电子模块取代原有的继电器，直接实现对道岔、信号机、减速器的控制和对轨道电路的状态识别。
Electronic modules, instead of traditional relays, perform directly the control of switches, signals and retarders and identification of the status of the track circuits.
本文所设计的正弦信号发生器主要由DDS波形产生模块、单片机控制模块、键盘输入模块和数码管显示模块组成。
This system consists of DDS signal generator module, MCU control module, keyboard input module and nixie tube display module.
介绍了一种多用途水声信号预处理机的具体设计，详细阐述了各模块电路的设计原理及工程实现，给出了部分电路的原理图。
A design of a multi-purpose hydro-acoustic signal preprocessor is introduced. A detail expatiation of the design principle and engineering realization of the modular circuits are given.
振动数据采集系统利用—对无线数传模块取代电缆线，实现了数据采集卡与上位机之间命令和数据信号的无线传输。
Wireless transmission between the data acquisition card and the upper computer is realized through the substitution of a couple of wireless data transmission modules for cables.
重点阐述了目标机端程序设计实现过程中，对参数实时修改和模型信号监视等功能模块的具体实现。
In the course of the realization of the target program, we realized the function modules with Real-Time parameters modifying and signals monitoring.
应用英飞凌单片机的定时器模块模拟计算出更多的位置信号，从而实现在低成本、高速运行情况下电机的空间矢量控制。
The timer module of Infineon was used to calculate more position signals, helping PMSMs run with high speed and lower cost.
其中硬件电路包括键控制模块、显示模块、输入信号整形模块以及单片机和CPLD主控模块。
Hardware circuit includes key control module, display module, plastic module of input signal, single chip computer control module and CPLD main control module.
以单片机为核心的各传感器接口模块并行处理各传感器信号，并通过双口存储器与上位处理器通信。
Modules with microcontrollers in the system process their signals parallelly, and communicate with host processor by dual port memory.
在人工控制应用中，发信机通过将发射机选择信号发送到适当的信道比选模块上来决定使用哪一台发射机进行应答。
In manually controlled applications, the dispatcher decides which transmitter site to use for reply by issuing a transmit Select signal to the proper site Voter Module.
系统由G-M管、高压模块、信号整形电路、电源模块、单片机和无线传输模块等部分组成。
The system by G-M tube, high-pressured module, signal conditioning circuit, power source module, monolithic integrated circuit and wireless transmission module is composed.
采用将信号处理机划分为若干个模块的设计方法，使得研制周期短，系统可重构性好，对算法的适应性强。
By means of module division, we designed it in a short time and got the virtue of easy reconstruction and good adaptability to algorithm.
接收端：接收器连接到电脑上，射频模块接收无线鼠标发射信号，由单片机解码，通过USB送入电脑控制光标动作。
Receiver: receiver connected to computer, rf modules receiving wireless mouse emission signal decoding, through by MCU, computer control cursor movement USB into.
系统以工控机为核心，采用分布式远程模块完成数据的采集与控制信号的发送。
The core of this system is IPC and the distributed remote moulds are used for the date acquisition and control signal sending.
系统硬件电路包括音频数字信号源实现声音信号产生、数字声强级控制、多机数据通信、液晶显示和电源等模块单元。
System hardware circuit audio digital signal source achieve this functions: sound signals, sound intensity level control, data communications, liquid crystal display, alarm and power.
采用将信号处理机划分为若干个模块的设计方法，使得研制周期短，系统可重构性好，对算法的适应性强。
Through module division of the signal processor the development period is shortened, and the processor is easy to be reconstructed and highly adaptable to algorithms.
该装置的接收模块能接收多个感应探头的信号，应用时将感应探头安装在起重机各凸出部位。
The receiver module of the device could receive signals from several inductive probes. The inductive probes should be installed on the protruding points of the hoisting machinery.
频率合成器是作为接收机中的重要模块，它的性能指标直接决定了本振信号(LO)的精度和纯度。
Synthesizer is an important block in the receiver whose performance is directly related to the accuracy and purity of the local oscillator signals (lo).
控制程序采用模块化的设计方法，用VHDL实现电路行为的描述，采用状态机控制整个流程，实现对各路控制信号的同步。
The control programme describes the circuit behavior in VHDL by employing the modularized design method and USES state machines to synchronize the control signals.
上位机数据处理模块主要将所接收的信息进行分析处理并将信号还原显示。
The host computer data processing module will be analyzed and processed the receive data, and revert it.
该文详细论述了基于FPGA的单板信号处理机的模块化设计及实现，并通过仿真和测试验证了设计的正确性。
This paper discusses the modularized design and implementation of single board signal processor based on FPGA in detail, and the validity of the design is verified by simulation and test.
将用户输入的银行键信号传送到互联网模块，并为了把互联网模块的互联网信息，通过画面和扬声器进行输出而设置的电视机模块。
The bank key signal input by the user is transmitted to Internet module. The television module can output the Internet information of Internet module by screen and voice.
单片机自动检测各工作单元，一旦出现故障点即启动通讯模块向中心计算机传输数据信号。
The monolithic processor automatically detects each working unit of, once the fault point occurs, a communication module is started to transfer the data signal to a central computer.
介绍一种技术性能比较先进的交通信号控制机，这种信号机不仅能够自动地进行多时段控制，还可以接入网络实现在线控制；电路设计采用模块式的电路结构，可根据用户的功能需要增减模块电路。
This paper introduces an advanced traffic signal controller, which can not only implement multi-time block control, but also can be connected with network in order to realize on-line control.
介绍一种技术性能比较先进的交通信号控制机，这种信号机不仅能够自动地进行多时段控制，还可以接入网络实现在线控制；电路设计采用模块式的电路结构，可根据用户的功能需要增减模块电路。
This paper introduces an advanced traffic signal controller, which can not only implement multi-time block control, but also can be connected with network in order to realize on-line control.
应用推荐