该壳元的材料模型为理想塑性。
The material modell of this shell element is an ideal plasticity.
对比试验分析了刚性及柔性材料模型的压力系数。
The coefficient of wind pressure of rigid and flexible material models are tested in contrast.
对比试验分析了刚性及柔性材料模型的压力系数。
The coefficient of wind pressure of rigid and flexible material models...
结合相似材料模型观测结果，验证了所给公式的适用性。
The applicability of the formulae is proved through the observation data from a model made of materials similar to those in field.
本文建立了钢筋混凝土墙板构件平面应力问题的材料模型。
This paper presents the material models for the plane stress problems of R.
选用混凝土的帽形材料模型得到结果略低于经验公式的结果。
It is concluded that reasonable result can be obtained using cap model for concrete.
更加精细的材料模型，结合了详细的镜面模型和专案的实质性。
A more refined material model, combining the ideas of the detailed model of mirrors with the materiality of the project.
利用新的含微孔材料模型对塑性材料局部剪切失稳进行了分析。
By means of a new void - containing material model, analysis of shear localization for plastic materials is carried out.
根据后桥壳液压胀形的特点，选择刚塑性材料模型进行模拟分析。
According to the characteristic of hydroforming for rear axle housing, rigid-plastic material model is elected as tube blank material model process simulation analysis.
相似材料模型实验是研究地下采矿引起的岩层变形情况的重要方法。
The Similar Material Model is usually used to study the deformation of the terrane.
建立了胶合板的材料模型，以研究热压固化过程中材料性能的改变。
Material model of plywood is established to study change of material property in hot-pressing consolidation process.
根据动态材料模型建立并分析了其热加工图，同时观察了变形组织。
Processing map was also established based on the dynamic materials model. The microstructure evolution at different conditions was analyzed.
材料模型参数对板料力学性能的描述精度对回弹预测结果有较大的影响。
The accuracy of mechanical properties of sheet described by material model parameters has great influence on the accuracy prediction of springback.
采用塑性变形理论和刚粘塑性材料模型研究了直流电阻对焊接头的塑性变形。
The joint deformation of DC upset butt welding was studied by using theory of plastic deformation and rigid-viscosity plastic material model.
在此基础上，利用ANSYS有限元软件对上述复合材料模型进行计算分析。
Also, the FEM software ANSYS was employed to calculate the stress and strain fields in the structure.
结果表明选择合适的单元，算法和材料模型可以获得与理论解一致的有限元解。
The results show that with suitable selection of element types, solution algorithms and material models the FEA results consistent with the theoretical solution are obtained.
该含微孔材料模型扩充了孙毅的材料模型，其屈服面由膨胀和运动平移组合而成。
The void - containing material model is based on Sun' s material model. Its yield surface consists of a combination of isotropic expansion and kinematic translation.
ABAQUS软件缺少能良好应用于三维梁单元动力弹塑性分析的混凝土材料模型。
In FEM software ABAQUS, there is no concrete material model that can be well applied to the dynamic elastoplastic analysis of three-dimensional beam element.
通过现场调查、观测及实验室相似材料模型实验，分析了大倾角煤层巷道围岩的变形和破坏特征。
With site investigation and observation as well as similar material model test, the paper analyzes the surrounding rock deformation and failure characteristics of roadways in high pitched seam.
讨论了边坡安全系数在不同材料模型下的定义与具体计算的问题，得到安全系数的一个新的计算方法。
The problem of definition of slope safety factory in different material model and the computation have been discussed, and then get a new method of compute safety factory.
数值分析结果表明，利用磁致伸缩材料模型来解释悬臂铁磁板在横向磁场中的磁弹性屈曲问题是合理的。
The numerical analysis shows that it is reasonable to use magnetostrictive material model to analyze the magnetoelastic buckling of cantilevered ferromagnetic plates in transverse magnetic field.
在塑性硬化强扭理论的基础上，利用双线性材料模型计算了扭杆弹簧第一次强扭过程横截面的应力和应变。
Based on plastic intensifying theory, dual-linearity material model is used to calculate stress and strain on the cross section of a torsion bar spring by FE method.
地震作用下计算机模拟分析的准确性除输入地面运动的因素外，主要取决于分析模型和材料模型的合理性。
Besides the factor of ground motion, the accuracy of the simulation is depended on the rationality of analytic model and material model.
地震作用下计算机模拟分析的准确性除输入地面运动的因素外，主要取决于分析模型和材料模型的合理性。
The accuracy of the analysis of computer simulation is decided by the accuracy of the analysis model and the material model.
在材料模型的基础上，利用DEFORM有限元软件对AZ 31变形镁合金板温拉深笔记本外壳实验做了模拟。
In the base of the flow stress model of AZ31, finite element analysis software DEFORM was used to research the drawing of the notebook PC case with magnesium alloy AZ31 sheet.
考虑温度对金属材料热物理性能的影响 ，建立了地铁制动电阻片的材料模型及非线性瞬态温度场的有限元分析模型。
To effectively predict the thermal distribution of the pavement, the numerical model of nonlinear transient thermal field for the asphalt pavement was established based on heat conduction theory.
在建立有限元模型时要注意材料模型、网格划分、边界条件、切屑分离准则等方面，因为这些直接将影响模拟计算的精度。
Pay attention to the material model, meshing, boundary condition, and chip separation criterion of the model, which can affect calculation precision directly.
利用LS - DYNA程序的用户自定义材料模型开发并实现了模型算法，并用有关混凝土侵彻试验结果对模型参数进行了标定。
The model is implemented through a user defined material model in LS-DYNA. The model parameters are calibrated and validated by the data from related concrete penetration tests.
基于ANSYS/LS-DYNA的聚能装药侵彻仿真时，药型罩材料模型的选择有多种，但仿真结果之间的差别多大，有待研究。
When carry out simulation of shaped charge penetration that based on ANSYS/LS-DYNA, many kinds of material model of the liner can be used, but the difference between them need to be studied.
基于ANSYS/LS-DYNA的聚能装药侵彻仿真时，药型罩材料模型的选择有多种，但仿真结果之间的差别多大，有待研究。
When carry out simulation of shaped charge penetration that based on ANSYS/LS-DYNA, many kinds of material model of the liner can be used, but the difference between them need to be studied.
应用推荐