复合材料的耐磨性相对于铸铁标准试样提高了2.89倍。
The wear resistance of the composite is 2.89 times higher than the cast iron standard sample.
研究了钛及钛合金的气体标准试样制备工艺和数据处理方案。
The preparation procedure and data processing program of gas standard samples for titanium and titanium alloys.
冶炼出的钢锭经过轧制，并进行热处理，加工成力学性能标准试样。
The steel is processed into standard samples for mechanical properties testing after rolling and heat treatment.
对标准试样和辅助小尺寸试样与冲击功之间的变化规律进行了试验和研究。
The rule of the impact energy was researched between standard samples and aided small samples.
任何与标准偏离的因素都会影响试样的松弛性能。
Any factors deviating from standard may affect the relaxation property of sample.
本文采用标准光滑圆柱试样，研究了35钢在扭转载荷下的屈服过程以及屈服机理。
The yield procedure and mechanics of steel 35 under torsional load were studied by standard cylinder specimen in this paper.
该标准规定，所有的试样在经过洗涤程序之前应当干洗，即刷新方法同时包含了干洗和水洗。
The standard requires that all samples shall be dry-cleaned before they undergo the laundering procedure, i. e. , the refurbishing method includes both dry cleaning and washing.
并对人工合成试样及标准钢样进行了分析，从而验证了方法的选择性及可靠程度。
The artificial synthesis sample and the standard steel sample were also analyzed and the selectivity and reliability of the methods were checked.
根据美国石油学会API标准规定，采用管体取样压平试样的屈服强度表征输油管体屈服强度。
API regulates that the yield strength of flatten specimen from pipe body is used to characterized the yield strength of oil pipeline body.
用多试样柔度法测出的常温JIC值与按标准试验测得的值吻合得很好。
The value of JIC measured by multiple-sample flexibility method is similar to that by standard test.
提高了分析的精密度和准确度，测试催化柴油试样的氧化安定性的结果达到了标准要求。
Analytical precision and accuracy were increased and analytical results of catalytic diesel oxidation stability reached the standard.
结果表明：该磨性能稳定，试样在粉碎过程中无水分损失，测定结果符合ISO712推荐标准方法的要求。
The results showed that the property of the mill was stable, the tested grain had no moisture losses. The determining results were in accord with ISO712 standard.
根据辐照监督管的特定形状，设计了半圆形非标准拉伸试样。
According to the special shape of the irradiation monitoring pipe, the semicircle-shaped tensile samples are designed.
介绍了设计孔径伸长率法的基本原理和其试样的制备及标准化。
The design principle of this aperture elongation method, and preparation and standardization of samples are introduced.
测色前将纺织试样调节到标准温、湿度很重要。
Conditioning textile samples to a standard temperature and moisture content is critical prior to color measurement.
目前，根据国家标准或国际标准研制的矫顽力测量仪器主要是针对软磁试样的。
At present, most coercivity measurement devices designed by national or international criterion are used for soft magnetic samples.
试样应当横向取，如果必要，尺寸可以低于标准要求。试样应当从与发运材料一同热处理的圆盘中取样。
The specimen shall be transverse, using dimensions less than standard if necessary, and shall be prepared from a wafer heat treated with the material to be delivered.
印制板试样必须经过MIL—P—55110标准浮焊试验，然后对金属化孔进行剖视。
PWB samples were subjected to the solder float test per MIL-P-55110 and then the PTHs were cross-sectioned.
本标准规定了极不敏感引爆物质的子弹撞击试验的方法原理、试验设备、试样准备、试验步骤和结果表示。
This standard set extremely not sensitive measure of equipment of the methodological principle that detonates corporeal bullet to strike a test, test, sample preparation, trial and result express.
并随同试样分析了美国标准局1577-小牛肝标准物，由标准物的测定值与其真值的偏离即能反映试样测定值与真值的差离程度。
The standard material of calf's liver(NBS-1577) is analysed by above procedures too and the analytical results were compared with reference values of the standard material.
根据辐照监督管的特定形状，设计了半圆形非标准拉伸试样。
According to the special shape of the irradiation monitoring pipe, the semicircle shaped tensile samples are designed.
显示的价值以实验室测试样品的尝试为基础而且表现数据哪一为天然的材料标准类型的财产里面的秋天。
Values shown are based on testing of laboratory test specimens and represent data that fall within the standard range of properties for natural material.
测试样需用起球评级视镜、灯箱或类似箱内与标准起球图片比较评级。
Test samples required Pilling rating endoscopy, bollards, or similar box with the ball with the standard picture comparison rating.
设计了铝合金半固态模锻标准拉伸试样模具，采用一模五件。
In the paper, moulds of semi-solid forging standard tensile samples of aluminum alloys are designed, and one set of mould can produce five samples once a time.
采用单一参考测量双向散射分布函数时，要求被测试样与参考标准的入射天顶角必须相同。
When using a single reference to measure the bi-directional scattering distribution function (BSDF), the incident zenith angle of the tested sample must be identical to that of the reference.
采用单一参考测量双向散射分布函数时，要求被测试样与参考标准的入射天顶角必须相同。
When using a single reference to measure the bi-directional scattering distribution function (BSDF), the incident zenith angle of the tested sample must be identical to that of the reference.
应用推荐