机电一体化设计，体积小，重量轻，使用方便；
阐述了全自动、高精度流延机的机电一体化设计方案。
Mechano-electronic integration design scheme of full auto-matic, high precision film casting is studied in this paper.
波导空间功率合成技术采用了机电一体化设计，充分考虑各类因素的影响。
Waveguide space power combining technology takes use of mechatronics design, and fully considers the influences of various factors.
对大射电望远镜光机电一体化设计中悬索和馈源舱这一大柔性变结构系统的传输特性进行了研究。
The transfer characteristics of the flexible and variable structure cables and cabin system used in LT mechanical, electronic and optic integrated design is studied.
本课题是一个典型的机电一体化系统设计。
This topic is a typical integration of machinery system design.
对于更高的一级机电一体化产品的规划，设计和验证，有许多流程和程序是ALM和SCM系统不支持得。
And at the higher levels of planning, designing and validating a mechatronic product, there are processes and procedures that many ALM and SCM systems do not support.
本文介绍了剪切仪的机电一体化系统的设计，包括剪切仪的工作原理、机械结构及以PC机和PLC(可编程控制器)为核心的控制系统的设计。
This paper introduces the design of electro-mechanical shear instrument system, including shear instrument working principal, mechanical structure and control system that use PC and PLC as the core.
我们这个专业又分为三个专业方向：机械设计，机械制造，机电一体化。
There are three aspects in this major: mechanical design, mechanical manufacturing and mechanical-electric integration.
机械设计，自动化、机电一体化、生产线设计。
Mechanical design, automation, mechanical and electrical integration, production line design.
本文基于机电一体化的设计思想，研究了反射面变形对无线辐射特性的影响，给出了设计反射面无线结构的一些合理准则。
This paper investigates the effect of reflector surface distortion on the antenna radiation pattern, and gives some reasonable criteria for reflector antenna structure design.
电动栏杆机作为机电一体化产品必须采用系统设计思路，综合分析各系统设计的关键技术，才能整体提高栏杆机的主要技术指标。
The main technical indexes of electric barrier, as integration of mechanics and electrics product, can be improved as a whole with system design method and key technologies synthetically analyzed.
根据中试采矿模拟实验方案，运用机电一体化技术研制了一套作业模拟及动力学测试实验系统，并进行了系统软件和硬件设计。
A set of task simulation and kinetic measurement experimental system were built according to experimental scheme by use of mechatronics. Hardware and software of the system were designed.
主要研究了机电一体化系统的概念设计。
This paper studied mainly the conceptual design of mechatronics system.
作者在光电数控火焰切割机系统的研制过程中，创造设计了一种信息流图来描述和评价机电一体化集成。
The article presents a new information flow chart model in the research process of Flame Cutting Machine with Photoelectrical Numeric control to describe and evaluate mechatronics system integration.
设计出了一种机电一体化的特种电机——永磁扇片定子电动机。
This paper presents a type of special electrical machine with the electromechanical integration_per-manent magnet sector-stator motor.
本文从工程设计的角度，提出机电一体化自动机设计的概念，论述其设计方法和内容与传统机械自动机设计相比有何特点。
This article suggested a conception of mechatronics automatics design and discussed the characteristics of design method and content, which are different from the design of traditional automatics.
《机电一体化系统设计》是一门实践性和综合性都很强的课程。
Mechatronics System Design is a course with strong practicality and comprehensiveness.
本文对于从事机电一体化系统设计及PLC软件编程设计专业技术人员具有一定的参考意义。
This paper can be used as reference for technician and designer working in PLC programming and electromechanical system design.
启动冲击是造成带载启动机械设备损坏或缩短其使用寿命的主要原因，本文设计了机电液一体化的软启动系统。
The impact of starting is the main reason which damage the starting machine of carrying load or shorten its life. The soft starting system of mechanism, electricity and hydraulic has been designed.
结合机电一体化课程设计教学环节需要，设计用单片机作为控制系统的X-Y工作台。 X-Y工作台就是能分别沿着X向和Y向移动的工作台。
The curriculum designing teaching links of the mechanical and electrical integration needs the Nc X-Y working table, which is movable along Axis X and Axis Y.
介绍将光机电一体化技术融入一种盒装饮料无菌包装机中的设计、实践和效果。
Light machine electricity integral whole technique is melted into design, practice and result of aseptic packaging machine for Beverage Packed by box.
本文采用全新的机电一体化概念设计方法，对整个汽车制动系统进行了重新设计，最终得出理想的设计方案。
The braking system is designed again with the new mechatronic conceptual design method in this dissertation. The result is of drawing up perfect scheme.
该文利用简单廉价的机电结构实现了微米级的机电一体化系统的设计，该系统可用于在约束条件下测量混凝土的内应力。
A micron electro-mechanical system was designed by using simple and cheap structure. The system can be used to measure the internal stress of concrete on the condition of being constrained.
该机采用机电一体化，分层布料、振压结合、高度密度双控的设计原理，具有激振力大、成型速度快、操作简单、 运行可靠等优点。
QDV-10 adopts mechanotronics, press-vibration, double-layers material feeding, double control of height and density and have following advantage.
该机采用机电一体化，分层布料、振压结合、高度密度双控的设计原理，具有激振力大、成型速度快、操作简单、 运行可靠等优点。
QDV-10 adopts mechanotronics, press-vibration, double-layers material feeding, double control of height and density and have following advantage.
应用推荐