复合材料的界面是影响复合材料结构与性能的关键因素。
The interfacial action plays an important effect to the structure and property of the composite materials.
本文简述了材料结构与性能的关系，表明了材料微观结构分析对相关学科的基础作用和重要性。
The relationship between material structure and properties was described and the importance of microstructure for related subjects was indicated.
树脂传递模塑工艺的固化过程数值模拟有助于化学反应、材料结构与性能的控制，具有重要的科学意义和工程价值。
The numerical simulation of curing processes in resin transfer molding is helpful to control the chemical reaction, material structures and properties.
与传统的建筑材料相比，陶粒混凝土具有导热系数小、重量轻、结构性能好等优点。
Comparing with traditional construction materials, the ceramic grain concrete possesses the advantages of smaller thermal conductivity coefficient, less weighty and better structural performance.
研究了器件功率容量与材料显微结构、性能的关系。
The relations of power capacity of isolator to the material microstructure, properties are studied.
高压对高分子材料的结构与性能有较大的影响。
The structure and property of high molecular materials are effected by high pressure.
这种纤维与环氧树脂复合制备的结构吸波材料具有良好的雷达吸波性能。
The structural radar absorbing materials composed of the fibers and epoxy resin have good radar absorbing properties.
该车性能良好，以尼龙为材料，与钢铝结构的车一样坚固，但重量却减轻了65%。
The fully-working cycle made of nylon is as strong as steel and aluminum but weighs 65% less.
本文介绍了改性双马来酰亚胺树脂的分子结构与性能，及复合材料的模压成型工艺。
This text introduced molecular structure and performance of modified BMI resin, and mould pressing craft of the composite material.
导出炭材料的结构与物理特性对炭材料的嵌锂性能的影响。
The effects of structure and physical properties on electrochemical characteristics of carbon anode were educed.
通过熔融共混的方法制得甘油含量不同的TPS样品，研究了甘油含量对材料的结构与性能产生的影响。
The TPS materials with different glycerol contents were produced by melt blending method. The influences of the glycerol contents on the structure and properties were studied.
根据接线盒盒体的功能、结构与尺寸，进行了材料性能、注射工艺等分析，设计了注射模。
According to the function and structure and dimension of junction box, the material capability and injecting technology were analyzed, the structure of injection mold was designed.
叙述了电火花处理对高分子材料表面结构与性能，以及处理条件对改性效果的影响，电火花引发高分子材料表面接枝改性的新方法。
The effect of corona discharge treatment on the structure and properties of polymer materials as well as the surface graft modification by corona discharge were briefly introduced.
活性粉末混凝土(RPC)作为一种高性能结构材料，与常规混凝土相比，具有超高强度、高韧性、高耐久性等优良特点。
Compared with conventional concrete, Reactive Powder concrete (RPC) possesses excellent properties such as ultra-high strength, high toughness and high durability etc.
分析了铝电解槽阴极结构、材料对电解槽使用寿命、性能方面的影响，简要阐述了我国铝电解技术与世界先进水平的主要差距。
Analysis the influence of properties and lifetime for the materials and structure of cathode, and explain the major gap with worldwide advance stage.
本文对非均质耐热梯度功能材料层间的结构与性能进行了研究。
The study on the structure and property of inter laminated of uneven hot resistant functionally gradient materials is introduced in the paper.
智能气囊采用了智能材料与结构新概念设计，可提高缓冲器的性能。
The performance of the cushioning device is improved by using the intelligent material of the airbag combined with the advanced design concept of structure.
通过溶胀曲线测定、红外光谱分析、复阻抗分析等手段对材料的结构与离子导电性能进行了研究。
Tests of swelling curves, infrared spectra analysis and complex impedance analysis were carried out to understand structure and ionic conductive properties of the samples.
计算结果表明，该喷管出口锥与延伸锥结构是安全的，但考虑到材料性能的波动，安全余量较小，应从设计上保证产品的可靠性。
According to the computed result , the structure of NEEC is safe , but its safety margin is small, so the safety of the product should also be ensured through the design.
以金相学理论基础，金相检测是一种用于研究金属材料内部结构组织与材料性能之间关系的检测技术。
Metallography detection is a technology that studies about the relationship between the structure and the performance of metal material based on the metallographic theory.
在聚合反应挤出过程中，化学热效应显著影响材料体系温度，从而影响反应速率以及高分子材料结构与流变性能。
The chemical calorific effect has a great influence on the temperature, the reaction rate, the polymer material structure and rheological property in reactive extrusion processes for polymerization.
目前，对于这类导电复合材料的气敏响应机理较多的是依据膨胀模型与结晶理论探讨气敏导电性能的变化规律，而从微观结构上探讨不够。
At present we probe into the gas sensing conductive performance based on the swell model and crystal theory, however, the discussion on the microstructure was less reported.
抛光垫的性能主要由抛光垫的材料种类、材料性能、表面结构与状态以及修整参数等决定。
The performances of a polishing pad are determined by the type and properties of pad materials, the surface structure and state as well as the conditioning parameters.
本文对非均质耐热梯度功能材料(FGM)层间的结构与性能进行了研究。
The study on the structure and property of inter laminated of uneven hot resistant functionally gradient materials (FGM) is introduced in the paper.
采用短切玻璃纤维与木粉组合，可以获得力学性能很高，能作为结构材料使用的复合材料。
Composites with high mechanical properties that can be used as structure materials can be obtained by combining wood flour and chopped glass fiber.
作为木质复合材料基体而被广泛使用的脲醛树脂，其结构与性能之间的关系，一直是企业界所关注的焦点。
As a matrix of wood composite, urea-formaldehyde resin has been used extensively, and the relationship between its structure and performance is also one focus for enterprises.
重点综述了它在材料的物理化学性能、结构与组成及材料合成机制与制备等方面的研究现状及最新进展。
The status and latest progress on the study of material are reviewed emphatically, including physicochemical properties, structure & composition, mechanism of synthesis and preparation.
多孔材料以其独特的孔结构和表面性能，在大分子催化、吸附与分离、纳米材料组装及生物化学等众多领域具有广泛的应用前景。
Porous materials have potential applications in catalysis, adsorption, separation, ion exchange and chemical sensing fields because of their unique porous structures and surface performances.
介绍了医用可扩张管道的纤维材料选择与性能，管道的结构设计与编织工艺。
This paper presents the choice and properties of the fiber material used in medical extensible tubing (artificial vascular grafts), its structure design and weaving technology.
本文从非晶态物理的角度，综述了非晶态软磁材料的结构与磁性能的物理基础。
This paper overviews the physical base of the structure and properties of amorphous soft magnetic materials based on amorphous state physics.
应用推荐