在机械仿真软件ADAMS基础上，用计算机建立了月球微重力环境并进行了数字仿真。
Based on ADAMS mechanical simulation software, a microgravity environment was established by computer and some simulation study had been carried out about the lunar lander.
通过仿真分析，可以对施工机械的机型、数量以及作业参数作出最佳选择，并且预测出施工的最短工期和最低施工费用。
By simulating analysis, the optimal parameters, Numbers and type of construction machinery can be obtained, and the smallest cost and shortest period of construction projects can be predicted.
在完成过程中，充分考虑了铺设轮的机械设计要求，采用了计算机辅助仿真设计、有限元分析和试验校验的方法。
In the process of completing, the mechanism design requests are considered fully, some methods such as the computer assistant simulation design, finite element analysis and test verify are adopted.
仿真结果表明：该新型控制器控制效果比传统PID控制器好，在其他非线性复杂机械系统控制上也有一定的应用价值。
The results of simulation show the new type of PID controller is better than the conventional type and it can be used on other no-linear complex mechanical systems.
建立了冗余度机械臂协调操作的数学模型，利用该模型对两机器人抓持同一刚性物体进行了仿真研究。
The kinematical model for coordinating manipulators is constructed and research is done through simulation examples for two coordinating manipulators holding one object.
最后通过对两个机械优化设计实例进行仿真试验，结果表明本算法求解效率高、收敛速度快、全局搜索能力强。
The simulation test was completed through two mechanical design cases. The result shows that the algorithm has high efficiency, rapid speed of convergence and strong capability of global search.
提出一种矿山液压工程机械的空载怠速全自动控制系统，分析引起仿真和实测结果差异的原因。
In the paper puts all-automatic control system of noload idling for mine hydraulic-engineering machine different of cause analysised emulation and practical measure.
介绍了故障树分析的传统方法，着重讨论了机械引信故障树定量分析的数字仿真方法。
This paper Introduces traditional method of fault tree analysis briefly. and discusses digital simulation method of mechanical fuse fault tree quantitative analysis.
对基于VRML技术在机械基础实验的实验仪器设备的静态建模方法及实验的动态仿真等的关键技术问题进行了探索。
The static state modeling method of equipment and the key technology of dynamic simulation in experiment of machinery bases based on VRML are explored.
论文基于模糊集合的交集与并集算子，给出了机械串联系统与并联系统的模糊可靠性数字仿真模型；
In the paper, models for fuzzy reliability digital simulation of mechanical series system and parallel system based on the operators of intersection and parallel set in fuzzy mathematics are given.
其中的虚拟样机建造方法与有限元分析手段在共同建立的联调平台下解决复杂机械系统设计及性能仿真方面具有理论意义与实用价值。
The method of Virtual Prototype Building and Finite Element Analysis is theoretically meaning and practically valuable for design and performance simulation of complex mechanical system.
该文就在机械设计基础实验课程中，引入计算机仿真技术，开设机械设计仿真实验作了一些研究。
This article researches how to introduce computer simulation technology and set up the machine design simulation experiment on machine design foundation experiment curriculum.
加载工程机械主要的两种加载模式正弦波载荷和阶跃载荷，试验台动态仿真的结果表明系统动态响应性能能够满足试验要求；
We put the two main engineering machine loading which are sinusoidal wave load and step load, and the results indicate that the dynamic responds are satisfied for the needs of the experiments.
文中将这一新方法应用到一个实例——工程机械轮胎可靠性仿真，所得可靠度与实际作业的统计数据甚为接近。
Finally, this method is used to show the reliability of tire for engineering construction machines in a living example, the result is very close to the statistic data in practice.
本文进行了模具标准件数据库、冲压过程动态仿真和模具的机械电解复合抛光技术两方面内容的研究。
In this paper two contents are studied: the data library of mold standard parts, dynamic simulation of the punching process and the mold's mechanical-electrolytic polishing.
借助机械系统动力学仿真分析软件ADAMS，探讨了在计算力矩、模糊变结构控制策略和所遴选的轨迹规划方法下，机械手的控制效果。
By using the simulation software ADAMS, the performance of manipulator which employing the designed control algorithms and the selected path planning method has been discussed.
机构运动仿真是计算机图形学与机械学相结合的一个研究领域，是机械设计技术与虚拟样机技术研究的一个重要方面。
Mechanism kinematic simulation is a research field of computer graphics and mechanical, a very important branch of mechanical design technology and virtual prototype technology.
人工生命是指用计算机和精密机械等生成或构造表现自然生命系统行为特点的仿真系统或模型系统。
Artificial life is a simulated or modeling system generated or constructed by using computer and precise mechanism, which behaves like a natural life system.
设计和优化等问题提供了基础，对电流波形和机械特性等进行仿真计算和实验校核，验证了该模型的正确性。
The correctness of the model is verified by the comparison of simulating and testing results of the current waveform, the output torque, the ripple torque and some other performance indexes.
本文提出将实物仿真与计算机仿真相结合，建立基于实验数据的机械系统动力学模型，研究了对系统动力学模型的修正方法。
This paper gives out the model of mechanical system dynamics and builds the correcting method for system dynamics model, which is based on the obtained data and computer simulations.
介绍了一种运用多体动力学进行机械系统仿真的新方法——矢量网络法，包括建模方法和其常规公式化的解题程序。
This paper describes a new method to simulate mechanical systems with the theory of multibody system-vector network method, including the modeling method and the normal formulized procedure.
仿真计算和实验结果表明该滤波方法对改善微机械陀螺仪的零偏稳定性有一定的实用价值。
The computation simulation and experiment results show that this filter processing method is much practical and valuable to improve the zero bias stability of micromachined gyroscope.
针对冲压机械的特点，采用计算机仿真和物理模拟，为冲压类机械动态特性分析与研究提供了一种实用方法。
According to the features of the punch machine, we research on the dynamic properties and put forward a practical way by means of computer simulation and physical simulation.
通过虚拟样机技术，工程师可以运用机械系统仿真试验，在设计阶段发现产品设计中的潜在问题，并快速进行修改，减少了对于物理样机的依赖。
By simulation tests, engineer can not only discover the potential problems of design and modify it in time, but also decrease the dependence on physical model.
然后将仿真结果和机械飞轮惯量试验台的试验结果进行对比并做了可行性分析，研究结果表明该电惯量系统是可行的。
Then will the simulation results and mechanical flywheel inertia of experimental results were compared and analyzed, and the results show the feasibility that electricity inertia system is feasible.
本文以西门子公司S7- 200系列CPU216型PLC控制JA21 - 160型机械压力机为实例，指出了对机械压力机plc控制进行仿真的必要性。
The PLC control of JA21-160 mechanical press is taken for example with S7-200 CPU216 PLC, and the necessity of emulation for PLC control of the mechanical press is pointed out.
为了提高养路机械作业的精度和稳定性，保证正常作业，需要对其作业参数进行仿真和优化。
In order to improve the precision and stability of the road maintenance machinery, and guarantee it to work normally, the work parameters need to be simulated and optimized.
对装有机械式自动变速器的SC 7130型样车的动力性、经济性进行了仿真，并对结果进行了分析。
The power performance and fuel economy of SC7130 sample car equipped with automatic mechanic transmission are simulated, and the results are also analyzed.
对装有机械式自动变速器的SC 7130型样车的动力性、经济性进行了仿真，并对结果进行了分析。
The power performance and fuel economy of SC7130 sample car equipped with automatic mechanic transmission are simulated, and the results are also analyzed.
应用推荐