卡西尼号远离土星环而观察到的每个信号的变化提供了一份环材料分布的侧写。这是一个距土星距离的函数，或是一个光学深度剖面。
The observed changeof each signal as Cassini moved behind the rings provided a profile ofthe distribution of ring material as a function of distance fromSaturn, or an optical depth profile.
但是，所有这个材料，这些横截面被测量的，是以能量的函数，它们是测量，中子能量的函数，那也是特定的媒介的，温度的函数。
But all this stuff, these cross sections are measured as a function of energy, they're measure as a function of the neutron energy which is a function of the temperature of the particular medium.
产出函数建立了产出的总量或规模与各种投入(比如人力、材料、设备)之间的关系。
A production function relates the amount or volume of output to the various inputs of labor, material and equipment.
压电结合材料问题的求解，可以归结为寻找合适的调和函数。
The solution of the problem for the bonded piezoelectric materials can be summed up to find the appropriate harmonic function.
在这标准材料之后，作者前进给省略功能和给最全部包括一的味道这个领域的美丽结果的省略模函数。
After this standard material, the authors step forward to elliptic functions and to elliptic modular functions including a taste of all most beautiful results of this field.
本论文根据制备梯度功能材料成分分布的非线性理论，计算出聚氨酯在混合树脂中体积比的分布函数。
According to the non-linear theory of composition of the graded function materials distribution, the volume content function of polyurethane in the mixed resin was achieved.
对于线粘弹性裂纹体，当外应力是常数时，各位移分量均是时间相依的，且是材料流变常数的函数。
For linear viscoelastic cracked bodies, when the applied stresses are constant, the displacement components are time dependent and are functions of rheological constants of materials.
对这些曲线的分析导致结论：材料破坏时的损伤是所加应力的递减函数。
The analysis of these curves leads to a conclusion that the material damage at rupture is monotonically decreasing function of applied stress.
双向反射分布函数(BRDF)有效地描述了材料表面的空间反射特性和光谱特性。
The spatial reflected characteristic and spectral characteristic from optical material surfaces were effectively described by the BRDF (Bi-directional Reflectance Distribution Function).
这种热残余应力可以表示为纤维、基体材料性质以及纤维束几何参数的函数。
The thermal residual stresses can be indicated as a function of the properties of fibers and matrix materials and geometry of twisted fiber bundle.
复变函数论的方法，对复合材料的圆盘状裂纹的轴对称性扩展问题进行研究。
By the theory of complex functions, a penny-shaped crack on axially symmetric propagating problems for composite materials was studied.
论文以材料费用为目标函数，铁心长度及绕组匝数为变量编制了计算程序，对单相电机进行了优化设计并给出了计算结。
It selects material cost as target function, core length and winding turns as variables to develop program for optimization design of single phase motors.
利用多晶材料织构取向分布函数（ODF）对单晶性质进行加权平均可有效预估其宏观磁性各向异性。
The magnetic anisotropy of polycrystalline materials can be predicted by averaging the properties of monocrystals weighted by using orientation distribution function (ODF).
正确认识粉末烧结材料屈服函数形状和性质，对于其塑性变形分析有重要意义。
It is important to plastic deformation analysis for we to understand correctly the geometrical form and properties of yield function of sintered powder materials.
从理论和实验上研究了材料功函数对场致发射稳定性的影响。
This paper discusses experimentally and theoretically the influence of work function on the field emission stability for ta top.
本文提出了将泛环境函数法应用于建筑材料的“绿色度”评价。
It is proposed to apply a pan-environmental function method to the evaluation for "green degree" of the building material.
与自由水不同，含湿多孔材料中孔隙水的冻结点是温度和液态水含量的函数。
Different from bulk water, the freezing points of the pore water in a moist porous material is a function of temperature and liquid water con - tent.
材料的疲劳损伤是一非稳态过程，难以用传统的数学函数准确表达。
The fatigue damage of materials is an unsteady process and is difficult to be expressed accurately by the use of traditional mathematical functions.
材料的松驰模量可以表示为交联度的线性函数。
The relaxation modulus of the material can be taken as a linear function of cross linking density.
复变函数方法是研究复合材料断裂问题的非常有效的数学方法之一。
The method of composite complex function is one of the mathematical methods for the problem composite material fracture.
本文给出了正交异性材料反平面间题波动方程的函数不变解。
In this paper the functionally invariant solution of the wave equation of anti-plane problems in the orthotropic material is obtained.
利用复变函数方法，对复合材料平面断裂问题的研究已经取得了许多成果。
Many research results of composite material fracture were derived by the method of composite complex function.
考虑到放电等离子烧结的一步成形工艺，将粉末材料的热电性能参数假设为温度和密度的双变量函数。
Considering the single step processing technique of SPS, the thermal-electrical properties parameters of powder material were assumed as bivariate functions of temperature and the relative density.
利用一种新的橡胶材料应变能函数，对橡胶楔体与刚性缺口接触大变形问题进行了分析。
A new strain energy function is used to analyze a rubber wedge contacting with a rigid notch.
利用一种新的橡胶材料应变能函数，对橡胶楔体与刚性缺口接触大变形问题进行了分析。
A new strain energy function was used to analyze a rubber wedge contact with a rigid notch.
在小弹塑性变形范围内，首先将应力写成应变的奇次四项式的幂函数形式。使其相当精确地拟合材料的拉伸曲线。
This paper presents the odd function with four terms which can be used to make the curve fitting of the stress-strain for various materials precisely.
利用积分变换方法得出了两相材料中作用简谐集中力时的格林函数。
By using Fourier transform method, the Green function of a point harmonic force applied at a bi-material plane is obtained.
密钥派生函数 （KDF）然后使用此机密协议，并生成密钥材料作为输出。
The key derivation function (KDF) then takes the secret agreement and produces the key material as output.
铁电材料作为一种新型的阴极材料，具有真空要求低、制作简单、功函数低、响应速度快等特点。
The ferroelectric material is a novel cathode material, which is characterized by its low vacuum requirement, convenient fabrication, low work function and fast reactive rate.
本文以幂函数方程，统计分析橡胶树萌动芽种植材料的不同芽长与持水力的关系。
The power function equation was used to analyse the relation between different bud lengths and water-retaining capacity of Hevea planting materials with young sprouts.
应用推荐