“最大信号电平”是指能够切换但又不会损坏开关卡的电压、电流和功率的最大值。
"Maximum signal levels" refers to the highest levels of voltage, current, and power that can be switched without damaging the switch card.
在这种情况下，电流达到最大值所需的时间改变了。
In this case, the time necessary for the current to reach its maximum value is changed.
在评估最大电压或最大电流水平时，要想达到规定的寿命，则必须考虑继电器的功率额定值。
When evaluating either maximum voltage or maximum current levels, the power rating of the relay must also be considered if the specified life is to be attained.
最大正向整流电流该参数与灯功率有关，所选二极管的额定电流值至少应是交流母线中峰值电流的3倍以上。
Biggest positive the parameters associated with the lamp power rectifier current, the rated current value of the selected diode should be a peak current in ac bus at least more than 3 times.
为防止损坏开关卡，需验证最大电流和最大电压的乘积没有超过开关卡的功率额定值。
To prevent damage to the switch card, verify that the product of the maximum current and maximum voltage does not exceed the power rating of the switch card.
领先桥臂中点电压变换期间，变压器初级电流基本保持最大值，使得领先桥臂容易实现软开关；
In the midpoint voltage of leading leg transition, its soft switching is easily realized because of the primary current of transformer keeping the maximum.
电源及能调节交流或直流电流在期望值的5%之内的，控制开路电压到最大20毫伏的路。
Power supply or circuit capable of regulating either alternating or direct current within 5% of desired value, and limiting the open circuit (source) voltage to 20 millivolts maximum.
利用一个由恒流脉冲发生器和数据采集卡组成的简单测试系统测得制冷器在小电流下的电阻电压和塞贝克电压，通过这两个电压推导出ZT值、最大制冷温差。
The resistance and Seebeck voltages used to calculate the ZT and the maximum temperature difference are measured using a testing system composed of a DC pulse generator and a DAQ card.
在输入电压最小值，负载为满载条件下，最大输入电流不大于1.5 A。
The input current should be less than1.5A, under minimum AC input and full load.
结果表明，随着驱动电流和频率的增加，驱动膜有一个最大的位移值。
The experimental results show that there is a maximum displacement of the film when increasing the actuating current and frequency.
在太阳能光伏并网发电系统中，为了获得最大输出功率，并网电流幅值要随外部环境变化而变化。
The amplitude of grid-connected current should change with external environment in order to obtain maximum output power of PV arrays.
如果观察输入和输出最大箝压电流额定值IIK和IOK，会发现输入和输出电压额定值VI和VO已经可能超过。
The input and output voltage ratings, VI and vo, may be exceeded if the input and output maximum clamp-current ratings, IIK and IOK, are observed.
电镀工艺参数主要包括电流密度、温度、PH值、搅拌、阴阳极和换向电流等因素，其中影响最大的是电流密度。
Electroplating technological parameter includes factors of ampere density, temperature, PH value, stir, negative and positive pole. The maximum influencing factor is ampere density.
在电力系统防雷保护与雷电特性基础研究工作中，雷电流的最大陡度、幅值具有重要的意义。
The max lightning steepness and lightning peak current have the important significance to the base researching work of the lightning-protection in the power system and the lightning characteristics.
调制阴极保护电流而产生的轴频电场最大的幅值比调制腐蚀电流所产生的电场大10倍之多。
The amplitude of electric shaft-frequency electric field by modulating the current of ICCP system is 10 times greater than that of corrosion current.
在最小值熔丝或断路器紧挨最大额定电流40安培的电池。
At a minimum there must be a fuse or circuit breaker located close to the battery rated at 40 amps maximum.
交流交流是指电流在正负最大值之间以特定的频率变动，通常频率为50或60赫兹。
Ac Alternating current (ac) is electric current that alternates between a positive maximum value and a negative maximum value at a characteristic frequency, usually 50 or 60 cycles per second (Hertz).
测试中的暂态过电压、暂态电流最大值均未超过设计和规程允许值。
Measurement results show that the maximum values of the measured transient voltages and currents have not excessed the designed values and allowable values specified in the standards.
电路部分具备过流保护功能，当电流超过一定额定值时，保险丝断开机器停止工作，最大限度的保护机器安全。
Some have over-current protection circuit, when the current exceeds a certain rating, the fuse disconnects the machine to stop working to maximize the protection of machine safety.
介绍了单相接地故障行波选线原理，故障线路电流初始行波幅值最大，极性与非故障线路相反。
Its principle is presented: the amplitude of initial traveling wave on faulty feeder is higher than those on other feeders and its polarity is in inverse.
当输入交流电压为额定值的下限时，输出电压负载满载，最大输入交流电流2.5A。
5Arms max At any input voltage and rated, DC output rated load.
当输入交流电压为额定值的下限时，输出电压负载满载，最大输入交流电流2.5A。
5Arms max At any input voltage and rated, DC output rated load.
应用推荐