通过抗滑桩结构的力学分析,建立了抗滑桩结构的有限差分模型。
The mechanical analysis is made on anti-slide pile with a new model of finite difference method.
以异质材料低碳钢与纯镍电阻点焊为例建立了电阻点焊熔核形成过程的电热耦合有限差分模型。
A three dimensional finite difference electric thermos model for resistance spot welding nugget process of dissimilar materials is introduced.
以某钢厂宽板坯连铸结晶器为研究对象,利用商业软件PHOENI CS建立一个三维有限差分模型,模拟宽板坯连铸结晶器内钢液的流动分布。
The fluid flow in a wide slab continuous caster mold was simulated by a three-dimensional model set up using the commercial software PHOENICS.
采用基于等离子体物理模型的时域有限差分方法模拟了金属薄膜近场成像特性;采用薄膜传输矩阵方法计算了金属薄膜对倏逝波分量的放大作用。
The property of the near field subwavelength imaging in a metal thin-film structure is investigated using finite difference time domain method based on Drude model.
采用相场模型和有限差分方法,模拟了过冷纯金属熔体的枝晶生长,计算区域为二维正方形均匀网格。
Dendrite growth has been simulated with the phase field method and finite difference schemes on a two dimensional rectangular domain with a uniform square mesh.
并利用有限差分方法,对温度场数学模型进行数值求解。
Numerical solution is given to mathematical model of formation temperature field by full implicit finite difference method.
在声波波动方程有限差分波场数值模拟中,由于计算模型的限制,导致很强的人为边界反射的产生。
In numerical wave simulation of finite difference for acoustic wave equation, due to the limitation of computer model, there inevitably exists strong artificial boundary reflection.
并通过有限差分方法,建立了二维两相聚合物驱数值模型。
By limited difference method, two dimensional, two phase polymer flooding numerical model is built.
基于MIMD并行计算机模型,本文讨论了CFD问题应用显式有限差分方法的并行化问题。
Based on MIMD parallel computer model, parallel implementation of explicit finite difference methods has been discussed for computational fluid dynamics (CFD) problems.
对深部矿柱在承受高静载应力时的动力扰动力学模型进行应力波传播力学响应分析,采用FLAC3D有限差分程序对深部开采圆形矿柱进行高应力下动力扰动数值计算。
By using an explicit finite difference program FLAC3D, a model of numerical calculation is established for a deep mining pillar with dynamic disturbance under high stress.
在前人研究基础上,用有限差分方法建立了一个非稳态二维地温场的数学模型。
An unsteady two-dimensional soil temperature field model is established using the limited difference method in this paper.
本文提出了基于微肋管的薄液膜蒸发沸腾的输运现象数学模型及其有限差分求解方法。
The mathematic model for the transportation phenomenon of thin film evaporation basedon microfin tubes, as well as its finite difference numerical method, was conducted.
本文介绍了基于广角隐式有限差分单程波传播算子的起伏地表叠前深度偏移方法,并对SEG山前带推覆构造模型进行了检验。
The paper introduced the prestack depth migration from relief surface based on implicit wide-angle finite-difference one-way propagation operator and used SEG piedmont nappe structure model for test.
采用全隐式有限差分方法对模型进行了数值计算。
By using a full-hidden finite difference method a numerical calculation was conducted of the above-cited model.
提出一种基于半导体器件漂移扩散模型并结合交替方向隐式时域有限差分(AD I -FDTD)法的新型全域FDTD法。
A novel global FDTD scheme based on a drift-diffuse model of semiconductor combined alternating direction implicit finite-difference time-domain (ADI-FDTD) method is presented in this paper.
建立了含有微气泡的平板边界层方程,并采用一种简单的混合长度模型和有限差分方法对该方程进行了数值计算。
The equations of the boundary layer containing microbubbles on the plate are established, then calculated employing a simple mixing length model and a finite difference method.
然后为了能有效求解所得模型,本文利用有限差分方法构造了一种半隐式的数值离散格式,同时给出了模型中的几个重要参数的估计。
Furthermore, in order to solve the proposed model efficiently, we construct a semi-implicit numerical scheme by using finite difference method and estimate some important parameters.
以傅里叶定律和能量守恒定律为基础,结合有限差分理论推导出有限差分温度计算模型。
Base on the Fourier law and conservation of energy, and combine the finite difference, this dissertation deduce finite difference temperature model.
基于时域有限差分算法,提出了一种新的电力电缆电磁瞬态分析的计算模型。
Based on the finite difference time-domain (FDTD) method, a novel model is presented for transient analysis of power cable system.
采用有限差分方法,建立了基于混凝土绝热温升试验的早龄期混凝土温度场计算模型。
A finite difference model for predicting temperature fields in early age concrete is presented based on adiabatic test on concrete.
采用双参数地基模型来改进温克尔地基模型,并用有限差分的方法求解任意荷载下条基的微分方程,得到便于工程计算的线性方程组。
Take double parameters foundation model to improve Winkler model, and use finite difference method to resolve linear basis under columns and get linear equations which could be easily used in works.
根据喉部沉积的传热模型建立了偏微分方程组,采用有限差分完全隐式格式进行数值分析计算。
On this heat transfer model the differential equations were based, and the finite difference complete concealed grids were used in the numerical analysis computation.
在这个计算中,采用了流体——弹塑性变模量模型,使用了拉格朗日坐标有限差分方法和人造粘性,获得了冲击波、空腔和波形参数,并分析了这些参数。
In this computation a fluid-elastic plastic model and a finite difference method of Lagrange coordinate are used The parameters of shock, cavity and waveform are obtained and analysed.
讨论了时域有限差分(FDTD)法中局部网格细化技术的实现,给出了边界源的等效模型。
In this paper, the implementation of the subgridding technique in the FDTD method is discussed, and the modeling boundary sources on the coarse_fine grid boundary are given.
对于支配方程,提出了聚合物驱模型的全隐式有限差分方法。
A full implicit finite difference method is presented for the polymer flooding model.
开发了一种基于有限差分算法的卷取温度控制模型,并介绍了时间和空间步长参数的选取方法。
The control model for coiling temperature based on finite difference method is developed, and how to choose the time and space step is introduced.
对于层状模型,若采用直接积分的中心差分方法,计算过程十分简单,也可用于有限差分等方法的计算中。
For a layered model the computational procedure for the central difference method of direct integration is very simple and easy.
并以简例说明了用有限的马尔可夫参数实现状态模型和差分模型的统一方法。
Simple examples for explaining the unifying realization methods of state space and difference equation model using finite markov parameters are also presented in this paper.
由于GIS中的栅格网络数据可以直接作为有限差分的网格,二维数值模型可用有限差分来求解。
As raster grid networks of digital elevation model in GIS can be used as the finite difference mesh, the continuity and momentum equations are solved numerically using the finite difference method.
由于GIS中的栅格网络数据可以直接作为有限差分的网格,二维数值模型可用有限差分来求解。
As raster grid networks of digital elevation model in GIS can be used as the finite difference mesh, the continuity and momentum equations are solved numerically using the finite difference method.
应用推荐