在板料成形有限元模拟软件系统中，图形平台是重要的组成部分。
Graphics software is an important part of a finite element system for sheet metal forming.
选择共轭梯度法解决由有限元法形成的大型稀疏矩阵方程，应用FORTRAN语言编制了数值模拟系统软件。
Conjugate gradient method were choosed to solve the large sparse matrix equations induced by the FEM and computer language FORTRAN was used to programme the numerical simulation system software.
三轴转台框架系统的三维模拟与分析，采用CAE技术，使用PATRAN有限元软件。
The CAE technology and PATRAN finite element software were used in three-dimension simulation and analysis for three axis turntable frame system.
本文主要由两个部分构成，即基于有限元程序自动生成系统(FEPG)的组合网格法和组合网格法在焊接数值模拟中的应用。
This paper consists of two parts: one researches mainly on the Composite Grid method based on FEPG, the other studies the application of CGM on numerical simulation of welding.
本文针对高压全缠绕复合材料压力容器，应用有限元分析系统对其应力偏大的筒身应力进行了弹塑性非线性数值模拟。
In this paper the finite element analysis is applied to simulate the elastic-plastic numerical value for the high-pressure full wrapped composite pressure-vessel.
用自开发的有限元仿真软件包模拟计算电极对间的电容值，确定12电极电容层析成像系统的灵敏场分布。
A finite element simulation software is developed, which is used to calculate capacitance between electrodes and define the sensitivity distribution of 12 electrode capacitance tomography system.
由于激光焊蜂窝夹套的特殊制造工艺及其新颖结构，需对其进行一个系统的实验研究和理论分析(主要是有限元数值模拟分析)。
Due to the special manufacture craft and the new structure of laser welded dimple-plate jacket, it is necessary to be studied by experimental and theory analysis (mainly finite element analysis).
首先系统研究了有限元模拟扁挤压筒的关键技术，为后续的数值分析提供了技术条件。
Firstly, the key technology of numerical simulation theory is discussed to offer the technique support to subsequent analysis.
摘要以某型轿车车门为例，建立了前侧门系统的有限元模型，施加了边界条件以模拟实际工况，并采用 ABAQUS求解器计算获得了应力时间历程。
Abstract A finite element model for thefront door system is build, boundary condition is performed to simulate thereal situation, time history of stress is obtained through calculating byABAQUS.
采用有限元方法对发生松动故障的转子系统进行模拟，得到系统的故障特征。
With FEM used to simulate the rotor system on which the looseness fault is occurring, the fault characteristics are obtained as follows.
采用有限元数值模拟方法系统地研究了电场作用下不同结构裂缝介质中单相和两相渗流机理。
In this paper, mechanism of one - and two-phase fluid flow in fractured media with different structures under electric fields was systematically investigated by finite element method (FEM).
采用结构分析有限元软件ABAQUS对具有不同冷却系统的两种结晶器在工作过程中的稳态温度场进行了模拟。
The temperature distribution in two different continuous casting moulds during a steady casting process was numerically simulated with a commercial FE analysis code ABAQUS.
应用带有力学调控系统的各向异性骨再造模型结合有限元法，进行妇女骨质疏松过程及运动防治的模拟。
The processs of female Osteoporosis and its prevention by Physical activity were simulated using anisotropic bone remodelling model with mechanostat combining with finite element method.
讨论组合网格法(CGM)在有限元程序自动生成系统平台(FEPG)上的具体实现，并对激光焊接问题进行数值模拟，取得了理想的仿真结果。
Discussed the CGM based on finite element program generator (FEPG), the laser welding problems is simulated on it, and reached some ideal simulation results.
拱坝—地基系统稳定分析中对坝肩破坏的研究至关重要，而目前广泛采用的有限元法不能够有效地模拟岩石基础中断层、节理等薄弱面的不连续特性。
Study of abutment failure is important in stability analysis of arch dam-foundation systems. FEM cannot effectively simulate the faults and joints in rock foundations.
基于变密度拓扑优化方法和声-结构耦合系统有限元模型，对四角固支箱体模拟的飞机座舱进行了减振降噪分析。
The structural topology optimization method—variable density method is used to optimize the topology of an acoustic_box for interior sound pressure reduction.
本论文运用理论研究、物理实验和有限元数值模拟相结合，系统地研究了粉末成形规律及其致密化机制。
In this paper, theoretical research, physical experiment and numerical simulation are combined to systematically study the Aluminum powder forming discipline and compacting mechanism.
针对煤层气储层裂隙发育特点，利用三维有限元方法，系统地进行储层裂隙双侧向测井响应的数值模拟研究。
According to the development characteristic of fracture in CBM reservoir, the response of dual laterolog is systematically simulated with three dimensional finite element method.
公开一种在计算机上产生模拟多孔介质中流体流动的有限元模拟程序的本机运算符和测试代码文件的改进方法和系统。
An improved method and system are disclosed for creating on a computer a native operators and test code file for a finite element simulator to model fluid flow in porous media.
通过有限元法三维数值模拟，对方坯连铸软接触结晶器系统中的电磁参数进行了计算。
Some electromagnetic parameters in soft contact continuous casting mold of billet were analyzed through 3-d FEM numerical simulation method.
用自开发的有限元仿真软件包模拟计算电极对间的电容值，确定12电极电容层析成像系统的灵敏场分布。
A finite element simulation software is developed, which is used to calculate capacitance between electrodes and define the sensitivity distribution of 12 electrode...
同时对某水电站引水隧道系统进行了三维粘弹塑性有限元数值模拟和三维弹塑性有限元数值模拟。
In this paper, a 3-d visco-elastoplastic FEM and a 3-d elastoplastic FEM are used to analyze the stability of the excavation structure of one hydropower station diversion tunnel system.
使用大型三维非线性有限元程序（TFINE），对拉西瓦拱坝-地基系统进行了三维弹塑性有限元数值模拟，对该拱坝-地基系统在正常荷载下的位移和应力进行了分析。
This paper presents the elastoplastic numerical results of Laxiwa arch dam-foundation system by employing 3D non-linear FEM code, TFINE. Displacements and stresses of the dam were analyzed.
使用大型三维非线性有限元程序（TFINE），对拉西瓦拱坝-地基系统进行了三维弹塑性有限元数值模拟，对该拱坝-地基系统在正常荷载下的位移和应力进行了分析。
This paper presents the elastoplastic numerical results of Laxiwa arch dam-foundation system by employing 3D non-linear FEM code, TFINE. Displacements and stresses of the dam were analyzed.
应用推荐