这些参数间的关系可作为最佳采集参数设计和处理方法选择的一种依据。
The relationship of these parameters can provide an evidence for optimal acquisition parameter devising and processing .
对铁氧体法处理含铬废水工艺中的主要技术参数进行了探讨,为选择最佳工艺条件提供了依据。
The principal technical parameters of ferrite process for treatment of chromium containing wastewater are studied, it provides a basis for selection of the optimum process conditions.
就灯芯绒织物的短流程前处理工艺进行了探讨,并对工艺参数、各助剂种类用量进行了筛选,给定最佳工艺路线和工艺处方。
Probe is made in short process of pretreatment of corduroy. Process parameters and dosages of auxiliaries are selected, thus the optimal process route and recipe are given.
本文用正交设计法研究了臭氧气体对炭纤维表面的连续氧化处理的最佳工艺参数。
In this paper was studied optimum technology parameter of the oxidation treatment in succession of the ozone gas against the surface of carbon fibers with the method of rhombic design.
而电刺激治疗是在对肌电信号分析处理的基础上,选择和控制电刺激器的刺激参数,以达到最佳的刺激治疗效果。
In the electrical stimulation therapy, the parameters of electric stimulator are selected and controlled on basis of analyzing and processing EMG signal. So it can get the best treatment effects.
目的:通过对微波预处理过程以及热水洗涤过程的影响因素分析,得到最佳提取工艺参数。
Objective: the best operation condition of extraction was found through analyzing the influences of both process of microwave pretreatment and hot wave washing.
采用SCOGSZ计算机程序处理实验数据,确定了各二元体系的最佳化学模型,求得了有关参数。
By applying computer program SCOGSZ, the best chemical models and related parameters at experimental conditions were determined also.
通过实验,我们找到最佳的处理参数,同时对其反应机理进行了探讨。
Based on experiments, the optimal treatment parameters have been found. And its reaction mechanisms have been discussed.
研究了焙烧法处理粗苯精制废酸的工艺过程,探讨了最佳运行参数,优化了工艺流程。
The process for the treatment of the waste acid from crude benzol refining with calcining process is studied, the optimum operation data are discussed and the process is optimized.
研究了旋流处理工艺流程及操作参数、悬浮液性质对处理效果的影响,确定了最佳工艺条件。
The influence of separation process flow, operating parameters and the properties of suspending liquid on the treatment effect was studied, and the optimum process conditions were determined.
基础资料的研究是处理好地震数据的关键,基础资料的研究包括认真检查原始资料,确定最佳参数和处理流程等方面。
The study on basic data is the key to good seismic data processing, which includes scrutinizing the original data, determining optimum parameters and processing procedure etc.
通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。
The optimal parameters of type DJ4 locomotive axle heat treatment are explored by test.
最后依据上述实验得出的最佳工艺参数范围及合适的热处理制度进行锻件工艺试制,确定主导工艺。
At last we can decide the leading technique by using the best scope of technique parameters and the suitable thermal treatment system gained by above experiment to test a forging technique.
本文研究了热处理和冷变形对铜铬锆电极合金性能的影响,并确定了电极合金的工艺最佳参数。
In this paper, the effect of cold-work and heat treatment on the properties of Copper-Chromium-Zirconium electrode alloy is dealt with, its optimum processing parameters established.
试验结果表明:水力空化对若丹明B确实有降解作用,处理系统中存在最佳的孔板几何参数和操作运行条件,并且若丹明B的降解速率随修正空化数的减少而增大。
There are the optimal geometric parameters and operating conditions in the system and the degradation rate of rhodamine B increases with decreasing the value of the modified cavitation number.
本文分别针对数据的预处理、训练数据集大小以及输入向量的大小分别进行了研究,以确定使用BP神经网络预测的一个最佳参数组合。
Raw data preprocessing, the size of training data, as well as the size of input vectors have been studied separately, to find out the best parameter set of BP neural network prediction.
它具有根据环境情况自适应调整参数以实现最佳处理的能力。
It can carry out a best result by modifying parameters according the environment.
卡尔曼滤波在数学上是一种统计估算方法,通过处理一系列带有误差的实际量测数据而得到的物理参数的最佳估算。
Kalman filter in mathematics is a statistical estimation methods, By a series of errors with the actual measurement data and the physical parameters of the best estimate.
可通过设计合理而稳定的温场,选择最佳工艺参数及退火处理等方法,减少热应力而引起的晶体开裂。
During designing stable temperature field and selecting rational technology parameter and annealing process, perfect crystal was grown.
采用填料式水解酸化与好氧接触氧化联合工艺处理生活污水效果好,其COD、BOD_5、SS去除率分别高达87%,92%,90%,试验得出了最佳设计参数和合理可行的流程组合。
The removal efficiencies of COD, BOD_5 and SS are 87% 92% and 90%respectively. The optimum design parameters are presented and the reasonable and feasible process units are determined.
找出了附碳处理的最佳工艺参数,并指出确定最佳参数的依据,这对附碳处理工艺在流态化预还原中的工业应用具有重要的价值。
A scientific basis of parameter option is put forward. This is very importment to the use of carbon-black adheresion in fluidization pre-reduction.
通过实验确定了冷凝水处理过程中的吹脱及氧化的最佳工艺参数。
The optimal parameters of blowing and catalyzed oxidation in the process of condensed water disposal were determined thro...
本文重点讨论了不同参数条件对废水预处理效果的影响,得出了最佳工艺参数。
Simultaneously, the biodegradability of wastewater can increase. Results of wastewater treatment with different parameters are discussed and the technological p…
本文重点讨论了不同参数条件对废水预处理效果的影响,得出了最佳工艺参数。
Simultaneously, the biodegradability of wastewater can increase. Results of wastewater treatment with different parameters are discussed and the technological p…
应用推荐