结论低温等离子体表面处理技术可用于提高树脂材料表面润湿性。
Conclusion the plasma treatment can be used to promote the surface wettability of denture base acrylic resin.
处理过的玻璃表面有从树脂混合物中吸附出一种或几种组分的能力，而这些组分对树脂完全固化是很必要的。
The surface of the finished glass has the power to adsorb out of the resin mixture one or more constituent necessary for complete curing of the resin.
粉末涂料是一种颜料和干粉末树脂的细研磨粉粒的混合物，是一种当今使用的最新表面处理技术。
Power coatings, the mixture of fine milling powders of pigment and dry power of resins, are the latest technology for surface treatment currently used today.
实验结果表明：超声处理使树脂的黏度和表面张力降低，RTM浸润性改善显著，从而提高了复合材料的力学性能。
The results show that ultrasonic treatment degrades the viscosity and surface tension of resin and improves RTM impregnation, which enhances the bend property of RTM composites.
结论：低温等离子体处理树脂材料表面可提高其润湿性及粘接性。
Conclusion: Low temperature plasma treatment might be used to improve the surface wettability and bonding strength of denture base acrylic resin.
同时采用脲醛树脂对植物纤维进行表面处理，有效地改善了复合材料的物理性能。
Meanwhile, the mechanical properties of plant fiber cement-based composite materials have been effectively improved through treating the surface of plant fiber by urea-formaldehyde resin.
水嘴：采用“科艺牌”全铜质精铸成型实验室专用水龙头，阀芯采用国际通用的瓷阀芯，表面经环氧树脂粉沫喷涂处理。
Nozzle; High quality'kerric'faucet, and its valve spool are used the international porcelain valve spool, its surface is coate with epoxy resin power.
本厂系专业真空电镀塑胶。陶瓷。玻璃。树脂。五金等各类产品及表面处理，颜色多种多样。
Department of Professional vacuum plating factory plastic. Ceramics. Glass. Resin. Hardware various products and surface treatment, a variety of colors.
用环氧和有机硅树脂涂料对由聚乙烯／炭黑（PE／CB）制备的正温度系数（PTC）电路保护元件的表面处理及其工艺进行了研究。
The packaging materials and processes of positive temperature coefficient (PTC) devices made up of the composite of polyethylene and carbon black(PE/CB) for over current protection were studied.
同时用合成的强粘附力树脂，对颜料进行表面处理，达到极好的防沉性和乙醇可溶性。
At the same time, synthetic resin of strong adhesion is used to process the surface of the pigment and achieve perfect anti-precipitation and ethanol soluble properties.
采用腰果壳油改性环氧酚醛树脂漆，对不经表面处理的聚丙烯塑料坯胎进行涂饰，具有良好的附着性、干性、硬度和光泽。
A cashew shell oil modified epoxy phenolic paint has been developed, which can be applied on the untreated polypropylene surface with good adhesion, high hardness, fast curing and glass.
采用环氧树脂-DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
用改性环氧树脂和经at型表面处理剂处理的石棉纤维来制取增强塑料。
Asbestos fiber treated with AT-type surface treatment agents and modified epoxy resins are compounded for manufacturing reinforced polymer composites.
永盛精选优质的PTFE薄膜作为胶带基材，经过特殊表面处理，单面涂上一层硅树脂粘胶而制得特氟龙薄膜胶带或带衬纸卷状自粘胶带。
Youngsun selects high quality Pure Teflon film, with a special surface treatment and then coating with high quality silicone adhesive to produce the PTFE film adhesive tape.
本文较系统的综述了国内外增强树脂用玻璃纤维、碳纤维及芳纶纤维表面处理的方法，对各种改性技术的特点进行了评述，并指出了其进一步的发展趋势。
The surface treating methods of GF, CF and AF used in resin matrix are summarized in this paper. The characteristics of these methods and their further development are also discussed.
以金属作为基底，环氧树脂作为涂层材料，采用电化学阻抗谱技术研究表面未经处理、经硅烷处理和经磷化处理试样的环氧涂层酎蚀性能。
The anticorrosion behavior of untreated, silane treated and phosphating treated metal surface on metal is studied, and the epoxy resin is used as coating.
目的：探讨4种不同表面处理对义齿软衬树脂与硬质树脂之间黏结强度影响。
PURPOSE: This study evaluated the influence of bonding strength of heat-polymerized denture soft reline resin by 4 different surface treatments bonded to denture base resin.
表面采用环氧树脂静电喷塑处理，颜色可根据客户需求，并具有极强防腐、防锈效果。
Of strong corrosion resistance and rust resistance because it is treated by static powder paint coating. Colors will depend on customers.
根据被粘接材料的种类，正确选择多正树脂相应的表面处理剂并按规定程序对粘接物表面进行处理；
Select the appropriate GOOD primer according to the type of bonding materials. Treat surface of the materials by the procedures.
超临界二氧化碳处理过的碳纤维纤维表面粗糙度增加，并且碳纤维与树脂的浸润性增加。
After the SCCO2 treatment, the surface roughness of treated carbon fiber and the wettability increased.
研制了用于UHMPE纤维表面处理的连续化学处理装置。将经过处理的UHMPE纤维与环氧树脂体系制备成复合材料。
A device for the chemical treatment of fiber surface was designed and installed, with which UHMPE fibers were treated continuously.
结果表明，对原砂进行表面处理可以提高粘结剂的粘结效率，提高覆膜砂的强度，减少树脂加入量，降低发气量。
The results have shown that the precoated sands with low resin content, high strength, and low gas evoluti…
而对于环氧树脂胶合试件来说，丙酮表面处理处理前后压缩剪切强度的差异不大。
As for the epoxy adhesive, there was little difference before and after acetone surface treatment.
结论：经过表面处理的纳米二氧化钛和纳米二氧化锆能够均匀的渗入牙科复合树脂中。
Conclusion: Decorated nano TiO2 and nano ZrO2 could be permeated into dental composite resin evenly.
复合树脂是一种由有机树脂基质和经过表面处理的无机填料以及引发体系组合而成的牙体修复材料。广泛用于各类牙体缺损的直接和间接修复。
Composite resin is a kind of dental material composed of resin martrix, pre-treated filler and initiating system which has been widely used in dental restoration.
表面处理有镀叻、锌、金、银、铜、煲黑、环氧树脂喷涂及热处理等；
The techniques for surface are plating nickel, zinc, gold, silver, copper, the wreath oxygen resin spraying and the heat disposing etc.
表面处理有镀叻、锌、金、银、铜、煲黑、环氧树脂喷涂及热处理等；
The techniques for surface are plating nickel, zinc, gold, silver, copper, the wreath oxygen resin spraying and the heat disposing etc.
应用推荐