用高斯-牛顿误差最小法将六维观测量转化为四元数，作为观测量的一部分，显著减少了直接使用EKF的计算量。
Gauss-Newton error minimization is used to transform six-dimentional reference vector to quaternion as a part of observations for EKF, which significantly reduces the computational requirement.
最小区域法是符合最小条件的一种直线度误差评定方法，但较难实现。
The minimum zone method meets the minimum condition for evaluating the straightness, however it is difficult to accomplish computerization.
本文将最小误差激励(mee)法推广应用于多机电力系统分散输出反馈控制器的设计。
This paper proposes the application of extended minimum error excitation (MEE) method to designing decentralized output feedback controllers for multi-machine power systems.
本文介绍了直线度误差最小评定的0.618法和凸多边形法，并给出了这两种方法的高级语言程序。
The 0.618 method and the convex polygon method for minimum condition evaluation of straightness error are introduced, and their high-level language programs are given in this paper.
在测量尺寸时，依据图像分割所提取的轮廓，使用自编程序利用最小区域法对圆度误差进行评定，并计算、测量链板的孔径和节距。
Roundness error is evaluated by minimum region law. The diameter of the holes and the distance between the axes of two holes are calculated and measured by program.
一维最小误差阈值法假设了目标和背景的灰度分布服从混合正态分布。
One-dimensional minimum error thresholding method assumed that the histogram distributions of object and background are governed by a mixture Gaussian distribution.
利用最小有向距离原理，提出了斜航式法向圆弧锥齿轮传动的误差分析仿真算法。
Based on the principle of "minimal orientation-distance", an emulation algorithm of error analysis is put forward for transmission of loxodrome normal circular-arc bevel gear.
本文提出了可进行条纹非均匀性校正的最小均方误差法(MMSE)。
We develop the minimum mean square error (MMSE) method for stripe nonuniformity correction (NUC).
用最小区域法求直线度误差，是在最小二乘法的基础上探讨的一种符合最小条件的新方法。
Computing straightness error on the basis of least square method by way of smallest field method is new method in exploring the minimum condition.
详细分析了用最小二乘法和最小包容区域法评定形状误差测量结果时的不确定度估计问题。
The problems of uncertainty estimation are analyzed in detail when measurement results of form errors are evaluated with the methods of least-square and minimum zone.
用吉文斯变换法解算误差方程的结果与用最小二法解算的结果是一致的。
The result iS unanimity to solve error equations using Givens Transformations and using the least square method.
通过与用最小区域法测得的误差结果相比较证明，该方法是行之有效的。
By comparing it with the errors measured by the least area method, it is proved that this method is effective.
利用最小二乘法，建立过热蒸汽的密度与温度、压力之间的函数关系，实现过热蒸汽的空间曲面补偿法，力求测量误差达到最小。
Use method of the least squares to build function relation between temperature and pressure, the space camber compensation method is realized and makes THD measuring error least.
IRST的被动定位实质上是一个动态三角测量法，对于固定目标，可以利用多次测量和最小二乘法降低定位误差。
The passive orientation of IRST is a dynamic triangle measurement. For the fixed target, the orientation error can be minimized by multiple measurements and the least squares(LS) method.
根据最大误差最小法的基本原埋，对矩形花键滚刀法向齿形的双圆弧参数进行了优化，使滚刀加工出的工件齿形误差最小。
Based on basic theory of maximum error minimum method, double arc parameters for normal tooth outline in rectangle spline hob are optimized to obtain tooth outline in workpiece with minimum error.
研究了几种直线度误差评定方法，其中最小区域法符合最小条件，应作为直线度误差评定结果的仲裁依据。
A few of methods of evaluating straightness error are researched. Minimum zone method tally with minimum condition, so it is ruling basis of evaluating straightness error.
本文根据圆度误差的数学模型，论述了评定圆度误差的最小二乘法、最小区域法和谐波分析法。
Based on the mathematical model of circularity error, the least square method, minimum envelope zone method and harmonic analysis method for evaluating the circularity error are treated.
介绍按最小外接圆法、最大内接圆法评定圆度误差的一种快速、简便、易于微机实现的数据处理方法。
The data processing method for evaluation the circularity error with minimum circumscribed circle and maximum incircle was introduced. The method is quick and convenient to realize on computer.
介绍按最小外接圆法、最大内接圆法评定圆度误差的一种快速、简便、易于微机实现的数据处理方法。
The data processing method for evaluation the circularity error with minimum circumscribed circle and maximum incircle was introduced.
推导了用最小平均误差法获得最佳配齿及误差的计算公式。
Calculating formula has been inferred. We minimum average error method to attain best gear distributed rate and to calculate minimum error.
本文进行误差分析。提出一个不需要迭代的最小范数估计的导线最小侧边权逆法。
In this paper the error analysis is conducted. It presents a least side length weight inverse method of traverse for minimum norm estimate without iteration.
用最小包容区域法求平面度误差。最小包容区域判别准则有三角形准则和交叉准则。
Flatness error was obtained by minimum zone law which decided by triangle rule and cross rule.
提出一种用最小区域法进行误差评判时的数据处理算法——最佳脊线法。
This paper introduces the application of computers in the measuring system from a new perspective, and puts forward an algorithm to judging the errors with the minimum area principle.
指出目前规范中五点法误差最小，其它方法对床沙质均有较大系统误差。
It has been pointed out that the five-point method specified in the current code gives values with smallest errors, whereas markedly small systematic errors are found in relation to all other methods.
介绍一种按FGF判断法求符合最小条件直线度误差的快速算法，该算法很容易在计算机上实现，具有简单、明了的特点。
This paper introduces the fast calculating method in accordance with least condition linearity error with FGF judging method. The method is Yery easy to complete with computer, simple and clear.
提出了一种满足最小区域法的曲面形状误差评定方法。
A method for calculating the surface form error with the requirements of the minimal zone is proposed.
前一种算法根据最小恒模误差准则给出了求解加权矢量的新的代价函数，并使用直接搜索法计算对角加载值的最优解。
The former presents a novel cost function based on MCME criteria for the weight vector of antenna array, with direct searching method searching for optical diagonal loading value.
介绍了基于最小二乘圆法的圆度误差的评价方法。
The assessment method of circular degree error is introduced based on minimum mean-square value method.
介绍了基于最小二乘圆法的圆度误差的评价方法。
The assessment method of circular degree error is introduced based on minimum mean-square value method.
应用推荐