enlarging the diameter of steel material.
其次，对环形炉烟囱结构进行了有限元力学分析和承载力、受热温度、裂缝、变形校核。
Secondly, the finite element mechanical analysis and some check including bearing capacity, heating temperature, fracture and deformation about hoop-stove chimney are processed.
根据实际生产中托盘的使用性能要求，对塑木托盘在静载、动载条件下的力学性能进行分析和必要的校核。
According to the requirements of stock's using performance in practical production, the mechanical properties of plastic-wooden stock under static and dynamic load were analysis and checked.
根据分析结果进行强度校核和结构优化。
According to the analysis result, intensity inspection and structure optimization are executed.
采用正交试验的方法对基于柔性悬臂梁的一维柔性结构进行了参数优化设计以获得最大的输出位移：对最优结构进行了强度校核、模态分析。
The geometry of the flexible cantilever based one dimension compliant mechanism is optimized to get the biggest output displacement by using orthogonal arrays and analysis variance.
采用有限元法对加氢反应器裙座支撑区进行有限元分析及优化设计，并对其危险截面作应力评定和强度校核。
The finite element method is applied to analysis and optimize the design of the hydrogenation reactor skirt support area, and stress of the risk section is assessed and strength is checked.
文章对井架总体稳定校核所用的计算公式及分析问题的方法和准则也作了介绍。
The formulas used for checking the integral stability of derrick and the method and criterion of analysing the problems arc also presented here.
第五章，利用有限元分析软件对实验台的关键件主轴、曲柄联接柱及长杆固定座进行有限元分析，并进行了强度校核和结构优化。
The fifth chapter studied the key shaft, linking brace and pole base of experiment platform, using the finite element analyzing software, providing the intension checking and structure optimizing.
石化管道应力分析中，二次应力的校核是最基本的强度校核之一。
In stress analysis of petrochemical pipe line, the secondary stress check is the one of basic strength check.
应用有限元方法来分析校核管线的强度。
Lastly the Finite Element Method (FEM) is applied to analysis and checking the strength of pipeline.
同时采用了有限元的分析方法对其进行强度校核，结果满足强度要求。
Meanwhile, it applies the finite element analysis to make strength check, the result satisfies the strength requirement.
分析了液化石油气贮罐在设计过程中，不同的工作环境真空校核问题。
Vacuum checking problems under the different working environments were analyzed in the design process of liquefied petroleum accumulator pot.
该体系适用于舰用汽轮机的校核计算和变工况性能分析。
The system under discussion is suited for the naval steam turbine verification calculation and performance analysis for off-design conditions.
围岩支护是依据岩体分类Q系统采用经验法设计，然后采用数值分析校核。
The support design is based on empirical approach from rock mass classification Q-system; and it is then verified by the numerical analysis.
围岩支护是依据岩体分类Q系统采用经验法设计，然后采用数值分析校核。
The support design is based on empirical approach from rock mass classification Q-system; and it is then verified by the numerical analysis.
应用推荐