目的：研制一种新高分子合成树脂类义齿粘附剂。
Objective: the purpose of this study was to develop a new kind of synthetic macromolecular resin class of denture adhesives.
树脂类粘胶剂等化学剂粘合的作用也极好，但本钱偏高。
The role of the class of resin adhesive and other chemical bonding is also very good, but the money is on the high side.
目的研究树脂类粘结剂边缘厚度与全瓷冠边缘微渗漏的相关关系。
Objective To investigate the relationship between marginal film thickness of resin luting cements and microleakage.
公司以生产鱼缸装饰品、流水盆景为主，同时兼做各种树脂类工艺产品。
We main manufacture aquarium decorations, water fountain and also go on the production of resin craftwork.
由于这种酸性蒸煮液不能去除木材中的树脂类物质，所以浆料中树脂含量相对较高。
The pulp has a comparatively high resin content, since the acid cooking liquor dose not remove the resinous matter found in the wood.
鉴于上海地区高温的气候特点，选择树脂类改性剂ldpe制作改性沥青，分析了PE改性沥青的改性机理。
LDPE is selected for making modified asphalt to analyze the mechanism of PE modified asphalt in view of the climatic characteristic of high temperature in the Shanghai area.
我们是一家专业从事出口的艺术品公司。主要提供各种手工类工艺产品，树脂类艺术品，精品和圣诞类产品。
We are a professional supplier in all kinds of arts and crafts, colophony artwork, fine handicraft and Christmas products.
由于石油的主要成分包括饱和烃、芳香烃类化合物、沥青质、树脂类等，这些物质难以降解，并且对水生生物有毒杀作用。
The main components of oil are saturated hydrocarbons, aromatic compounds, asphaltenes, resins, and so on. It is difficult to degrade these substances which are bad for aquatic life.
2009年美国出口中国的前五类产品是油籽和谷物，废物和废料，半导体和电子零件，飞机及零部件，和树脂类(见表3)。
S. exports to China in 2009 were oilseeds and grains, waste and scrap, semiconductors and electronic components, aircraft and parts, and resins and synthetic rubber and fibers (see Table 3).
它与丙烯酸树脂类阴离子复鞣剂配伍性好，且有助于对阴离子材料的吸收与固定，基本上克服丙烯酸树脂类鞣剂的“浅色效应”。
The combination of this product with acrylic resin is good, and it can also help to absorb and fix anionic materials, and can primarily overcome the effect of light shade caused by acrylic resin.
研究人员称对琥珀的研究证明这个琥珀是现在依然存在于东南亚地区的一类热带硬木树种的树脂形成的。
The researchers said that an analysis of the amber shows that it was formed from the resin of a family of tropical hardwood trees that still exist in south-east Asia.
目的研究大孔吸附树脂对大黄总蒽醌类物质的纯化和制备。
Objective to purify and prepare the total anthraquinones from Radix Et Rhizoma Rhei by macroporous resin.
一类固体或半固体的天然的或合成的有机材料，一般为无清晰熔点的高分子量材料，多数树脂为聚合物。
Any type of solid or semi solid organic material of natural or synthetic origin, generally of high molecular weight with no defined melting point. Most resins are polymers.
所得产物具有良好的耐热性，用改性松香类水性醇酸树脂制备的底漆具有较好的性能。
It has shown that the product provide good heat stability and good performance of the primer based on rosin-based waterborne alkyd resin.
复膜胶、白乳胶、压敏胶、尿醛胶、乙醇稀料、建筑胶、大力胶、双组份胶、呋喃树脂胶等类制造。
Fumo plastic, white latex, pressure, urine aldehyde plastic, ethanol diluted materials, construction plastic, strong plastic, Shuangzufen plastic, furan resins such as plastic manufacturing.
本文比较详细地介绍了环氧树脂两类固化剂。
This paper introduced detailed two kinds of hardener of epoxy resin.
目的筛选大孔树脂分离纯化地菍中总酚类物质的最佳工艺。
Objective To explore the optimal techniques in separation of phenols from Melastoma dodecandrum with macroporous resins.
淀粉类高吸水性树脂包括淀粉接枝丙烯腈、淀粉接枝丙烯酸、淀粉接枝丙烯酰胺等。
Starch graft polymer super absorbent resin contains starch graft acrylonitrile, starch graft acrylic acid, starch graft acrylamide etc.
低粘度弹力浇铸树脂，建议与先加入的硅微粉和胺类固化剂合用，用于低压电缆的连接。
Low viscosity resilient casting resin. Recommended for pre-filled silica formulations with low caking tendency used with amine curing system for low voltage cable joints.
通过接枝反应合成了一系列侧链含联苯类介晶基元的聚醚型树脂，并对合成工艺进行了探讨。
A series of polyether resins with pendent biphenyl mesogenic groups were synthesized, and the synthetic technics were discussed.
目的在PM MA树脂义齿表面沉积类金刚石碳(dlc)膜改善义齿的耐磨性能。
Objective To improve the function of the wear-resisting of PMMA resin denture through depositing the film of diamond like carbon (DLC) on the surface.
低粘度浇铸树脂，建议与胺类和聚肽胺类固化剂组合用于低压电器。
Low viscosity reactive casting resin. Recommended with amine and polyaminoamide curing agents for low voltage electrical and electronic applications.
酚三嗪系列树脂具有优异的耐高温性，在高温下有良好的机械强度和成型加工性能，是一类具有广泛应用前景的新型热固性树脂。
Phenolic triazines resins are of excellent heat-resistance, good mechanical and process properties at high temperature. It is a new thermoset resin that has extensive applied prospect.
与酸酐类固化剂组合的浇铸树脂，用于绝缘体，开关等，有高的机械强度和F级的绝缘性能。
Casting resin used with anhydride hardeners for making insulators and switchgear components of high mechanical strength, for class 'f' Insulation.
农用塑料薄膜以其生产使用的树脂原料不同一般可分为聚氯乙烯农膜和聚乙烯农膜两类。
The plastic farm film can be classified into PVC farm film and PE farm film depending on resin raw materials used in production.
松香改性酚醛树脂是平版油墨用连接料树脂的主要代表，也是印刷油墨中用量最大的一类树脂。
The rosin modified phenolic resin, a mainly important one among all resins used as bands for offset inks, has the call for printing ink.
研究了DCPD酚环氧树脂与酸酐及胺类固化剂的固化反应活性。
It was studied on the curing activity of DCPD phenol epoxy resin with anhydrides and amines.
采用电弧离子镀膜方法，以高纯石墨为碳离子源在PM MA树脂义齿表面沉积类金刚石膜。
By the technology of vacuum cathodic arc deposition, graphite as cathode, Diamond like carbon film (DLC) was deposited on PMMA resin denture.
按其产物和用途可分为6类：药用植物、油料植物、纤维植物、树脂和树胶植物、芳香油植物以及淀粉植物等。
Classified by natural products and utilization they can be divided into 6 types: medicinal plants, oil plants, fibre plants, colophony and balata plants, perfume plants and amylum plants.
文中分析了淀粉类吸水树脂、纤维类和合成类吸水树脂的机理及性能。
The paper analyses the mechanism and performances of starch injectivity resin. fibre injectivity resin and synthetic injectivity resin.
应用推荐