利用ANSYS建立了某型号高速加工中心的有限元整体分析模型，探讨了不同位置导轨的刚度变化对高速加工中心固有频率的影响。
The FE model of the highspeed machining center is established using the software ANSYS. The influence of guideway 'rigidity on natural frequency of the highspeed machining center is discussed.
使用这种模型对SYR200旋挖钻机桩架进行了整体有限元分析，分析对钻孔机桩架的结构设计有指导意义。
Complete finite element analysis is conducted on pile frame of SYR200 rotary pile drill with the model, which provides guiding reference for the design of pile frames.
通过对钢吊箱施工过程中的结构的有限元分析，揭示了施工过程中钢吊箱整体结构的受力特点。
After analyzing the finite element of structure on steel box sling during the construction, the author exhibited the bearing force characteristics of overall structure on steel box sling.
利用有限元分析软件ANSYS，对一个典型的管母线、支柱瓷瓶和电杆系统作整体结构强度分析。
With finite element analytic software ANSYS, the intensity analysis of the integral structure for typical tubular busbar, support insulator and the pole system was made.
用整体动力有限元方法分析桩周土及桩间距对桩基地震反应的影响。
The influence of seismic response on piles due to pile-surrounding soil and spacing between adjacent piles was studied with the method of whole dynamic finite element under the seismic condition.
重点对整体结构有限元非线性抗火反应全过程分析方法进行了讨论。
The entire structure non linear finite element fire resistant response method in an overall process analysis is emphatically discussed.
本文将有限元法用于高层筒体结构的整体稳定分析。
In this paper, the finite element method is used for overall stability analysis of tall building tubular structures.
在有限元分析中，节点编号对整体刚度矩阵的带宽起着决定性的作用。
In finite element analysis, node numbering plays a decisive role in determining the bandwidth of the global stiff matrix.
简要论述了振动模态分析方法，并指出有限元分析模型在结构整体监测中的重要性。
In this paper, the vibration model analysis is briefly introduced and the importance of finite element model (FEM) in the whole monitoring of structures is stressed.
采用有限单元法对升船机卷筒结构进行整体计算，提出了有限元分析的力学模型，对筒壳、幅板的强度及刚度作了全面分析。
The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
本文在有限元应力分析的基础上建立了虹吸离心机转鼓整体优化计算的数学模型，并对实际转鼓进行了优化计算。
In this paper, base on the finite elements stress analysis, the mathematic model of the optimum calculation of siphon peeler centrifuge basket is been built.
利用有限元法，通过有限元分析软件对其实际工况进行整体结构数值模拟，得出主轴装置在实际工况下的应力、变形情况。
It makes use of finite element method to carry out the numerical value simulation by software in reality in order to get the condition of strain and deformation on the main axle installing.
应用非线性有限元程序对单层椭圆旋转壳进行了整体稳定分析，并介绍了网壳的节点设计情况。
With the nonlinear finite element program, the whole stability of the single-layer elliptic rotary shell is analyzed; and the joint design of the reticulated shell is introduced.
对温度荷载作用下整体滑动板块进行了三维有限元分析。
The whole ship slab under the thermal load is analyzed using the three dimensional finite element.
本文利用ANSYS有限元程序通过正交设计的方法对格构式斜腿刚架进行了平面外整体稳定承载力参数分析，得到显著影响因素。
By means of the finite element program ANSYS and using orthogonal design method, the parameters having effect on the stability of this structure were analyzed and primary factors were obtained.
用有限元和断裂力学方法分析大型整体机翼下壁板的破损安全特性。
The fail safety of large integrally stiffened panel is investigated based on the linear elastic fracture mechanics and finite element analysis.
本文分析了三种钢筋混凝土有限元模型：组合式模型、整体式模型和分离式模型。
This thesis introduces three kinds of reinforced concrete finite element method model which are assembled model, smeared model and discrete model.
采用强度折减有限元法分析一无土钉支护三维素土坡的整体稳定性。
An elastoplastic strength reduction FEM is used to analyze the stability of the unsupported excavation slope.
应用ANSYS对整体壁板及损伤后双面修补壁板进行有限元分析。
ANSYS is used for the analysis of the integral panel and the double-face repair panel.
并采用强度折减有限元法分析了海堤在自重、波浪力和渗透力耦合作用下的整体稳定性。
The overall stability under the coupling force of dead-weight, wave force and seepage force is analyzed by the shear strength reduction with FEM.
有限元分析结果表明，保温砌模混凝土墙的抗侧刚度可用厚度为其三分之二的等效实体墙计算或用小开口整体墙计算。
Finite element analysis shows that the lateral stiffness of the concrete grill wa ll can be calculated by an equivalent solid shear wall with the thickness of two third of the original wall thickness.
笔者尝试实现损伤理论有限元的结合(损伤有限元)，并运用于对整体结构的损伤进行分析衡量。
Damage FEM, and applies it to analysis of holistic structure damage, defines a new degree of damage with strain as the variable of damage.
在此基础上，通过整体模型疲劳试验和有限元分析，比较了试验结果和理论计算结果。
Based on these, test results and theory results are compared through model fatigue test and finite element analysis.
有限元强度折减法分析边坡稳定性的一个关键问题是根据有限元计算结果来判别边坡是否处于整体破坏状态。
How to judge the slopes state with FEM based on shear strength reduction methods, stability or instability based on the results of FEM is a key problem.
硬x射线调制望远镜HXMT整体有限元分析结果表明：采用螺栓固定的安装方式，硬x射线调制望远镜HXMT在正弦激励状态下满足设计要求。
Basing the simulation analysis results of HXMT, the following conclusions can be got: the design standard can be met in sine excitation state in bolt fix install method.
对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。
The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth. A feasible and accurate finite element model is offered.
对秦皇岛站大里营刚性斜拉杆铁路斜拉桥用三维有限元进行了整体空间分析。
In this paper, three dimension analysis of the Daliying railway rigid bar stayed bridge in Qinhuangdao Station is reported.
因此，采用三维杆系有限元模型对隔震结构进行整体分析具有重要的现实意义。
So it is practically important to carry on the study on the whole structure of 3d FEM model.
大型整体薄壁构件的筋板在数控铣削加工过程中将产生变化的弹性变形，用常规的有限元软件直接分析很费时费力。
Rib in large thin-walled structures will generate elastic deformation in NC Milling, it is very inconvenient to analyze the elastic deformation by conventional method directly.
大型整体薄壁构件的筋板在数控铣削加工过程中将产生变化的弹性变形，用常规的有限元软件直接分析很费时费力。
Rib in large thin-walled structures will generate elastic deformation in NC Milling, it is very inconvenient to analyze the elastic deformation by conventional method directly.
应用推荐