组合机床具有许多长处：效率高、精度高、成本低。
Combination of machine tool has many advantages: high efficiency high accuracy and low cost.
组合机床，是由大量的通用部件和少量专用部件组成的工序集中的高效率机床。
Modular machine, by the large number of common parts and a small number of specialized components of the process focused efficient machine.
从工作实际经验出发，提出了机床电气故障检查的四种简单快速方法，以提高机床电气故障检查的效率和准确性。
It offers four simple and fast methods about checking the electric fault of the machine tool from the practice in order to improve the efficiency and accuracy of the checking.
提高数控机床维修的质量，减少故障发生率，提高诊断效率，充分发挥数控机床的使用效率。
Improved the CNC machine tool maintenance quality, and reduce to break down the occurrence rate, and increase the diagnosis efficiency, and CNC machine's use efficiency.
本次设计的粗镗组合机床，不仅可以保证加工精度，还可以提高加工效率。
The design portfolio of fine boring machine , not only to ensure accuracy, but also can improve the processing efficiency.
研究结果表明，相对伪随机激振法适用于机床结构的动态测试，具有较高的测试精度和效率。
As a result of experiment, the relative pseudorandom exciting method is applicable in the dynamic experiment of machine tool structure, with higher precision and efficiency.
这将会占用大量的机床实际加工时间，降低机床的效率。
Therefore much time of real machining is consumed, the efficiency of machine tool is reduced.
数控机床的普遍应用，保证了模具零件的加工精度和质量，大大提高了模具的准确率和生产效率。
CNC machine tool widely used to ensure that the mold parts precision and quality, greatly improved the accuracy of the mold and production efficiency.
此方法精度高，比现有机床试验规范推荐的方法简便易行，可在机床空载功率试验、效率试验以及机床节能研究中得到广泛应用。
It is much more simple and practical than the traditional method and can be used widely in the test of idle power and efficiency, and in the research on energy saving of machine tools.
高效率、高精度加工是数控机床加工最主要特点之一。
The high efficiency, the precision work are one of numerically-controlled machine tool processing most main features.
以此来提高机床与计算机的通信效率，并实现资源共享。
The efficiency of communication between machine tools and computers can be improved, and realizes the resources sharing.
配有自动送料装置，提高了机床的使用效率与安全性。
Furnished with automatic - feeder equipment, which has improved the service efficiency and security of the machine.
数控机床控制单元界面是人机交互的主要部位，其设计质量直接影响用户的学习和使用效率。
The control unit interface of nc machine tool is an important part for man-machine conversation whose design quality directly effects the study and working efficiency of users.
在数控加工中，切削力的大小直接影响着数控机床的加工精度与效率，因此对切削力的准确测量非常重要。
Precision measurement for cutting force plays an important role in the machining accuracy and efficiency of the numerically controlled machine tools.
研制专用数控系统，则可进一步提高电熔爆加工机床的加工质量和加工效率。
Developing special CNC system will enhance machining quality and efficiency of electric melting and explosion machine.
为了提高研磨效率与表面质量，在研磨机床中采用振动机构来实现轴向振动运动。
For the increase of finishing efficiency and surface quantity, the vibration mechanism was used in finishing machine so as to realize the motion of axial vibration.
指出了该程序的完成可实现数控系统的自动编程，从而提高机床使用的效率。
Automatic programming of nc system may be realized by the completion of the program is pointed out, and then operating efficiency of machine tool is raised.
使用宏程序可以极大地提高编程效率，并能扩展数控机床的使用范围。
It can improved programme efficiency with using macro program. And it can extended using scope of nc machine tool.
实践证明，在应用PLC进行技术改造后，该控制系统的硬件电路得到了简化，工作更加可靠，提高了机床工作效率。
Practice has proved that the hardware circuit of this control system has been simplified, the work is more valuable, and the working efficiency is so improved after PLC technological transformation.
用户使用机床加工的效率提高2倍以上，生产成本降低了50- 60%。
Users use machine tool processing efficiency by more than 2 times, the production cost was reduced by 50-60%.
结果表明，美国的机床制造工业的生产效率最高，依次为匈牙利、苏联和中国。
The results indicate the efficiency of US machine tool industry is the highest, followed by Hungary, USSR, then China.
极限切深试验表明，以稳定切削点所对应的主轴转速进行切削可以提高机床的切削效率。
The experiments to verify the limit cutting depth show that the cutting efficiency of machine tool can be improved by cutting at the spindle speed corresponding to the stable cutting point.
实践表明：该专用机床能较全面地加工出各种系列的氧枪喷头产品，且加工效率和产品质量都得到明显的提高。
Practice indicates the special CNC milling machine can process different series lance-tip products and the processing efficiency and product quality were improved.
机床的切削效率往往不是由机床的功率、机床所能承受的最大载荷所决定，而是由机床切削时发生自激振动的条件所决定。
It is well-known that machining efficiency doesn't depend on the machine power and the load which machine can bear, but depends on the condition in which self-excited vibration appears.
企业数控机床加工效率不高的主要原因涉及加工工艺技术水平、切削刀具、准备周期长短、激励措施及人才等方面。
The main reasons for low efficiency of nc machine tool include machining technology, cutting tool precision, preparative cycle, encouragement method and talents.
CXF卧式系列数控车方机床能够高效率、高精度地完成车削多棱体及四方、六方等多面工件的加工。
The CXF horizontal series of CNC machine can turn and mill polyhedron and contrate parts with high efficiency and precision.
实践证明，该技术能减少机床布线、节约成本、降低机床故障率、提高生产效率。
It has proven the technology that would reduce the wire arrangement, save the cost, decrease the faults rate of machine and increase the producing efficiency.
实践证明，该技术能减少机床布线、节约成本、降低机床故障率、提高生产效率。
It has proven the technology that would reduce the wire arrangement, save the cost, decrease the faults rate of machine and increase the producing efficiency.
应用推荐