路面各层材料应力应变关系符合幂硬化规律且层间光滑接触。
The stress-strain relations of the materials used in the three layers are assumed as a power function and the contacts between layers are smooth.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
结果表明，在扩展强度发挥面上，这几种材料的应力比与应变增量比之间仍具有线性关系。
The results indicate that the relationship between stress ratio and strain incremental ratio in these materials is still a linear relation on the extended moblized plane.
计算中分别采用了三种本构模型模拟堰体材料的应力应变关系。
Three constitutive models were employed to simulate the stress-strain relationships of the filled materials in the cofferdam.
在材料应力-应变关系的层次上，进行了高层钢筋混凝土结构的弹塑性时程分析。
Based on the stress-strain relation of the materials, study on nonlinear time-history analysis for tall reinforced concrete structure is carried out.
之间的关系，应力和应变是线性的，由有关的弹性模量对束材料。
The relationship between stress and strain is linear, related by the Elastic Modulus of the beam material.
根据散体材料桩复合地基荷载传递及变形机理，分析了散体材料桩与桩间土之间的应力应变关系。
Based on the mechanism of load transfer and deformation of discrete material piles, the relationship between stress and strain of pile and soil is analyzed.
对加卸载循环的应力-应变曲线，建立了能作理论拟合计算的材料宏观本构理论模型和关系方程。
Proposed a macroscopic constitutive model and relative equations which can be used to simulate theoretically measured stress-strain curves of loading -and unloading cycle.
根据高分子材料中三维应力应变关系建立了三维传递矩阵数学模型，模拟梯度聚氨酯在不同入射角下的吸声性能。
A three-dimensional transfer matrix model was presented to simulate the sound absorption coefficients of the graded polyurethanes based on relation of stress and strain of polymers.
研究结果表明：特别是在较高平均应变率下，应变率历史对试件材料的应力应变曲线有明显的影响，在材料动态本构关系研究中应当考虑应变率历史的影响。
The results show that the stress-strain curves are significantly affected by the strain rate history, and this effect must be accounted for in the study of material constitutive relations.
还实际测试了两种国产泡沫塑料材料的静态应力应变关系，根据上述原则和实测数据建立了泡沫塑料包装衬垫的非线性弹性模型并拟合了模型参数。
The sta- tic relation between stress and strain of two kinds of foamed plastics material made in China are measured. The nonlinear elastic models of foamed …
当材料的应力应变关系为弱硬化型时，应力比与应变增量比关系为两段斜率不同的直线；
When the stree strain relationship is the weak hardening, the relationship between stress ratio and strain incremental ratio shows the straight line with two different slopes.
对于加筋土，应用有限元法可以有效地分析土与加筋材料间的相互作用及加筋材料本身的应力应变关系。
For the reinforcing soil, the soil and reinforcing materials interaction and the load-deflection relationship of the reinforcing materials can be described very well by using finite-element method.
使用者只需输入纤维材料的单轴应力应变关系，符合参数输入客观性和易操作性的要求；
Users do nothing but inputting material uniaxial stress-strain relation, which conforms to the demand of objectivity and handiness of parameter input;
基于材料的各向同性理论，根据应力—应变增量关系，建立了一个混凝土的三维本构关系模型。
The 3d constitutive relationship of concrete model is based on the isotropic approach of material with stress strain increment relationship.
根据复合材料平均应力与应变关系，获得了预测有效轴向模量的形式简单的代数方程。
Further a group of algebraic equations to predict effective longitudinal shear modulus of multiphase fiber composites were obtained by virtue of the averaged stress strain theorem.
金属材料韧性的丧失可以通过核查低温时的应力—应变的关系观测。
The loss of metal toughness can be observed by checking stress - strain relations at low temperature.
对结构材料与压电陶瓷传感器的应力应变传递关系进行了研究。
The strain transfer factor, k , is proposed for the characterization of the deformation transfer from the material measured to the sensor.
本文用直接外加法向应力和用力矩板手加应力两种方法测量在不同压力下压电换能器材料的应力与应变关系。
In this work, the direct normal stress and the stress produced with torque wrench were applied on such transducers.
高温下的材料流动应力通常是应变总量、温度和应变速率的函数，考虑这三个因素对流动应力的影响，建立了高温硬化材料的弹塑性本构关系矩。
The present work takes account of the above influence factors on the flow stress and derives a constitutive matrix for the hot deforming materials.
研究主要考虑短纤维长径比的变化对复合材料的应力传递、弹性模量以及应力应变关系曲线的影响。
The studies are focused on the stress transfer, elastic modulus and stress strain curve of the composite.
结果表明，复合材料在高温下的流变应力较低，峰值应力与变形温度、应变速率之间的关系在低应力区符合指数关系。
The results show that, the flow stress of SiCP/AZ61 composite is low, the relationship between peak stress and temperature or strain rate is exponential relationship.
结果表明，复合材料在高温下的流变应力较低，峰值应力与变形温度、应变速率之间的关系在低应力区符合指数关系。
The results show that, the flow stress of SiCP/AZ61 composite is low, the relationship between peak stress and temperature or strain rate is exponential relationship.
应用推荐