并且利用空间联合的方法证明了任意有限维分布族都存在着分布族与之相同但不可测的随机过程。
Furthermore, using the method of Spaces union, it is proved that it is impossible to get measurability from just finite dimensional distribution class.
采用三维时间域有限差分（FDTD）方法研究了扫描近场光学显微镜中光纤微探针的近场分布特性。
The near field distribution of uncoated and metal coated fiber optic probes were characterized by the method of three dimensional finite difference time domain (FDTD).
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
目的：分析不同年龄的下颌骨正中受力时，下颌骨三维有限元分布的差异。
Objective: To analyse the difference of the stress distribution during mandible to be forced at the midline.
方法：用二维有限元法分析阻萌力减少前后下第一磨牙牙周组织内应力分布的变化。
Metbods: a two dimensional finite element model was built up to analyse the stress within the periodontal tissue of the first molar, with a reduced tooth eruption-resistant force.
对无穷维分布参数结构，依据有限维降阶模型设计控制器会导致系统闭环性能变差，并有可能使系统失稳。
For distributed structures, the closed loop performance of the control system might be badly reduced without considering the spillover, and is likely to become unstable.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
目的：用三维有限元法分析不同大小颏兜后上牵引力作用下髁突软骨和下颌骨的应力分布和位移，探讨颏兜的作用机制。
Objective:To analyze the mechanism of the different chincup forces through the stress distribution of the mandible and the mandibular condylar cartilage.
方法采用脊柱活动节段的三维有限元模型分析了脊柱在直立位、前屈位和后伸位的应力分布情况。
Methods Stress distribution of the spine in the upright, flexion and extension positions was analyzed using a three-dimensional finite element model of the spinal motion segment.
本文采用三维有限元方法，研究堰闸坝在静力状态下其应力和变位的分布规律。
The paper studies distribution law of stress and strain of gate-dam under static regime with three-dimensional finite element method.
目的建立人工髋关节置换术后的三维有限元模型，分析研究人工股骨柄、骨水泥和人体股骨的应力分布。
Objective a three dimensional finite element model after total hip replacement was established to analytically study the stress distribution of the artificial stem, bone cement and human femur.
为此，本文重点完成了利用三维有限差分束传播法求解条形波导中场分布的计算程序的编写和调试。
So the main work in this dissertation is compiling and debugging the program for solving the field distribution in channel waveguides using three-dimensional finite-difference beam propagation method.
方法：用三维有限元法研究天然牙及中间种植体受力后的应力分布特点及位移规律。
Methods The stress distribution and displacement of abutment were studied and analyzed by means of three-dimensional finite element when different loading was applied.
用电容传感器的三维有限元模型，分析了8电极电容层析成象传感器灵敏度的三维分布。
The three dimensional sensitivity distribution of an 8 electrode capacitance tomography sensor is analyzed using three-dimensional finite element method.
利用该方法生成的有限元程序计算了一个三维模型的磁场分布。
The finite element program generated by this method is utilized for calculating the three dimensional magnetic field distribution of a model.
利用ANSYS和MATLAB软件，对缩放型片材机头中熔体的速度、压力和剪切应力的分布进行三维有限元模拟和分析。
Softwares ANSYS and MATLAB were employed to analyze and simulate the velocity, pressure and shear stress distribution in sheet extruder dies based on the three-dimensional FEM.
本文建立了有限几何尺寸板条激光介质的三维温度分布模型。
In this paper, a three-dimensional model for temperature profile in finite laser slabs is presented.
目的研究人工腰椎间盘三维有限元模型的建立及其应力分布。
Objective To study artificial lumbar intervertebral disc three-dimensional finite element model and its stress state.
采用有限元方法分析由于防火涂料局部破损而造成的火灾下钢构件内的三维热传导问题，给出构件内温度的分布规律。
The Finite Element Approach is used to analyze the temperature distribution of steel members covered by fire insulation subjected to fire.
本文建立了有限几何尺寸棒状激光介质瞬态热分布的三维模型。
A three-dimensional model for transient thermal profile in a finite laser rod is presented.
每一个时间步长，用有限元方法解二维的拉普拉斯方程，求出箔上的电势分布。
For every time step, the two dimensional Laplace's equation is solved by a finite-element method, so the potential distribution over the foil is given.
目的建立足部三维有限元模型，对足后部骨骼在踏跳中的应力分布进行分析。
Objective To develop a three-dimensional finite element model of human foot for studying stress distribution of the hind foot bones during the jumping moment.
用三维弹塑性有限元分析方法，全面分析了点焊搭接接头的应力分布情况。
Using method of three dimensional FEM analysis, whole stress distribution in the joints is are obtained.
本文采用三维有限元法，对碾压混凝土坝底孔缺口坝段在过流情况下，顶部未到设计龄期的碾压混凝土和大型导流底孔周边的应力分布进行了分析。
In this article three dimension FEM is adopted in the stress analysis of bottom diversion outlet and notch segment of a RCC gravity dam when flowing design flood.
用三维有限元数值模拟软件DEFORM-3DTM进行了数值模拟研究，得到了锻造载荷-行程曲线以及整个成形过程的应力和应变分布等，并与传统的均匀加放余量法进行了比较。
At the same time, 3D-FEM simulation of the whole process was performed using DEFORM-3DTM software. And the load-stroke curve, effective stress and strain distribution, and so on were obtained.
采用三维刚塑性有限元法对四种径向精锻变形道次的变形分布进行了数值模拟计算；
The strain distributions of four kinds of radial forging processes have been simulated by rigid-plastic FEM.
方法建立骶髂关节与骨盆三维有限元模型，且骶骨上面加载，双侧坐骨结节为支撑点，分析骶髂关节面的应力分布特点。
Methods Loads were on the superior surface of the sacrum of the TDFEM and supporting on the ischial tubercle to imitate the SSS and calculated the stress on the surface of sacroiliac joint.
方法建立骶髂关节与骨盆三维有限元模型，且骶骨上面加载，双侧坐骨结节为支撑点，分析骶髂关节面的应力分布特点。
Methods Loads were on the superior surface of the sacrum of the TDFEM and supporting on the ischial tubercle to imitate the SSS and calculated the stress on the surface of sacroiliac joint.
应用推荐