实验证明，有限元优化设计是正确、可靠的，效果是非常好的。
The experiment has proved that the optimum programming by finite-element method is correct, reliable and very effective.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
建立发动机、发动机安装结构、机体一体化的有限元模型，可全面考察发动机安装结构动力优化设计的成效。
Upbuild the incorporate finite element model for the engine, engine install and aircraft stracture, May entirely seeing about the effect for dynamical optimize design of engine install stracture.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析，完成了箱体结构的优化设计。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
阐述和分析了应用有限元方法进行结构优化改进设计的基本原理和所涉及的关键问题。
Fundamental principle and related key problems for the application of finite element method into structural optimal improvement design are expatiated and analyzed.
为了在单边核磁共振仪器外产生梯度恒定的磁场，提出利用基于拓扑优化和有限元法的优化设计方法。
To obtain a constant gradient magnetic field outside unilateral nuclear magnetic resonance (NMR), optimal design method based on finite element method (FEM) and topology optimization is proposed.
研究主轴电极头所受的液体阻力，为主轴支承件的有限元分析和优化设计提供详实可靠的理论依据。
Researching into the force will provide the detailed and reliable basis for the analysis of finite element method and optimal design of strut member.
基于汽车理论、有限元分析和优化设计方法，为解决工程实际问题，开发了汽车CAE软件系统。
An automotive CAE software based on automotive theory, finite element analysis and optimization design has been developed to resolve relevant engineering problems.
对模型进行了运动干涉检查，有限元分析和优化设计。
This paper carries on movement interference, finite element analysis and optimization design.
运用ANSYS软件进行压电智能梁结构的有限元分析和优化设计。
The finite element analysis and optimization design of piezoelectric intelligent beam was made based on ANSYS.
本程序的主要功能是实现与优化设计、有限元分析程序的联接，是一个较为实用的软件。
The main function of this program is to establish connection with optimization design and finite element analysis programs.
以ANSYS软件为开发平台，对某包装机械的零件进行了有限元分析和优化设计。
By using ANSYS software as a development platform, finite element analysis and optimal design is made to some packing machinery parts.
介绍了计算机辅助工程(CAE)技术中常用的两种技术：有限元分析和优化设计。
The paper introduces two technology: finite element analysis and optimal design, which are often used in computer-aided engineering (CAE).
基于可靠性理论，结合有限元结构优化方法进行某悬架下摆臂的轻量化设计。
Based on reliability theory, combined with finite element method for structure optimization, the lightweight design for the lower arm of a suspension is conducted.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
探讨通过UG设计平台，如何将优化程序、3D模型建立、有限元分析等，有机集成于外啮合齿轮泵齿轮3D设计和分析中去。
The method was discussed for how to integrate optimizing and building model with finite element analysis on 3D development and analysis of outer-tooth gear pump through UG design platform.
对碳纤维赛车车架进行了有限元分析，并优化了碳纤维铺层设计。
This paper analyzes the frame of carbon fiber racing bicycle with finite element method, and optimizes the carbon fiber pavement design.
基于支承法兰盘的结构特征，通过目标函数的建立、设计变量的选取以及约束条件的确定建立了优化设计的有限元模型，并对法兰盘进行了静力分析。
Based on the structural characteristics of bearing flange, the optimization model is established according to the objective function, design variables and constraints, and make a static analysis.
利用基于有限元法的拓扑优化技术设计车身大骨架的拓扑结构。
The design of the body frame topologic structure is presented, using FEM-based topological optimization technique.
通过微型计算机，用有限元法计算某类传感器，为优化设计建立一个清晰的数学模型。
This paper descripes simulation of some kinds transducers using a microcomputer based on the finite element method and sets up the clear mathematic models for the optimum designs.
本文利用通用化有限元分析软件ANSYS作为分析工具，对真空吸夹具的密封关键部位及密封元件进行了有限元静态分析和优化设计。
The static analysis and structural optimization of the key seal parts and components of vacuum clamp are researched in this thesis using finite element analysis software ANSYS.
利用ANSYS有限元软件，通过电场分析和优化设计，对电沉积技术中所用的象形阳极进行了形状设计。
Based on the process of electric field analysis and optimum design, the shape of the conformal anode used in electrodeposition is designed by the use of the FEM software, ANSYS.
优化结果显示，采用非线性有限元法和优化方法对卡环连接结构进行设计能够取得满意的效果，设计结果满足工程要求。
Optimization results show that this structure optimization method based on nonlinear finite element analysis is effective in joint structure design and the engineering demands are well satisfied.
采用有限元法对加氢反应器裙座支撑区进行有限元分析及优化设计，并对其危险截面作应力评定和强度校核。
The finite element method is applied to analysis and optimize the design of the hydrogenation reactor skirt support area, and stress of the risk section is assessed and strength is checked.
目前，在汽车变速器的开发中，有限元方法、优化设计和可靠性设计等现代设计方法逐步得到应用。
At present, modern design methods such as finite element analysis, optimization design, reliability design and etc. are gradually applied in the automotive transmission developing work.
并以额定一次电压35KV，额定二次电压100V，额定频率50HZ的电压互感器为例，进行了有限元分析计算和优化设计。
As an example, Finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35KV, rating secondary voltage 100V, rating frequency 50HZ.
有限元计算模型的建立，对于火炮结构优化设计、缩短研制周期和降低火炮设计人员的劳动强度都具有重要意义。
To the designers of the gun, the building of FEM model is very useful in structural optimization design by shortening the period of design and reducing work intension.
有限元计算模型的建立，对于火炮结构优化设计、缩短研制周期和降低火炮设计人员的劳动强度都具有重要意义。
To the designers of the gun, the building of FEM model is very useful in structural optimization design by shortening the period of design and reducing work intension.
应用推荐