并根据模拟计算结果，提出了最佳设计条件，并对有关能耗进行了分析。
According to simulation results, the optimization design conditions are raised and related energy consumption is also analyzed.
关于风、太阳和影子的现实因素也符合了景观设计师的工作，以便为植物和人提供最佳条件。
Facts about wind, sun and shade qualify the work of the landscape architects in order to provide optimal conditions for both vegetation and humans.
通过试验设计，不仅可以弄清楚试验过程中自变量对于因变量的影响的大小和趋势，还可以寻找其最佳试验条件。
Experimental design may not only clarify influence of the independent variable on the dependent variable in the testing, but also seek its best test condition.
通过试验设计，不仅可以弄清楚试验过程中自变量对于因变量的影响的大小和趋势，还可以寻找其最佳试验条件。
Through experimental design, not only may clarify in the testing the independent variable regarding the dependent variable influence size and the tendency, but also may seek its best test condition.
从能量原理出发，以最小应变能为控制条件，给出两点吊吊点最佳位置的设计。
Starting from the energy principle and regarding the minimum strain energy as control condition, we get the best position design of the hanging point.
首先推导了双层筒体基于最佳化设计原则的缩套界面压力的计算公式及径比条件。
First of all, the equation of shrunk interface pressure and the condition of diametrical ratio are deduced under the optimal design principle of shrunk double-layers cylinder.
最佳工艺条件确定采用正交设计法。
The best process conditions were defined by method of perpendicularity designing.
采用L9（34）正交设计，确定了最佳的保脆技术和杀菌条件。
Using L9(34)orthogonal experiment design, the best technique for brittleness keeping and sterilization condition were found out.
研究了不同碱对柠檬肟的催化脱水效果及不同PTC的催化作用效果，并用正交实验设计法确定了使用KOH- TBAB催化脱水法合成柠檬腈的最佳反应条件。
The catalytic dehydration of lemonile with various alkalis and PTC was studied. The optimal conditions dehydration to lemonile for KOH TBAB catalytic by orthogonal design were determined.
均匀设计能较好地获得实验的最佳工艺条件，均匀设计可以在天然产物有效成分的提取中推广应用，以提高工作效率。
Even-design method could easily get the best extractive craft conditions of the experiment, it could be commended to improve work efficiency in the field of natural produce extraction.
本文对合成反应器的设计和最佳的操作条件进行了研究，以期提高生产规模与产品收率。
In this paper, study was carried out to design synthesis reactor and chose the optimal parameters of operation, aiming at enlarging production capacity and increasing yield.
由于外界条件的变化与差异，泵站的实际运行工况总是或多或少地偏离设计最佳工况。
Because of the change and difference of external condition, practical operating mode of pumping station always deviates from the design's more or less.
通过正交设计及极差分析法确定了最佳工艺条件。
The optimum technological conditions were determined by orthogonal test and extreme difference analysis.
把细菌纤维素添加到鲜奶中进行发酵，采用正交实验设计确定乳酸菌发酵的最佳条件。
Adding bacterial cellulose to fresh milk to ferment, the optimum fermented condition was studied by orthogonal experiment.
采用四因素三水平正交实验设计，以DH为指标，对蛋白酶水解酪蛋白的条件进行优化，以获得几种蛋白酶的最佳反应条件。
Taking DH as index, orthogonal design of four factors three levels was taken to optimize the hydrolysis condition of casein with proteases.
用正交设计法，确定了最佳工艺条件。
The optimum conditions are determined by experimental design methods.
通过正交设计及极差分析法确定了最佳工艺条件，产品收率达80%以上，纯度可达94%。
The optimum technological conditions were determined by orthogonal test and extreme difference analysis. The yield of product reaches over 80%, and the purity is up to 94%.
利用正交实验设计法优选出质子交换膜燃料电池(PEMFC)电极催化层制备的最佳条件，即制备亲水电极。
The optimal composition of catalyst layer in proton exchange membrane fuel cell (PEMFC) electrode was prepared through orthogonal method, which is called hydrophilic electrode.
为了探索合成的最佳条件，我们采用了均匀实验设计法。
In order to obtain the optimum of synthesis, we plan to use the uniform design to arrange the experiment.
在新设计制造的HLX - 1型树脂固化仪上对t _(31) -环氧树脂e51进行了最佳配方和最佳条件的选择。
New HLX-1 resin Curometer has been designed and built, by which the curing conditions of T31-epoxy resin E51 system was optimized.
专为沃尔沃收音机设计的天线系统可以在所有条件下提供最佳的接收效果。
Aerials specially designed for Volvo's radio units to provide the best reception under all conditions.
本文为中低速内燃机配气机构的最佳设计，提供了统一的优化模型——条件泛函极值问题。
In this paper, we present a unified optimal model, i. e., the minimizing functional with constraints for the optimal design of critical and low velocity internal combustion engine valve mechanism.
传统的实验设计与分析方法为首先进行正交实验设计，然后对实验结果进行回归分析和方差分析以确定最佳工艺条件。
Traditional methods for experiment design and analysis is to design orthogonal experiment first, and then make regression analysis and variance analysis to search the optimal technological condition.
利用正交实验设计与分析方法，得到实验条件范围内玉米芯超临界水气化制氢的最佳反应参数，同时对气化过程主要操作参数的影响进行了分析。
Using orthogonal experimental method, the influences of the main parameters on corn cob gasification were investigated, and the optimum parameters in the experiment conditions were obtained.
运用正交试验设计理论，对高产L-乳酸突变株NAF-032的最佳摇瓶发酵条件进行了研究，确定了最佳的发酵培养基和发酵条件。
The optimal fermentation medium and conditions of mutant strain NAF-032 with a higher and stable yield of L-lactic acid were studied by orthogonal design theory.
运用正交试验设计理论，对高产L-乳酸突变株NAF-032的最佳摇瓶发酵条件进行了研究，确定了最佳的发酵培养基和发酵条件。
The optimal fermentation medium and conditions of mutant strain NAF-032 with a higher and stable yield of L-lactic acid were studied by orthogonal design theory.
应用推荐