在外部低杆的上端连接到一个上杆套。
The upper end of the outer lower rod is connected to an upper rod sleeve.
在调节块外周有一个调节杆套与之接触。
The periphery of the regulating block is provided with a regulating rod sleeve which contacts the regulating block.
在上杆的内下端连接到一个较低的杆套。
The lower end of the inner upper rod is connected to a lower rod sleeve.
该改锥是由锥柄盖、空心锥柄、锥杆、锥杆套、永久磁铁和多个不同规格尺寸的改锥头组成。
It is composed of a taper shank cap, a hollow taper shank, an awl perch, an awl stem casing, a permanent magnet and screwdriver heads of different format dimensions.
一套是一系列的切断停止操纵杆。
尼克拿过来一根螺栓套杆，把一头儿贴在进气歧管上，然后凑过去听了听另外一头儿。
Nick set one end of a long socket extension on the intake manifold and listened to the other end.
其中许多接收器将集中在一个内部 “核心”大约五公里的一片地区，但是一些会被安排一套1500公里长的精致旋转臂（杆）。
Many of the receivers will be concentrated in an inner “core” about 5 kilometres on a side, but some will be arranged into a set of elegant spiral arms 1,500km long.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
The value-opening mechanism includes a valve lifter and a cam on a camshaft .
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
The value-opening mechanism includes a valve lifter and a CAM on a camshaft.
每一套设备都包括有单根可伸缩杆和一个带有单独的空气通道和水喷嘴的驱动机械。
Each device consists of a single, retractable lance and a drive mechanism equipped with separate air and water nozzles.
根据套损实际情况，导向杆下端部可以加工成椭圆形、平面式或笔尖形状，可以堆焊合金或不焊合金。
Based on the actual situation, guide rods can be processed into the bottom of the department of oval, planar, or tip shape, you can not weld surfacing or alloy.
将基于实例推理的方法应用于六杆间歇机构的设计，开发了一套六杆间歇机构综合的专家系统。
In this paper, the method based on case reasoning is applied for the design of six-bar dwell mechanism.
本文提出一套锚杆式挡土墙的实用计算方法，并在实际工程加以应用，取得了良好的技术与经济效果。
A series of calculation method for anchorage retaining wall is proposed, and they are used in practical construction, followed with a perfect technological and economical effects.
结论杆式附着体及双套冠式覆盖义齿是一种理想的修复形式。
Conclusion the bar attachment and the telescopic overdentures are ideal types of prostheses.
文摘：液压转向机对齿条杆部表面有很高的耐磨、储油、封存要求，为此需要一套表面超精加工工艺及加工参数设定。
Abstract: requirements for hydraulic steering rack cylinder are very high the rack cylinder should be durable lubricants preservable and of seal. So finish machining and parameter-set are necessary.
根据对用于镗孔加工刀具补偿的微位移技术的分析以及对柔性铰链机构的研究，研发了一套具有自主知识产权的平行四边形弹性镗杆结构的镗孔刀具微量补偿装置。
Based on the research on micro movement and elastic gemels, a boring cutter micro compensation device amounted on the parallelogram elastic boring rod is developed with self owned intelligence right.
钢杆，钢骨，双金套手柄，色丁布伞面，透明膜包装，晴雨兼用。
Steel pole, steel ribs, golden handle, sadin cloth cover, translucent plastic film packing, both for rainy and sunny use.
提升杆与锥形塞通过丝扣连接，塞盖套在提升杆上并与橡胶套紧密配合；
The cork cover is on the lifting rod and is tightly matched with the rubber sleeve.
建立了一套肘杆机构活动平台加速度测试系统，对MW1050自动烫印模切机空载状态和加压工作状态进行了实测。
A set of acceleration test system of elbow-bar framework is founded for the material test of MW1050 automatic blocking die-cutter while it is load-off or not.
转动内杆具有穿出第二固定座外的传动段及穿出第一固定座外的套置段；
The constant speed rotating unit includes an inner rotating rod and an outer stationary pipe.
转动调节撑杆调节套使升降杆垂直于地面；
To turn the adjusting sleeve, make the mast vertically on the ground.
所述探头穿刺引导仪包括一支架、一柱体、一套环、两个连接杆以及两个夹子。
The probe puncture guiding device comprises a support, a cylinder, a lantern ring, two connecting rods and two clips.
该工装采用主轴带动镗套和镗杆及刀杆的结构来完成球面加工的切削运动，已取得了良好的使用效果。
The technical equipment adopted the construction that the spindle drove boring sleeve, boring bar and cutter bar in order to finish machining spherical surface. The improved result was good.
定速转动单元包括呈转动穿于第一、二固定座并由动力传动单元驱动的转动内杆及套设于转动内杆外的固定外管；
The constant speed transmission structure includes a constant speed rotating unit and a power transmission unit which is arranged inside the secondary stationary seat.
液压转向机对齿条杆部表面有很高的耐磨、储油、封存要求，为此需要一套表面超精加工工艺及加工参数设定。
Requirements for hydraulic steering rack cylinder are very high, the rack cylinder should be durable, lubricants preservable and of seal. So, finish machining and parameter-set are necessary.
建立了一套适合于稠油定向井的杆管柱设计方法。
Established a method to design rod string of heavy oil directional Wells.
本实用新型适用于汽车挂车的扭力杆胶套。
The utility model is suitable for the torsion rod rubber sleeve of the trailer of the automobile.
滴斗盖上设有滴斗盖孔(4)，套杆的支撑部分能在该滴斗盖孔内自由移动。
Dropping bucket cover holes (4) are arranged on the dropping bucket cover, and supporting parts of the sleeve rods can freely move in the dropping bucket cover holes.
滴斗盖上设有滴斗盖孔(4)，套杆的支撑部分能在该滴斗盖孔内自由移动。
Dropping bucket cover holes (4) are arranged on the dropping bucket cover, and supporting parts of the sleeve rods can freely move in the dropping bucket cover holes.
应用推荐