三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
利用ANSYS和MATLAB软件，对缩放型片材机头中熔体的速度、压力和剪切应力的分布进行三维有限元模拟和分析。
Softwares ANSYS and MATLAB were employed to analyze and simulate the velocity, pressure and shear stress distribution in sheet extruder dies based on the three-dimensional FEM.
利用ANSYS有限元分析软件，采用三维非线性有限元方法对柴油机曲轴中频淬火瞬态温度场进行了模拟计算；
The three dimensional non linear finite element analysis of the transient temperature field during intermediate frequency quenching of diesel crankshaft was simulated by using of ANSYS.
应用三维弹性有限元方法对连铸机扇形段框架体进行分析计算的关键在于结构计算机模拟的可能性和可行性。
The computer simulation procedure is the key to analyzing the mechanical behaviors of the continuous casting segment tower structure using threedimensional finite element analysis method.
利用大型有限元计算软件ANSYS进行以三维模型为基础的L型机头内部流动速度分析和模拟研究。
The FEM software ANSYS was employed to analyse and simulate the flow velocity in L shape sheet extruder die based on a three dimensional model.
借助ANSYS有限元软件建立CCGA624器件的三维条状模型，基于应变对焊柱可靠性进行优化模拟分析。
ANSYS software was employed to establish three-dimensional strip model of CCGA624 device and optimized simulation of soldered column dimension was also studied.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用A NSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
Three-dimensional flow simulation of mixing blocks in a conical twin screw extruder is performed with a fi nite element package, ANSYS.
三轴转台框架系统的三维模拟与分析，采用CAE技术，使用PATRAN有限元软件。
The CAE technology and PATRAN finite element software were used in three-dimension simulation and analysis for three axis turntable frame system.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
本文利用ANSYS和MATLAB软件，对鱼尾型片材机头中熔体的速度、压力、剪切应力和粘度的分布进行三维有限元模拟和分析。
The software ANSYS and MATLAB were employed to analyze and simulate the velocity, pressure, shear stress and viscosity distribution in fishtail sheet extruder die based on the three-dimensional FEM.
采用现场测试研究、室内岩心实验、测井资料分析及三维有限元数值模拟技术，获得了史深100地区的现代构造应力场。
The modern tectonic stress field of Shishen 100 area has been found by in situ testing, laboratory core experiment, logging data analysis and 3D finite element numerical simulation.
结合实测地应力资料，建立了三维非线性有限元地应力反演分析数值模型，模拟了断层及裂隙密集带。
Based on the measured ground stress data, a 3d non-linear finite element back analysis numerical model for ground stress is set up and the fault and fissure concentrated zone is simulated.
利用三维有限元分析方法模拟了人体头部与复合材料层板发生柔性撞击时的整个动态响应过程。
The whole dynamic response process of the flexible impact between the human head and the composite material veneer is simulated using the3D finite element analysis method.
应用三维有限元分析，采用增量计算方法，对某围堰工程承台钢板桩围护结构进行了动态施工力学的三维数值模拟。
The staged construction mechanics of the steel sheet pile retaining structure for a cofferdam project are numerically simulated using 3D FEM incremental computing method.
运用基于有限元的C FD分析软件POLYFLOW，对五种销钉注塑螺杆的计量段进行了三维瞬态模拟。
By using finite element CFD analysis software POLYFLOW, 3-d transient simulations have been made on the measurement of the five kinds of pin injection screws.
泵的三维模型不但可以用于零件装配、干涉检查、加工模拟，而且可以为有限元分析(FEA)和计算流体动力学(CFD)分析提供计算模型。
The 3-d pump model cannot only be used in assembly, intervene inspection and process simulation, but also provide computational model for FEA and CFD.
利用三维弹塑性有限元软件L S- DY NA对一种典型偏心轴类零件楔横轧成形进行了数值模拟，分析了其成形过程、应力应变场分布及工艺特点。
The cross wedge rolling deformation process of shaft parts with eccentric section was simulated with three-dimension finite element soft LS-DYNA by using elastic-plastic finite element method.
针对深基坑土钉墙支护，采用三维非线性有限元分析方法，模拟研究了深基坑的开挖与支护过程。
In accordance with soil nailing for deep excavation support, the 3-dimensional nonlinear FEM analysis and calculation was used to simulate the process of construction.
首先，采用挡土墙理论科学合理地确定了松散体注浆加固的范围，并运用三维有限元程序对注浆体的稳定性进行了模拟分析。
First, fixed the area of grouting consolidation used the theory of retaining wall, and used 3-D finite element program to simulate the stability of it.
方法：建立种植全口固定义齿和种植全口覆盖义齿的三维有限元模型，然后进行侧方咬合平衡与不平衡、前伸咬合平衡与不平衡模拟加载分析。
METHODS: A 3-D finite element model of mandibular complete dentures supported by implants was established to analyze the stress status with protrusive or lateral occlusions.
采用三维热机耦合有限元模型和静力隐式算法，对多道次连轧稳态轧制过程进行模拟分析。
Marc, this paper deals with modeling of steady deformation process in multi-pass continuous rolling process with a 3D thermo-mechanical coupled FE model and static implicit algorithm.
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model is established, and simulate analysis in all process is completed.
用三维有限元数值模拟方法分析了太阳辐射强度对不同朝向墙面饰面层空鼓检测效果的影响，与实际检测工程相比较，提出不同朝向采取不同的最佳检测时间的方法。
The idea of inspecting wall with different orientation at the best time is proposed after simulating the effect of the the radiation on the building by means of 3D FEM method.
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model...
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model...
应用推荐