合适任何品牌树脂材料。
模板通过注塑成型技术由合成树脂材料形成。
The form panel is formed of a synthetic resin material by an injection-molding technique.
传统的树脂材料通常只能满足其中一方面的要求。
树脂材料的选用使得光学系统的总重量大大减轻;
The weight of system is reducing largely due to resin lenses;
离子初始质量浓度对树脂材料的吸附率影响不大。
The original ion concentration has less impact on adsorption rate.
为自由基型高分子光敏树脂材料的应用打下了基础。
This research provides a good basis for application of free radical photosensitive resin.
高折射率光学树脂仍然是光学树脂材料研究的主要方向。
The research on the optical resins with high refractive index is still the main trend of resin lens development.
结论低温等离子体表面处理技术可用于提高树脂材料表面润湿性。
Conclusion the plasma treatment can be used to promote the surface wettability of denture base acrylic resin.
结论:低温等离子体处理树脂材料表面可提高其润湿性及粘接性。
Conclusion: Low temperature plasma treatment might be used to improve the surface wettability and bonding strength of denture base acrylic resin.
该圆柱体包含在一个由柔软、透明的硅树脂材料制成的可充气外壳之中。
This, however, is contained within an inflatable shell made of a soft, transparent silicone-based material.
浴室的墙面采用防水白树脂材料,使得墙面容易维护,并有发光的效果。
The walls of the bathrooms are finished in waterproof resin which provide a singular surface that is both luminous and very easy to maintain.
据公司网站描述,这种硅树脂材料的面具“与真人的肉及肌肉非常相似”。
The silicone masks "look and behave like real flesh and muscle," the company's website says.
Shepard表示公司生产的一种树脂材料需要花上六个月至一年时间的商业化过程。
Shepard says that materials from one resin they produce are probably six months to a year from being ready for commercialization.
一节节的碳和玻璃纤维从机器中通过,并涂抹上树脂材料,然后缠绕上金属支架。
Lengths of carbon and glass fibre are drawn through a resin bath by the robot, and then wound around metal scaffolding.
那是由于由树脂材料制作的楼顶大字制作广告牌成本低,质量好,亮度强,成本低。
It is because of low cost, good quality, high brightness, low cost and low cost, which is made of resin materials.
可固化树脂材料组合物,光学材料,发光器件,制备发光器件的方法,和电子器件。
Curable resin material composition, optical material, light-emitting device, method for producing light-emitting device, and electronic device.
创想树脂材料有限公司创建于2004年初,是专业设计制作树脂腰线的知名企业。
Was founded in early 2004, is located, is designed to produce professional resin waistline of well-known enterprises.
对树脂-金属复合材料进行了力学性能测试,结果表明,将树脂材料的强度提高了2~4倍。
Mechanical performance of hybrid material with resin and metal is tested, and the results indicate that strength is enhanced about 2-4 times compared with the SL part.
而且,为了抑制湿气穿透到电池中,吸收湿气的湿气捕捉剂可以混合在前盖和后盖的树脂材料中。
Also, to suppress that moisture is penetrated into a battery, a moisture trapper absorbing moisture may be mixed in the resin material of the front cap and the rear cap.
分别采用丙烯酸类聚合物与硅树脂材料实现了长周期光纤光栅(LPFG)的大范围波长调谐与温度补偿。
Both acrylate-based polymer and silicone resin were proposed as recoating materials for broadband wavelength tuning and temperature compensation of LPFG.
酚醛型氰酸酯树脂是耐烧蚀性能最好的树脂材料之一,它具有优异耐热性和介电性能,同时又具有一定力学性能。
Novolac cyanate ester resin is one of the high ablative-resisting polymer based materials. It also has superior heat-resistance, dielectric and mechanical properties.
普通空间地板采用的是中性灰聚氨酯树脂材料,而员工所占据的区域因为使用了柔软的地毯和胶合板,反而更舒适一些。
The general Spaces feature neutral, gray polyurethane resin on the floor whereas the areas occupied by the employees are cosier thanks to using soft carpet and plywood.
为改善流体的流动在流体中所使用的添加剂。减阻剂常由聚合物或树脂材料制成,这些材料在固体颗粒上形成光滑的表面。
An additive used in a fluid to improve its flow. Friction reducer are often made of polymer or resin material that forms a slick surface on solids.
临床医生对牙折裂修复技术进行了适当的分类,包括斜面设计、削尖式肩台、牙本质和釉质沟、复合树脂材料的选择以及牙碎片再附着过程的技术细节。
Clinicians have employed an assortment of bevel designs, chamfers, dentinal and enamel grooves, and choices of resin composite materials and techniques for the reattachment of tooth fragments.
实验结果表明,XDA-1型大孔树脂对甘草黄酮的动态吸附率为92.18%,动态解吸率为83.73%,是一种较好的分离甘草黄酮的树脂材料。
The results showed XDA-1 resin was preferable for separating licorice flavonoids with the dynamic adsorption and desorption ratio being 92.18% and 83.73%, respectively.
这个过程只能用特定的材料(塑料,树脂和金属),精度在0.1毫米左右。
The process is possible only with certain materials (plastics, resins and metals) and with a precision of around a tenth of a millimeter.
然后,将织成的布料放入模具,加入树脂使其硬化,于是便制造出这种具有非凡特质的新型材料——碳纤维。
The cloth in turn is then laid over a mold and stiffened with resin to produce a sheet of material with remarkable properties.
因为被称为XPT材料,是一个大约2厘厚米的二氧化硅粒子的薄板,与强大的耐热树脂粘在一起。
XPT, as it is called, is a roughly 2cm-thick sheet of silica particles glued together with a strong, heat-resistant resin.
因为被称为XPT材料,是一个大约2厘厚米的二氧化硅粒子的薄板,与强大的耐热树脂粘在一起。
XPT, as it is called, is a roughly 2cm-thick sheet of silica particles glued together with a strong, heat-resistant resin.
应用推荐