本发明主要部件采用自行车标准件和标准钢管，现有自行车制造厂均能生产。
The main parts of the electric bicycle adopt the standard bicycle parts and standard steel pipes and the electric bicycle can be manufactured by the existing bicycle manufacturers.
此不锈钢管道工程已完成，以高标准测试检验过了。
The stainless steel pipework has been constructed, tested, and inspected to very high standards.
支撑整个标识的支架是标准配置的钢管，上过油漆，这样能让建筑上的黑色看起来协调一点。
The support structure to hold the sign up was custom fabricated from steel tubing and painted to match the dark trim of the building.
钢管和管件有两种标准端部型式，即：法兰和丝扣。
Two types of end are standard on steel pipes and fittings, that is flanged and screwed.
钢管和管件有两种标准端部型式，即：法兰和丝扣。 。
Two types of end are standard on steel pipes and fittings, that is flanged and screwed.
本文对无缝钢管标识规定因国标与石化行业标准要求不一致，造成工程建设中的争议情况进行探讨。
The provision of the seamless steel tube mark is disaccord in the national standard and the petrochemical industry standard, this paper discusses the controversial question in the construction.
内螺纹槽超深的钢管不符合相关质量标准，但生产厂却难以检测出内螺纹超深的钢管。
The manufacturers find it difficult to detect the steel pipes with extra deep internal thread groove if they do not meet the relative quality standards.
所有AWWA钢管涂层标准都按照饮用水的最高温度指定，但是业主仍需要咨询厂家的涂层条件和限制。
All AWWA steel pipe coating standards are based on the maximum service temperature of potable water. The purchaser shall consult the coating manufacturer for conditions and limitations.
该系列油缸的缸体采用国际标准优质的无缝钢管制成。
The fuel tank of the cylinder series of international standards of quality made of seamless steel tubes.
用澳大利亚标准AS4100- 1900计算薄壁钢管的强度最为准确。
The Australian standard AS4100-1900 is the most accurate to calculate the thin wall steel tube strength.
推荐的标准和规范是钢管必须达到某些或全部要求所制定的技术依据和验收准则。
Recemmended specification and standard is defined as the technical basis and acceptance On which part or whole requirements on products shall be fulfilled to ensure its serviceability.
介绍了目前中国、欧美和俄罗斯常用油气输送钢管标准的使用情况及其发展趋势。
This article introduces the using condition and developing trend of common standards of steel pipe used for petroleum and nature gas transmission in China, Euramerica and Russia.
钢管和管件有两种标准端部型式，即：法兰和丝扣。
Two types of end are standard on steel pipes and fittings that is flanged and screwed.
介绍了钢管衬塑的设备性能、工艺参数、质量标准，以及生产过程中常见的质量问题，并提出了相应的解决方法。
It introduce equipment properties, procedure parameters and quality standards, as well as familiar quality problems during production. It all gives solving methods for these problems.
待涂层固化当前，要应用缺陷检测器在涂料技术标准中规定的电压下对钢管进行检测。
After the coating solidifying, the pipe test should be done with defect detector under the specified voltage.
叙述了涡流探伤基本原理，分析了国内外锅炉钢管涡流探伤验收标准，提出了锅炉钢管涡流探伤验收等级标准。
This article describes the basic principles of eddy current test and analyzes the acceptance standards of eddy current test for boiler tubes at home and abroad.
本标准适用于机械结构、一般工程结构用无缝钢管。
This standard applies to rigid structure, average project construction to use seamless steel tube.
床面，床架、床脚全部采用冷扎钢板，冷扎钢管制造，并经二度磷化后喷涂，品质达到国家级标准。
Material: Bedbody, Bedframe, Bedleg full use of cold rolling steel plate, cold rolling steel pipe manufacture, and the second phosphating after spraying, to achieve national quality standards.
本标准与EN 10297- 1：20 03《用于机械和一般工程用途的无缝钢管交货技术条件》的一致性程度为非等效。
This standard and en 10297-1:2003 "the condition of technology of delivery of seamless steel tube that is used at machinery and average project utility" consistency degree is blame equivalent.
阐述了湖南衡阳钢管集团有限公司企业标准化工作在企业生产、经营、管理等活动中的作用；
Expounds the role of enterprise standardization in enterprise production and management in Hunan Hengyang Steel Tube (group) Co.
钢管或电缆布线均可。符合GB12476,IEC61241标准要求。
Suitable for steel pipe and cable wiring. Suitable for GB12476, IEC61241 standard request.
钢管或电缆布线均可。符合GB,IEC标准要求。
Suitable for steel pipe and cable wiring. Suitable for GB, IEC standard request.
第一，不锈钢管材是不是契合国家标准。
并对管状织物、纺织内衬软管与纺织内衬钢管的基本性能进行了测试，测试结果表明产品符合美国材料和试验协会标准。
In order to simplify the conformation and transform of complex weaves matrix, this paper described a new method of conforming tubular weaves by using MatLab program.
钢管要符合纵向标准的要求。
The steel pipe must be according to specification of longitudinal.
深入探讨钢管专业标准化工作的重点任务、领域及重点项目。
Main tasks, fields, and key projects of steel pipe standardization were deeply discussed.
将结束中国建筑用不锈钢管标准引用不规范的历史；
Will end China building stainless steel tube standard reference not norm of history;
本文介绍了一个测试程序，进行了钢筋混凝土(RC)梁钢管混凝土(CFST)柱平面框架下iso- 834标准火灾。
This paper describes a test program carried out on reinforced concrete (rc) beam to concrete filled steel tubular (CFST) column planar frames under ISO-834 standard fire.
允强及彰源公司都是专业的不锈钢钢管制造商，产品质量符合CNS,JIS及ASTM等国家规范标准。
YEUN CHYANG and FROCH are specialized manufacturer for stainless steel tube and pipe. Products are in conformity with CNS, JIS and ASTM standards.
允强及彰源公司都是专业的不锈钢钢管制造商，产品质量符合CNS,JIS及ASTM等国家规范标准。
YEUN CHYANG and FROCH are specialized manufacturer for stainless steel tube and pipe. Products are in conformity with CNS, JIS and ASTM standards.
应用推荐