该设备的最佳除油率大于90%。确定了最佳操作参数。
The optimum operating conditions were studied and the oil removal efficiency was more than 90%.
利用GC- 900气相色谱分析仪检测甲苯的浓度,通过正交实验得出了实验过程的最佳操作参数。
GC-900 gas chromatography apparatus is used to detecting the concentration of methylbenzene gas, and the best parameters of this experiment equipment are got by doing orthogonal experiment.
通过前期试验发现乙醇和异丙醇的分离较难,所以运用正交实验设计法,确定最佳操作参数,获取优化的分离度。
Because ethanol and isopropyl alcohol is difficult to separate, the orthogonal experiment design is used to define the best operation parameter and to obtain the optimization resolution.
本文研究了利用二次通用旋转组合设计来进行多因素影响的振动流化床喷雾造粒试验,建立数学模型,得出了具有一定参考价值的最佳操作参数。
Based on the quadratic general rotary unitized design, the experiments effected by multiple factors have been made on vibro - fluidized bed spray granulation in this paper.
研究了旋流处理工艺流程及操作参数、悬浮液性质对处理效果的影响,确定了最佳工艺条件。
The influence of separation process flow, operating parameters and the properties of suspending liquid on the treatment effect was studied, and the optimum process conditions were determined.
运用硝酸铵钙产品开发试验数据,分析影响硝酸铵钙造粒过程的因素,并提出了最佳的操作参数。
The factors that influence the granulating course of calcium ammonium nitrate are discussed, based on the experiment data. Meanwhile the optimum parameters are also presented.
燃油系统产生的时间上的需求,实际操作和设置一个集成环境的最佳参数,使水到燃料转换过程的效率高的作品。
The system produces fuel on demand in real-time operation and sets up an integrated environment of optimum parameters so that a water-to-fuel conversion process works at high efficiency.
探讨了杨桃果奶的生产工艺流程和操作要点,采用正交试验和感官评定确定了最佳工艺参数为:鲜牛奶8%、杨桃汁8%、白砂糖15%、柠檬酸0。
By the orthogonal experiment and organoleptic evaluation, the optimal technological parameters were determined as follows: fresh milk 8%, Carambola fruit juice 8%, sugar 15%, citric acid 0.
通过优化模型计算求解得到最佳的工艺操作参数。
The result of solving the optimization model was the optimal process operating parameters.
研究了连续操作时的最佳工艺参数。
The optimal operation parameters of continuous production were studied.
所得到的最佳参数、工作区域图及工作效率曲线对氨吸收制冷流程和操作参数的选择具有较大实用价值。
The obtained optimum parameters, working region diagrams and working efficiency curve diagrams have more practical value in selecting AAR process and operating parameters.
结论:高质量的儿童CTVE图像依赖于扫描重建参数的合理选择、最佳的观察阈值及方位的选择,以及操作者的技巧和熟练程度。
Conclusion:A superior CTVE image depends on optimal selection of the scanning reconstruction parameters, display setting and threshold values, as well as the operator′s experience and skills.
求出最佳设计参数、操作参数。
The optimum design parameters and operation parameters were derived.
采用正交实验设计,研究了卡拉胶碱改性操作中碱浓度、改性时间和温度的优化,确定了适合工业生产的最佳工艺参数。
The factors affecting the alkali-treatment including NaOH concentration, time and temperature were studied by the orthogonal experiments. The optimum conditions for industry have been determined.
进一步研究表明,该混合催化剂适于在较低温度下使用,最佳液化温度随其它操作参数变化。
Further studies show that relatively low temperature is favorable for this blend catalyst. The optimum liquefaction temperature varies with the variation of other reaction conditions.
通过热力学方程的推导和中试实验,分析了吸收式热泵性能参数随不同操作条件变化的规律,并讨论了最佳参数的选择问题。
By thermodynamics equation describing and pilot plant research, the effect of different operating conditions on their performance is studied and analyzed.
试验结果表明:水力空化对若丹明B确实有降解作用,处理系统中存在最佳的孔板几何参数和操作运行条件,并且若丹明B的降解速率随修正空化数的减少而增大。
There are the optimal geometric parameters and operating conditions in the system and the degradation rate of rhodamine B increases with decreasing the value of the modified cavitation number.
利用正交实验设计与分析方法,得到实验条件范围内玉米芯超临界水气化制氢的最佳反应参数,同时对气化过程主要操作参数的影响进行了分析。
Using orthogonal experimental method, the influences of the main parameters on corn cob gasification were investigated, and the optimum parameters in the experiment conditions were obtained.
分析结果表明:在微孔半径一定时,对微孔操作参数进行优化,可使密封性能达到最佳。
Results show that optimum operating parameters maximize the sealing property as the radius of the micro-pores is constant.
通过模拟研究,给出了静电力发挥最佳作用时的除尘工艺操作参数,为工业大规模应用该技术提供理论依据。
The relevant technical parameters have been obtained in the simulation study, which provide the theoretical basis for large-scale application in the industry.
通过模拟研究,给出了静电力发挥最佳作用时的除尘工艺操作参数,为工业大规模应用该技术提供理论依据。
The relevant technical parameters have been obtained in the simulation study, which provide the theoretical basis for large-scale application in the industry.
应用推荐