分析了标定模型的可观性，得出了该技术的适用条件。
Observability of the calibration model is analyzed and applicable conditions of the technology are derived.
根据采集数据的特点，采用广义最小二乘法标定模型。
According to the characteristics of data collection, generalized least squares method was used to calibrate model.
建立了数字光栅投影轮廓测量系统的简易标定模型，以实现测量系统的简便化和便携式应用。
A simple calibration model was developed for digital fringe projection profilometry(DFPP) based on absolute phase extraction and space mapping techniques to simplify the measuring system.
对此，本文提出了摄像机标定模型和投影机标定模型，并对使用标定板的注意点进行了说明。
The calibration method includes the camera calibration and project calibration, also the paper mentions some notice when using calibration board.
研究武器系统挂架载荷的动态标定及其数据处理方法，为挂架载荷力值的测量提供标定模型。
To create calibration model for measuring the value of bracket loading, this paper researched the method for weapon system bracket loading dynamic characteristic calibration and data processing.
在研究中，利用BP神经网络理论，提出并建立了按色相角范围对实验数据分类的打印机标定模型。
In the research, based on BP neural network theory, a printer calibration model is provided according to sorting experiment data by hue Angle range.
本文从惯性导航基本方程出发，推导了激光陀螺捷联式惯性导航系统的系统级标定的一种误差标定模型。
In this paper, based on the inertial navigation equation, a novel model for the laser gyro strapdown inertial navigation system is provided.
建立标定模型，用逆向运动学标定方式模拟了一新型五轴并联机床的标定过程，结果表明这种标定方法的算法收敛快、鲁棒性好。
After establishing the model for the calibration of a novel five-axis parallel machine tool, the process of calibration is simulated by minimizing inverse kinematic residuals.
为避免测量过程中在现场设置标定参考点，研究了以基础矩阵估计为基础的交通事故摄影图像自标定模型，并分析了其实现过程。
To avoid sitting reference object on scene, the model of self-calibration based on fundamental matrix estimation and its implementation are proposed.
详细分析了影响高精度光电摄像系统测量精度的各项误差因素，针对这些误差因素提出了详尽的标定算法，建立了摄像系统的标定模型。
This paper analyses the error factors that affect the measurement accuracy in high precision photoelectric camera system, and presents errors calibration method in detail.
从挠性陀螺组合安装误差模型入手，推导出存在轴不对准角情况下的挠性陀螺组合静态误差标定模型，并给出静态误差标定的位置试验方案。
The installation error model of the gyroscope integrated is analyzed, and then error calibration model of flexible gyroscope integrated is deduced when malalignment Angle is considered.
因此，您需要重新标定需要向目标U ML模型添加的更改。
Therefore, you need to re-mark the changes that will be added to the target UML model.
以飞机机翼等大型结构为例，探讨了大型结构部件载荷标定试验的力学模型。
As an example of large sized structural component, the mechanical model of load calibration test of an airplane wing was analysed.
JiBX还允许多个绑定应用于相同的代码，允许使用单一数据模型支持许多模式类型的版本标定变更。
JiBX also allows multiple bindings to be applied to the same code, permitting many types of schema versioning changes to be supported with a single data model.
微软SystemCenter“5”、VisualStudio“10”和BizTalkServer“6”将利用一个仓库技术来管理、版本标定和部署模型。
Microsoft System Center “5”, Visual Studio “10” and BizTalk Server “6” will utilize a repository technology for managing, versioning and deploying models.
本文研究了摄像机模型的标定方法，采用了通过一台摄像机平行移动来模拟两个摄像机的标定方法，达到标定系统参数的目的。
In this paper, we introduce the camera model calibration algorithms and adopt a method of moving a single camera to calibrate parameters of traffic monitoring system.
从定位误差的角度对标定的定位模型进行了试验分析。
The location model calibration experimental results are analyzed from the perspective of error.
实测数据计算结果表明，选优后的误差修正模型可有效提高目标定位精度。
Computation results with flight experiment data indicate that the error correction models effectively increase rocket positioning accuracy after optimization.
线性(小孔)模型摄像机自标定，目前已成为计算机视觉领域的研究热点之一。
Self calibration of a camera with a linear model (hereafter called a linear camera) has become one of the major research directions in computer vision field.
由于实际道路上驾驶员信息的获取困难，建立的车辆跟驰模型难以标定或验证。
Because of the difficult on collection of open road information, car-following models couldn't not be calibrated or validated easily.
对于由全景视觉系统采集到的全景图像，本文采用对光线不敏感的HSI颜色模型进行颜色标定，利用游程编码进行图像分割，并在此基础上进行球、球门、角柱和白线的特征提取。
The HSI color model is not sensitive to light, so we can use it for color calibration, image segmentation by run-length code, and objection recognition to the ball, goal, and the white lines.
并对模型数据搜集和处理、模型的标定以及适应性进行分析。
And then it analyzes the data processing, calibrates the model by using the Logistic regression method, and evaluates model applicability.
最后还简要介绍了几种非透视模型下的摄像机自标定方法。
In the end, we also give a brief review of self-calibration techniques under other camera models.
标定了模型的几何、物理参数。
The geometrical and physical parameters of the network model are calibrated.
其次运用极大似然估计方法对模型的参数进行标定。
And then the model parameters are estimated by means of MLE (maximum likelihood estimation).
最后结合双目视觉标定的模型对目标进行定位。
Finally, according to the binocular vision calibration model, the object's location is obtained.
首先介绍摄像机的透视投影模型，并讲述了普通摄像机标定的方法和两种平面模板的标定方法。
The next topic is camera calibration and we give an ordinary way to calibrate and two calibration method of using one model plane.
模型不但可以用于ECU控制参数的在线标定，经简化后还可以用于复杂控制策略的开发。
The model can not only be used in parameter demarcation for ECU, but also in the development of complicated control strategies.
并对摄像机参数标定过程中的畸变模型进行分析，主要分析了透镜的径向和切向畸变分量。
The distortion model in process of camera calibration is analyzed, and the distortion is decomposed to the radial and tangential distortion.
并对摄像机参数标定过程中的畸变模型进行分析，主要分析了透镜的径向和切向畸变分量。
The distortion model in process of camera calibration is analyzed, and the distortion is decomposed to the radial and tangential distortion.
应用推荐