核心服务将提供材料可靠性鉴别。
The core services will provide Positive Material Identification.
它毕竟是一个简单的球窝关节；它有一定的载荷；它在有限的生命中需要可靠性；它必须包含适合工作环境的材料。
It is after all a simple ball and socket joint; it has certain loads imposed on it; it needs reliability over a defined life; it must contain materials suitable for the working environment.
应当记住，新材料的性能和可靠性很少像现有材料那样为人们所了解。
Must remember that, the new material performance and the reliable very few pictures materials on hand such understood for the people.
新型复合材料的出现是宇航业实现高性能、高邮可靠性、低成本的基础保证。
The appearance of new composite material is the fundamental assurance of high performance, high reliability and low cost for aerospace industry.
选用优质康铜材料，传统工艺，可靠性强。
Constantan use high-quality materials, traditional crafts, and reliability.
战神一号上使用了轻型复合材料，装有性能更好的引擎以及大大改善的电脑系统，从而获得更好的可靠性和动力。
The Ares 1 is a worthy descendant of their rockets and others, with lightweight composites, better engines and exponentially improved computers giving it more reliability and power.
采用稀土永磁材料的发电机在可靠性及效率上优于普通发电机，体积重量也相匹敌。
The principle advantage of the REPM (rare -earth permanent magnet) generator over the common one is high efficiency and high reliability, and the weight between them is approximately equal.
最后，应用概率断裂力学方法(PFMA)，对含初始裂纹体的直升机金属材料(铝合金)构件的疲劳裂纹扩展寿命进行可靠性分析。
Finally, applying Probabilistic Fracture Mechanics Approach (PFMA), the reliability analysis is carried out for helicopter metal material (aluminum alloy) structure having initial cracks.
应用蒙特卡罗模拟方法，考虑材料参数和荷载的变异性，对混凝土重力坝强度和稳定性的可靠性分别进行了研究。
Considering the material parameters and the load changeability, the reliability of intensity and stability for the concrete gravity dam is researched with the method of Monte Carlo simulation.
诸如现代性和可靠性等品质，在对门窗细致严谨的设计、材料的选择和亮色的选用中充分彰显。
These qualities, as the modern and reassuring aspect, are obtained due to the rigour of the bay design, the choice of the materials and the use of bright colours.
而国内、外的齿轮材料在许多方面都存在一定的差异，以致影响齿轮设计的可靠性。
But difference exists for domestic and overseas gears material in many aspects so as to affect the reliability of gear design.
可大大提高承击砧的材料利用率，以及设备的可靠性和有效性。
Can greatly improve the anvil bearing material utilization, struck the reliability and validity and equipment.
材料的生产工艺、检验、选材、贮存和使用等环节都存在着影响质量和可靠性的因素。
There are many factors to effect the quality and reliability in the links in production process, inspection, selecting, storage and use for materials.
其运行的可靠性很大程度上取决于耐火材料的稳定性。
The operating reliability will depend on the stability of refractory material significantly.
以三峡库区巴东赵树岭滑坡原型为背景，采用岩石相似材料模型试验方法对这两种方法的可靠性进行了验证。
In this paper, the reliability of the two methods is validated through rock similar material modeling test on the background of Zhaoshuling landslide of Badong in the Three Gorges Reservoir area.
通过现场试验，以硬度计检测复检确认了金属材料分选仪的可靠性，并进行靶场退壳试验。
Through field test, the reliability of metal material separation is affirmed by sclerometer testing repetition measurement. Moreover, ejection experiments are made in shooting range.
并可改善陶瓷材料的性能，提高其使用可靠性。
They can also improve the behavior and increase the application reliability of ceramic materials.
介绍了镐形齿的几何形状、材料、工艺及截齿的配置等情况，并对其可靠性及寿命进行了分析。
The geometry, material, processing and arrangement of pick are introduced, and the reliability and the life are analyzed.
该系统具有控制精确、功能齐全、可靠性高等特点，适用于包装机械中材料供给控制。
It has characteristics such as higher control accuracy, reliability and versatile etc. It is fit for the material drive of packing machines.
通过正确地选择波纹管制作材料和结构、合理设计波形参数和疲劳寿命、保证安装质量等措施，可提高波纹管补偿器的安全可靠性。
This paper sates that selecting bellows material correctly, designing waveform parameter and fatigue life, ensuring installation quality can improve the safety and reliability of bellows compensator.
本文讨论了材料退化失效的基本概念，给出了微观结构随机演化的动力学方程，统一导出了失效几率，可靠性、失效几率密度、失效率和平均寿命。
Some key concepts in degradated failure of materials is discussed. The stochastic evolution equation of defect clusters is given and the failure probability reliability and failure rate are derived.
用金属材料制成的一体化可动结构和叠层式压电元件可组成蛇型步进式直线驱动器，能实现高精度、高可靠性的直线步进驱动。
The snake-step linear actuator is constructed based on the integrated moving structure made by metal and the stack PZT, it can achieve the line-step moving of high accuracy and high reliability.
经优化设计和可靠性计算后的结构，既可以节约材料成本，又能满足实际工程的需要，并且有利于现场施工。
Structure deigned with optimization and reliability Calculation, can not only save material costs and meet the practical engineering needs, but also conducive to on-site construction.
基于MEMS的测试技术主要有MEMS材料特性测试技术、MEMS动态特性测试技术、MEMS可靠性测试技术等方面。
Testing technique based on MEMS mainly includes testing technique of material characterization, dynamic characterization and reliability characterization.
在解决材料及电子产品可靠性的同时，无铅产品需要开创我国自己的品牌。
At the time of dealing with materials selection and product reliability, it is necessary to create our Chinese brands of...
公司采用最先进、可靠的防火阻燃材料及最新的技术配方，从而保证产品的安全、可靠性。
Companies use the most advanced and reliable fire retardant materials and the latest technology formula, thereby ensuring product safety and reliability.
研究结果为中国长寿命卫星胶接结构、材料的寿命可靠性提供了相关依据，展现了纳米材料空间应用的前景。
The results offer the foundation of bonding structure and material life reliability on long-life satellite in our country, emerge the prospect of nano-material using in the space.
本文从结构工程的安全可靠性、耐久性和经济性三方面说明纤维复合材料在基础设施工程领域有广阔的应用前景。
From three aspects of the structure safety creditability, durability and economics, this paper presents the prosperous application future of fiber composite material used in infrastructure field.
根据均匀设计原理，对碳纤维增强铜基复合材料的磨损试验参数予以科学排列，不仅减少了试验次数，而且提高了试验数据统计结果的可靠性。
The friction and wear tests of the self lubricating bearing made of carbon fiber reinforced copper matrix composite materials are arranged by uniform design that can greatly reduce the test duration.
在石油企业安全生产过程中，人的可靠性是保证安全生产的关键，机械设备、原材料的质量可靠性是安全生产的基础。
In safe production of oil enterprises, human reliability is the key to safe production while quality reliability of machinery equipment and raw materials is the basis of safe production.
应用推荐