提出一种火电机组负荷多模型鲁棒预见控制方法。
A multi model robust forecast control method is presented for the load control of thermal power plants.
提出一种利用MATLAB工具箱解决机组负荷优化分配的方法。
A new method was introduced to solve the units' optimal load dispatch problem by means of MATLAB toolboxes.
转速降负荷分配转速降负荷分配是两台或多台机组负荷分配的一种方法。
Droop load sharing Droop load sharing is a method of making two or more parallel generator sets share a system kW load.
单元机组负荷系统是具有耦合的两输入两输出多变量系统，具有较大的惯性。
The unit load system is a two-input and two-output multivariable plant with coupling and inertia.
同时软件上增加了机组负荷指令偏置调整和手动功能，分配方式更加多样。
The load bias adjustment and manual functions are added to its software, which enhances the dispatch mode diversity.
通过引入模糊理论提出了电厂机组负荷分配模型，并运用改进的遗传算法进行求解。
A model for the optimization load allocation among power generating units is proposed by using fuzzy theory and solve it with the improved GA.
根据汽轮机阀切换动作原理，延长了阀切换时间，减小阀切换时的机组负荷晃动现象。
According to the valve switching principle, the switching time was prolonged to decrease the unit load hunting.
文章介绍了基于机组负荷指令的协调控制方法，以及有成功使用经验的动态加速信号；
The paper briefs the unit's load command based coordinated control method as well as the dynamic acceleration signal with successful using experience;
着重研究了运行特性方程和应用该方程在机组负荷分配时的经济性进行理论分析和数学推算。
The paper mainly deals with the economic theoretical analysis and mathematical analogy of the operation characteristics as well as the load dispatch of the set when using I...
将该控制器应用于锅炉的单元机组负荷控制系统中，实现了对非线性和大时滞系统的自适应控制。
While the controller is applied to controlling system about unit load of boiler, adaptive control of nonlinear big-lagged system is realized.
本文讨论汽轮机采用功频调节系统时，锅炉-汽轮发电机单元机组负荷反馈控制系统的整定问题。
The problem of tuning of the load feedback control system of boil-turbogenerator unit, as the turbine is equipped with power-frequency control system, is discussed in this paper.
从凝汽机组负荷优化分配的算法出发，在此基础上推导了适用于供热机组的全局寻优法和热化做功系数法。
The global optimization method and thermo-coefficient suitable for heat supply steam turbine sets is deduced according to the optimized method for Condensing steam turbines sets.
为解决循环流化床锅炉发电机组负荷变化时的机炉协调控制问题，需要对发电机组的热功效率进行在线计算。
Online calculation of heat to power output efficiency of thermal generator set is important for the load coordination control in the CFB boiler thermal generator set.
而且，通过三维温度场所获得的总辐射能，建立辐射能信号与机组负荷之间能量平衡的新的协调控制模型，可提高机组负荷控制水平。
A new coordinated control model based on the energy balance between the value of radiative energy signal and the unit load is established, to improve the unit load control.
文章针对单元机组负荷控制的特点，采用最优预见控制（OPC）策略设计了基于多变量预见控制原理的单元机组负荷最优预见控制系统，并讨论了预见步数对控制品质的影响。
This paper designed a multivariable load Optical Preview Control (OPC) system for a thermal power unit, and discussed the effect of preview step number on control performance of the load OPC system.
由于其出色的部分负荷效率，多压缩机机组主要应用于的场合为大排量中高压活塞式空压机应用领域。
Because of its excellent part load efficiency, many compressor unit is used mainly in the occasions for large displacement in high pressure piston compressor applications.
首先利用曲线拟合工具箱拟合机组的煤耗特性曲线进行建模，再使用优化工具箱进行负荷优化分配。
It first builds the model by using curve fitting toolbox to fit the unit input output curves, and then dispatch the load with the aid of optimization toolbox.
在不同负荷、不同季节和不同环境温度下，制冷机组的冷却塔风机恒速运行无法使冷却水温度控制在需要范围内。
The temperature of cooled water could not be maintained in a desired range by a fan running at constant-speed in a cooling tower under different loads and environmental temperatures.
随着负荷的增长，发电机组的规模也在不断的增加。
Along with increases in load growth, there have been continuing in creases in the size of generating units.
实际应用结果表明该系统工作准确可靠，有效地降低了空气预热器的漏风率，为机组的安全满负荷运行提供有力保证。
The practical results show that the proposed control system to can reliable to work and effectively reduce the air leakage ratio, thus guaranteeing the safe and normal running of the units.
对于调峰机组，当负荷变化时机组的过程模型甚至结构参数都具有明显的快时变特性。
For peak load unit, its process model and structure parameters have obviously fast time-varying characteristic while load changing.
此外，母管制机组间的负荷优化分配是母管制电厂运行中常遇到的问题之一。
Furthermore, Load optimizing distribution of main-pipeline unit is one of problems in the running of main-pipeline power plant.
发电机组的故障趋势分析经常受到负荷变化的影响。
The trend analysis of faults in generator sets is often influenced by load variation.
水轮发电机组的负荷控制主要通过对调速器的控制来实现的。
Load regulating of power generator is always finished through the regulating to the regulator.
提出了机组甩负荷试验和RB试验中锅炉侧的具体操作过程、要点等。
This article also suggested that detailed operation process of load rejection test and RB test.
在分析带地区负荷机组转速调节过程的时候，不考虑电气过渡过程是可行的。
As the process of speed regulation of the units with local loads is analyzed, it is feasible to ignore the electric transient process.
同样，大型火电机组的负荷系统是一个多变量非线性动态系统，它的动态特性随工况的变化而大范围变化。
Load system of the large scale power plant's unit as well, is a multi-variable nonlinear dynamic system, and the dynamic characteristic will change with the different operating condition.
同样，大型火电机组的负荷系统是一个多变量非线性动态系统，它的动态特性随工况的变化而大范围变化。
Load system of the large scale power plant's unit as well, is a multi-variable nonlinear dynamic system, and the dynamic characteristic will change with the different operating condition.
应用推荐