介绍了一种用于MEMS薄膜材料力学特性测试的单轴拉伸试验方法。
A uniaxial tensile test method for measuring mechanical properties of MEMS thin film materials is presented.
大多数材料研究论文和文摘，涉及制造和随后材料半成品性能参数的测试，都是试验性质的。
Most of the materials research papers and abstracts surveyed were experimental, involving the fabrication and subsequent performance parameter testing of the fabricated material.
在多次试验和分析的基础上，研制了一种可用于现场测试的工程结构材料疲劳载荷谱实时测定系统。
Based on the many times tests and analyses, a real time system about spot testing fatigue load spectrum of engineering structure materials was studied and developed.
本研究进行了动物试验，材料力学测试和临床应用随访。
The study included animal test, mechanic material test and clinical follow - up.
通过参考文献中对GF/PTFE和PVDF1202T膜材料拉伸试验的测试结果，验证研究所提出方法的适用性。
Finally, testing data of typical architectural membrane materials obtained from literature, GF/PTFE, and PVDF1202T are used to verify the model.
经药物释放动力学的测试和灭菌效果试验表明，该材料具有较长的药物缓释周期和很好的抗菌活性。
The results of experiments of antibiotic release rates and antiseptic studies showed that the material has effective antibiotic activity.
对聚乙二醇交联制备的透明质酸衍生物材料进行流变性能测试，结合高聚物流变性能机理及聚合物分子结构对试验结果进行分析讨论。
The experimentation results were discussed with a test of the rheological properties of hyaluronic acid derivative cross-linked by polyethylene glycol, and a mechanism study of macromolecule rheology.
单纤维段裂试验作为复合材料界面剪切强度的一种测试方法被沿用至今。
The single fiber fragmentation test has been used to determine the interfacial shear strength of composite materials.
结合路面材料现行试验研究方法，介绍了路面材料动态测试系统在道路工程材料研究中的应用价值。
Based on the current experimental studying methods of pavement materials, this paper introduced the application of pavement material Dynamic Test System to highway building materials investigation.
五件样品为三个点的静电弯曲测试，五因为厚度增大(TS)从依照美国材料试验学会D 1037- 96的每董事会被减低。
Five specimens for three-point static bending tests, five for thickness swelling (ts) were cut from each board according to ASTM D1037-96.
化学性能测试：材料的盐雾试验、不锈钢腐蚀试验等。
Chemical property testing: salt spray test of materials, corrosion test of stainless steel.
便携式拉压试验系统能在试验台上满足各种非金属材料试件测试试验的要求。
This kind of test system can meet the requirement of nonmetal material test in the laboratory.
对不同鞋面革、鞋里材料单层和复合试样的透气性及其测试的随机性进行了试验研究。
The air permeability and the randomness of air permeability test of different shoe upper leather, shoe lining single -layer material and compounded samples were studied.
试验表明，路面材料收缩变形测试仪测试性能在准确性和稳定性等方面要优于应变仪。
The testing result indicate that the testing performance of constringency transmutation testing apparatus for pavement material is excel to the strain gauge in the stabilization and precision.
介绍了过滤材料耐疲劳特性的测试实例和试验方法。耐疲劳强度特性在过滤材料的使用期间是非常重要的一项性能。
The actual illustration and testing method of fatigue property of filtration material were presented. The fatigue strength property is very important in the application period for filtration material.
万能材料试验机是检测工程材料力学性能参数的常用测试设备。
Universal material experiment machine is a testing device that is used to test mechanical property parameters of engineering materials.
因此认为巴西试验方法已不适合用于测试岩石类脆性材料的抗拉强度。
Therefore, the Brazilian test is not suitable to measure the tensile strength of rock-like materials.
本文采用理论和试验相结合的方法系统地开发了一套基于PC计算机的材料试验机测试、控制和数据处理系统。
In this paper, a system about material test machine for testing, controlling and data processing is exploited based on PC.
分析了电子引伸计应变测量误差形成的主要原因，以及对金属材料拉伸试验强度测试的影响，介绍了引伸计使用中的一些经验和注意事项。
The main cause of error of strain measurement using electronic extensometer and its effects on the strength measurement in tensile tests of metallic materials was analyzed.
阐述了一种纳米尺度下测试材料显微硬度的试验方法——深度硬度试验法。
This paper presents a micro-hardness testing method, namely depth-hardness testing with nanometer scale.
通过室内砂箱振动台震动模拟试验，测试了不同柔性散粒材料在震动条件下的加速度值，对其减震性能作了一些初步的探讨。
Through vibration simulation test on the room flask vibration table, the acceleration of different flexible dispersed grain material under vibration condition was tested.
文章详细介绍了新型建筑材料可燃性试验仪的研究与生产，以及建筑材料可燃性试验仪的测试原理、结构设计。
The research and manufacture of new type building materials flammability tester were fully introduced, especially the detecting principle and structure design.
方法对七种生物材料分别用MTT比色法和软组织皮下埋植试验进行生物相容性测试。
Methods To use the Subcutaneous Implant Test and the MTT Assay to evaluate the toxicity gtade of seven biomaterials.
采用红外光谱、差热分析、物理力学试验等设备对乘用车助力转向油泵储液罐所选用原材料的结构、耐热性能和物理力学性能进行了表征及测试。
The test results showed that the base of the raw material of the booster steering oil pump stock tank of Fukang car of Shenlong Co.
试验还进行了磨削过程中磨削力的测试和比磨削能的计算，分析了陶瓷材料的去除机理。
Measure the grinding force in grinding process and compute the grinding energy ratio, analyzing the grinding mechanism.
介绍了MTS810陶瓷试验系统的工作原理及其在陶瓷材料各种常温及高温动、静态力学性能测试中的应用。
The principle and features of MTS810 are introduced, and the applications of MTS810 for evaluating mechanical property of ceramics in normal and high temperature environment are discussed.
美国材料试验协会ASTME84 - 01《关于建筑材料表面燃烧特性的标准测试方法》。
ASTM E84-01 Standard Test Method for Surface Burning Characteristics of Building Material.
用WD - 10 A型万能材料试验机和XJ - 4型非金属材料冲击试验机测试义齿基托的挠曲强度和冲击强度。
To use WD-10A all-powerful material test machine and XJ-4 nonmetal material impact instrument to measure flexure strength and impact strength of denture base.
用WD - 10 A型万能材料试验机和XJ - 4型非金属材料冲击试验机测试义齿基托的挠曲强度和冲击强度。
To use WD-10A all-powerful material test machine and XJ-4 nonmetal material impact instrument to measure flexure strength and impact strength of denture base.
应用推荐