本文研究了简支园板考虑簿膜力影响下的极限强度分析。
This paper deals with the ultimate strength of simple circular slabs in regard to the effect of membrane action.
船体平板强度在船舶结构极限强度分析中起到十分重要的作用。
Strength of ship plates plays a significant role for the ultimate strength analysis of ship structures.
计算表明，本方法可用于大型浮码头动力响应预报及极限强度分析。
It is shown that the method can be employed in the prediction of dynamics response and analysis of extreme strength of VLP.
船体是一个由加筋板格组成的箱形结构，加筋板格的强度计算对于船体结构的极限强度分析极为重要。
A ship's hull is a box girder structure composed of stiffened panels and therefore, strength of stiffened panels plays a significant role for the ultimate strength analysis of ship structures.
本文在多年船体极限强度理论和试验研究工作的基础上，对船体极限强度分析的理论方法进行深入系统的研究。
A systematic study of theoretical methods for predicting ultimate hull girder strength of ships is carried out based on long-time theoretical and experimental work in authors group.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
具有初始缺陷板元的极限强度可靠性分析。
Reliability analysis of ultimate strength of plates with initial impact.
根据某算例，采用极限平衡分析方法，讨论了土体的初始体积含水率、降雨的强度、降雨时间对边坡稳定性的影响程度。
The paper according to a calculating example to use limiting equilibrium analysis discussed soil mass original bulk water content rainfall intensity rainfall time impact extent to slope stability.
对于线性荷载作用下外简支环板，引入统一强度理论，进行了极限荷载分析。
For simply supported annular plate under linear load, the limit load analysis was investigated by applying unified strength theory.
采用俞茂宏统一强度理论对具有圆孔的大薄板材料进行了极限分析，得到了统一解形式。
In this paper, Yu Maohong's unified Strength Theory is used to analyze the ultimate load of a thin plane with a hole and a unified solution is obtained.
本文将拉丁超立方抽样法与条件期望和对偶变数方差减缩技术组合用于分析船体总纵极限强度可靠性。
This paper proposes Latin hypercube sampling combined with variance reduction techniques of conditional expectation and antithetic variates to assess ultimate strength reliability of ship hull girder.
根据试验获得的结果，综合地分析了其极限弯拉强度和弯拉弹性模量；
Based on the testing results, ultimate flexural strength and flexural Young's modulus have been studied.
分析结果再现了矿柱从微破裂产生到宏观裂纹形成、最后产生失稳破坏的全过程，并研究了统计平均强度与极限承载力的关系。
The paper numerically demonstrates the pillar failure process-from micro crack to macro crack to unstable failure and studies the relations between limit load and statistical mean strength.
这些强度的统计参数和标准值可供按概率极限状态设计方法分析煤矸石轻骨料混凝土各基本构件使用或参考。
Every statistical parameter and standard value can be used or consulted in using design method of probability ultimate state to analyse coal gange light aggregate concrete basic products.
采用统一强度理论对楔体进行了极限分析，得到了极限荷载的滑移线解，并讨论了其在岩土工程中的应用。
The paper analyzes the limited load of wedge by unified strength theory, finds its solution in slip line and discusses its application in geotechnical engineering.
本文根据交形等效的原理，提出了无粘结预应力梁极限强度的分析方法。
This article proposed a new analytical method for the ultimate strength of unbonded prestressed concrete beams according to the principle of equivalent deformation.
对由线应力性强化材料制造的薄壁钢箱梁在弯曲极限状态下的强度及有效宽比进行了分析。
In this paper, for the thin walled linear strengthened steel box beam, the strength and valid width ratio of flange is investigated under the condition of elastoplastic limit state.
分析了光源强度噪声对光纤陀螺极限灵敏度的影响。
The influence of light source intensity noise on FOG limited sensitivity is analyzed.
对用套管加强的T型管节点在平面外弯矩作用下的极限强度作了参数化分析。
This paper presents the results of a parametric study to investigate the ultimate strength of sleeve reinforced hollow section T-joints subjected to out-plane bending.
有限元强度折减法可以作为极限平衡分析方法的一种逆过程。
Contact FEM strength reduction method is an inverse process in limiting equilibrium analysis of slope stability.
文末还说明了，利用测定的正交层间剪切强度来分析正交铺设层合板短梁的极限载荷是合适的。
Furthermore, it indicates that it is suitable to analyse the ultimate load of a cross-ply laminated short beam with the measured shear strength of cross-interlamination.
统计分析表明：中间主应力一般可使最大主应力的强度极限增大30%。
The statistical analysis shows that the intermediate main stress can generally make the maximum main stress increase 30%.
采用渐进崩溃法计算船体总纵极限强度，将响应面法与传统可靠性计算方法相结合来进行船体总纵极限强度可靠性分析。
Progressive collapse method is used to calculate ship ultimate hull girder strength and the combination of surface response method and traditional method is utilized to analyse reliability.
笔者对此现象进行了机理分析，并提可一出了相应的极限强度计算模型和应力应变三线性模型。
The distinctive working mechanism of HFRP strengthening columns was analyzed, and an ultimate strength mode and a tri-liner stress-strain model were put forward correspondingly.
对两种不同对接焊缝布置下的船体结构进行疲劳强度和极限承载能力分析。
The fatigue and ultimate strength analysis of hull structure with two different butt-welding lines distribution was researched in this paper.
采用事件树分析法进行风险分析并建立了数学模型，包括火灾模型、有效释放率模型、热强度极限值、危险区域等式四部分。
Accident tree analysis is applied to risk analysis and a mathematical model is established, including fire model, effective release rate model, heat intensity threshold and hazard area equation.
采用俞茂宏统一强度理论分析了厚壁圆筒和厚壁球壳的极限荷载，得出了统一解形式。
This paper presents a new method to calculate the limit load of thick wall cylinder and thick wall spherical shell based on Yus Unified Strength Theory and a Unified solutions are obtained.
运用最大应变能理论和强度极限分析法，对简体、端板等重要部件进行了强度校核。
Used the maximum strain-energy theory and strength limit analytic method to check the important part such as sleeve, end-plate, etc.
本文结合工程实际，在拱坝有限元应力分析方法与强度设计准则、多轴应力强度安全计算、拱坝极限荷载分析理论和方法等方面开展研究。
In this thesis, the FEM stress analysis and strength design criteria, multi-axes strength theory and computation, limit load analysis method of arch DAMS are concerned.
本文对采用线性与非线性抗剪强度的有限元法和极限平衡法分析堆石坝坝坡稳定性进行了比较。
In this paper, stability safety factors of the rockfill dam slope are compared by finite element method and limiting equilibrium method by the use of linear and nonlinear shear strength.
应用推荐