用螺纹联接并起紧固作用的零件称为螺纹紧固件。常用的螺纹紧固件有螺栓、双头螺柱、螺钉、螺母、垫圈等。
Parts with threads used for joining and fastening are called screw fasteners. The most widely used components as screw fasteners are bolts, double screw bolts, screws, nuts, washers.
产品包括：螺栓、螺钉、螺柱、U型螺栓、预装配的螺钉和垫片组件以及与预装配组件一样加工的无垫圈产品。
Products included are bolts, screws, studs, U-bolts, preassembled screw and washer assemblies (sems), and products manufactured the same as sems except without washer.
钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
钢柱通过螺栓与埋板连接，校准后进行焊接。
Steel columns are connected via bolts and cast-in plate and will be welded after calibration.
研究了柱加劲肋、螺栓排列、螺栓数目、槽钢宽度和槽钢下伸长度等的影响。
Effects of column stiffeners, bolt arrangement, bolt number, U-steel width and U-steel extended length are studied.
该结构柱包括钢管、缀件、连接板、螺栓、混凝土。
The structure column comprises steel tubes, a studding piece, a connecting plate, a bolt and concrete.
紧固件的表面不连续性。第1部分：一般要求的螺栓，螺钉，螺柱。
Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements.
我公司是一家专业的生产制造压铆紧固件、轴、螺柱，螺丝，螺栓，螺母和螺钉、OEM件、特殊异型车削件的厂家。
Our company is a professional high precision auto-lathe processing manufacturer of clinching fasteners, axes, standoffs, screws, studs, nuts, bolt, OEM parts and special shaped turning parts.
介绍了基于性能的节点设计原则，研究了伸臂桁架与巨型柱连接节点、环带桁架螺栓拼接节点两类典型节点。
Secondly, the design of two typical joint of the mega frame, the joint of outrigger to super-column and the long bolt joint of the belt truss, were checked.
不锈钢螺栓，螺柱型，六角形驱动套节。
目前企业可生产的紧固件产品种类包括各类螺栓、螺钉、螺柱、自锁螺钉、自锁螺母、铆钉、销、垫圈以及其他专用件和异型件，涉及300多个标准。
Our products include all kinds of fasteners, such as bolts, screws, studs, self-locking screws, self-locking nuts, rivets, pins and washers with more than 300 standards, and non-standard parts.
加强螺柱和螺栓拉伸数据表（2124594）列出了加强各种尺寸的螺柱和螺栓时所需的拉伸度。
The stretch data for tightening studs and bolts (2124594) tabulates the stretch required for tighting each size studs and bolts.
本发明适用于对钢柱地脚螺栓强度不够时进行加固。
The reinforcing structure is suitable for carrying out reinforcement when the intensity of the holding down bolt of the steel column is not enough.
它通常包括以下十二类零件：螺栓、螺柱、螺钉、螺母、自攻螺钉、木螺钉、垫圈、挡圈、销、组合件和连接副、焊钉等。
Usually there are 12 categories which are bolt , stud, screw, nut , self tapping screw, wood screw, gasket, retainer ring, pin, composite member, bolting, and soldering lamp.
主营产品：各种紧固件、标准件、螺栓、螺柱、螺丝、螺钉、木螺钉、自攻螺钉、车削螺丝、组合螺丝、螺母、连接件、平垫、挡圈等。
Main products: various kinds of fasteners, standard, bolts, screws, bolts, screws, wood screws, tapping screws, turning the screw, the combination of screws, nuts, fittings, flat mat, ring, etc.
柱片：柱片由经过全自动冲孔、冷弯轧制的立柱及横斜撑通过防松螺栓联结。
Frame: Frame including upright by the automatic-punching, rolling Bracing. That be connected through the pine-bolt connection.
柱片：柱片由经过全自动冲孔、冷弯轧制的立柱及横斜撑通过防松螺栓联结。
Frame: Frame including upright by the automatic-punching, rolling Bracing. That be connected through the pine-bolt connection.
应用推荐