介绍了邯钢新区冷轧重卷拉矫机组中自动控制系统的技术特点，分析了该系统的发展趋势和应用前景。
It is introduced the technique characteristic of automatic control system of cold-rolling recoiling drawing-straightening set, its developing trend and application prospect analyzed.
利用IC/5镀膜自动控制仪在现有镀膜机组上镀制出了高性能的高反膜。
The IC/5 deposition controller is applied in the existing coating system, and the high precise high-reflective film is made.
介绍了国华太仓发电有限责任公司600 MW超临界机组全程给水自动控制系统情况。
An introduction to the feed water's whole course automatic control system of Guohua Taichang Power co. Ltd. 's 600 MW supercritical unit is being presented.
随着火电机组容量和参数的提高及热力设备的复杂化，对自动控制系统的要求越来越高。
With the improvement of unit load and parameters of the thermal power plant, and also with the complicating of thermal equipments, automatic control systems are required more and more efficient.
介绍了应用单片机组成的专用新风处理机控制器，能实现高精度温湿度的自动控制。
The dedicated controller for fresh air processor composed of single chip computer is introduced. It controller can offer accurate control for temperature and humidity.
分析了纺丝侧吹风空调机组及送回风系统设计及其自动控制系统配置的节能措施。
The energy saving measures for cross air blow conditioner system were analyzed from the aspects of return air system design and automatic control system configuration.
以约克公司最新的机组为例，介绍风冷螺杆式冷水机组基于微处理器的自动控制方案及流程。
The microprocessor based automatic control methods and flowchart of air cooled screw chiller are described as per York updated products.
在自动控制系统中调节阀的性能不仅直接影响自动化水平，而且也关系到机组的安全和经济运行。
The performance of regulating valves in the automatic control system not only directly effect the automation level, but also has a bearing on the safe and economic operation of generating units.
亚砷酸车间的生产控制采用仪电一体化设计，所有电气设备、机组和阀门均在DCS上自动控制或远方遥控操作。
The production of arsenic trioxide is controlled by electrics and instrument, with all electrical equipment, units and valves automatically controlled by DCS or remote operation.
在电厂机组运行中，其主要辅机故障脱扣，自动控制系统能快速、安全降负荷并稳定机组运行。
In operation process of the power plant, when the trip trouble happened in its main auxiliary units, its automatic control system can lower the load quickly and safely.
介绍了双机架可逆式冷轧机组厚度自动控制系统，该系统由调节装置、测厚仪和测速仪组成。
Automatic gauge control system in double-stand reversing cold mill is introduced. This system is consists of regulating device, thickness gauge and tachometer.
介绍采用单片微机组成的控制系统，实现水压机挤压速度的自动控制。
The paper recommends a control system composed of a micro-computer which controls the velocity of extrusion automatically.
本文主要介绍微型机的单元自动控制装置在分布处理系统中的作用及其硬件结构、软件任务，以及在水电站的水轮发电机组控制中的应用。
This paper describes the function of RTU in the distributed system as well as its hardware construction and software task, and recommends its application to the control of water turbine generators.
扬州润宇风力发电设备有限公司，是一家以风力发电机组和工业及民用自动控制系统为主的高新技术企业。
Run-yu Yangzhou Wind Power Equipment Co. , Ltd. , is a wind turbine and industrial automation and control systems for civilian-oriented high-tech enterprises.
本产品采用氟利昂压缩机组，以F - 12作制冷剂，并装有压力继电器与温度调节器自动控制。是制造汽水、汽酒的配套设备。
The tank contains compressor using freon F-12 as refrigerant, and temperature regulator for automatic controlling. It is necessary equipment for aerated water and sparkling sine production industry.
以开利公司最新的19XR机组为例，介绍离心冷水机组基于微处理器的自动控制方案及流程。供使用维护人员参考。
The microprocessor-based control methods and flowchart of Carrier 19XR centrifugal water chiller are described. It can be a reference to equipment operation and maintenance people.
本文阐述了一个由上下微机组成的温室综合环境自动控制管理系统。
The automatic control management system which is made of epistasy and inferiority microcomputer is discussed.
本产品采用氟利昂压缩机组，以F - 12作制冷剂，并装有压力继电器与温度调节器自动控制。
The tank contains compressor using freon F-12 as refrigerant, and pressure sensor, and temperature regulator for automatic controlling.
在对黑液预处理系统的改进中，根据工艺要求及运行特点，设计了一种利用PLC的自动控制系统，阐述了该系统的总体设计方案及运行机组切换时的自恢复功能实现方法。
When rebuilding the pretreatment system of pulp black liquor, according to the technical regulation and the operating characteristic, a PLC-based automatic control system is developed.
火力发电机组低负荷运行阶段的给水自动调节一直是实现全程给水自动控制的一个难点。
For a thermal power generating set, the automatic adjustment of water supply during operation under low load is always the bottleneck for the realization of full-scale water supply automatic control.
介绍太钢酸洗机组工艺流程，自动控制系统的配置及特点。
To describe the process flow of pickling line in Taiyuan Iron and Steel co and the configuration and features of its automatic control system.
由PLC和上位计算机组成的湿磨机控制系统，实现了系统的自动控制，提高了产品的合格率，降低了操作人员的劳动强度。
The control system composed of PLC and host computer implemented the automatic control of system. It enhanced the product's qualification and reduced the labor of operators.
公司专业从事风力发电机组和工业及民用自动控制系统的研究、开发、制造、及销售。
Companies specializing in wind turbine and industrial automation and control systems for civilian research, development, manufacture, and sale.
论文针对笔者自行开发设计的水源热泵的制热机组，设计可编程控制器PLC和触摸屏hmi自动控制系统。
This paper, designed developed for the author, s source heat pump heating unit, designed PLC programmable controller HMI human machine interface.
论文针对笔者自行开发设计的水源热泵的制热机组，设计可编程控制器PLC和触摸屏hmi自动控制系统。
This paper, designed developed for the author, s source heat pump heating unit, designed PLC programmable controller HMI human machine interface.
应用推荐