本文通过实验研究了电子膨胀阀流量与开度的关系。
The relation between opening and outflow of EEV (Electronic expansion valve) was studied through the experiment in this paper.
本文通过实验研究，找出了影响细颗粒尾砂絮凝沉降的因素。
On the basis of experiments, the factors influencing the flocculating settling of fine particle tailings have been found.
本文通过实验研究和分析，对平板毛坯普通旋压的变形方式进行探索。
The deformation mode of conventional spinning of plates has been studied in this paper through experiments and analysis.
本文通过实验研究了蒸发舟温度与加热电流的关系，并对结果作了分析。
In this paper, the relation of evaporator temperature and heating current has been investigated and discussed.
本文通过实验研究了超声波辐射下安息香的缩合反应及该反应的最优化条件。
This article analyzes the optimum condition of the reaction of benzoin condensation with the supersonic in the experiment.
摘要：本文通过实验研究、理论计算和有限元方法对膜片弹簧载荷变形进行了研究。
Abstract: Inthis article, experimental research, theoretical calculation and finite element method have been used to analyze the load deformation characteristics of diaphragm spring.
本文通过实验研究，目的在于检验范文模仿法在中等职业学校写作教学中的作用问题。
This paper is to examine the role of model—imitation practice in the teaching of writing in vocational school by experiment.
本文通过实验研究和理论分析，提出准确计算换热器集箱管组中流量分配的离散模型。
This paper proposed an accurate calculation discrete model for the flow distribution in manifolds for heat exchangers.
本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。
Through experiments of high speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.
本文通过实验研究了不同尺寸的硬质钢球弹丸对不同壁厚的低碳钢圆钢管的侵彻和穿孔效应；
A systematic experimental study has been conducted an mild Steel tubes of various thickness in their perforation by hard steel spheres.
本文通过实验研究了金刚石薄膜涂层刀具的破损机理及刀具表面状态、切削用量对其损坏形式的影响。
This paper studied the breakage mechanism of the diamond film-coated tools, the influence of the surface appearance, the cutting parameters on the damage forms.
本文通过实验研究的方法观察了300个自然语句中焦点重音和这些句子的短语中语义重音的分布情况。
This paper empirically investigated the distribution of focus-related accents within sentences and the distribution of semantic accents within phrases in Chinese through 300 natural utterances.
本文通过实验研究，分析电晕放电的特点，提出基于涡旋动力学理论的挠场与真空零点能相干原理来解释推力的产生。
This paper analyzes the trait of corona discharge by experiments, and then points out that the force of the Lifter is come from the vortex's dynamics.
邻苯二甲酸氢铷(RAP)是一种有机极性离。产型晶体。本文通过实验研究了它在非极性轴方向的介电、DC电导、P -e曲线、光透过率等有关性能。
Rubidium acid phthalate (RAP) is an ionic organic polar crys-tal. In this paper, the experimental studies of its dielectric property, DCconductivity, P-E curve and transmission are reported.
本文通过外场实验研究和理论分析认为，终端沉降速度公式并不适合分析烟幕性能。
In this paper, through outfield experimental research and theory analysis, the Stokes final sedimentation velocity formula is not demonstrated to adapt to analyzing performance of smoke.
本文主要是对用电磁声换能器，通过测量超声波幅度变化来测量铁磁性材料内部应力的方法进行实验研究。
The stress in ferromagnetic materials was studied by measuring the change of the amplitude of ultrasonic wave with electromagnetic acoustic transducers.
本文以泵系统为研究对象，通过实验和计算的方法研究阀调节引起的全系统的瞬变特性及影响因素。
Aimed at pump system, this article investigates the transient characteristics and the influencing factors of the whole system by means of experiment and numerical calculation.
本文在实验的基础上，研究学习汉语的日本学习者是否能通过阅读习得词语。
Based on experiments, this study investigated whether Japanesespeaking learners of Chinese can learn Chinese vocabulary through reading.
本文通过现场检测实验，研究了不同高度支撑架内力随混凝土浇筑过程的变化规律。
Research in this paper is about the alternative rule of the axial force of supporting pole with different support height during the period of casting concrete through field detection.
本文通过实验模拟的方法研究了声波测并相控线阵声波辐射器的指向性测量方法。
The paper studied the measurement method for directivity of phased-array acoustic transmitter in acoustic log by experimental modeling method.
此外，本文还对线性散列技术作了一般性扩充，并通过模拟实验研究了方法的性能。
In addition, a general expansion of lip ear hashing and the results of simulation of performance of the method are given as well.
本文意图通过实验研究语音中介在阅读与默写中所起的作用。
The purpose of the present study is to investigate by experiments the role of phonological media in reading and memorial writing.
因此本文设计了蒸发式冷凝器性能测试实验室，通过实验的方法进行研究。
A laboratory is established to do this job in an experimental way in this article.
本文通过实际应用和实验研究，提出了R410A系统中零件的选用及提高能效比的方法。
Basing on application and experimental research, this article discusses the way of choosing part and improving EER in R410A system.
本文通过采用实验和数值模拟的方法，研究了喷动流化床内气体混合特性以及床内气固两相的流动特性。
The dissertation studies the characteristics of gas mixing and the gas-solid two phases flow in spouted-fluidization bed with experiment and numerical simulation methods.
以杭州游泳馆膜结构屋顶为例，本文通过风洞模拟实验的方法研究了大坡度膜结构屋面的风荷载特性。
Taking the membrane structure roof of Hangzhou Swimming Stadium for example, wind load characters on large slope roof were studied by wind tunnel simulation.
本文通过拉伸实验研究了国产聚碳酸酯板的力学行为，得到了这种材料在不同应变速率下的真实应力—应变曲线。
The mechanical behaviour of polycarbonate (PC) is studied in this paper by tensile experiments. A set of true stress—strain curves for different strain rates is obtained.
本文通过理论分析，结合实验室研究与现场生产，对YL112铝合金材料表面氧化处理工艺进行了研究。
In this thesis, by combining laboratory research, field production and theoretical analyze we have studied superficial oxide treatment technology to YL112 aluminum alloy material.
本文通过对滚动轴承的实验研究，分析了预测中权的选择和预测误差。
In this paper, the selection of weight facfor and the error in forecast based on experiment of rolling bearing are discussed.
本文通过对滚动轴承的实验研究，分析了预测中权的选择和预测误差。
In this paper, the selection of weight facfor and the error in forecast based on experiment of rolling bearing are discussed.
应用推荐